HVAC
Plumbing
ELECTRICAL
Tools & Test Instruments
Categories
Price
Type List
- Air Return Diffusers
- Aluminum Bar Type Return Air Grille
- Aluminum Bar Type Sidewall/ Ceiling Register
- Aluminum Ceiling Diffusers
- Aluminum Curved Blade Sidewall/Ceiling Register
- Aluminum Foil Ducting
- Aluminum Sidewall Multi-Shutter Registers
- Bar Return Air Filter Grille
- Bar Type Sidewall / Ceiling Register
- Baseboard Return
- Baseboard Return Air Grilles
- Butterfly Dampers
- Ceiling Diffuser
- Ceiling Diffuser w/ Round Grille
- Coil Insulated Drain Hose
- Commercial Aluminum Return Grilles
- Commercial Filter Grilles
- Commercial Grilles
- Commercial Perforated Face T-Bar Grilles
- Commercial Steel Return Grilles
- Commercial Supply Registers
- Commercial T-Bar Egg Crate Return Grilles
- Commercial T-Bar Insulated Perforated Diffusers
- Compact Overflow Switch
- Condensate Drain Line Pump
- Condensate Pump
- Curved Blade Registers
- Curved Blade Sidewall / Ceiling Register
- Diffuser and Dampers
- Drop Ceiling Flange
- Duct Rings
- Duct Strap
- DynAir Dial-A-Matic™ Commercial Damper Regulator
- DynAir Kwiki™ Residential Damper Regulator
- DynAir Stick-Ons™ Insulation Fastener
- DynAir VinylFlex™ Flexible Duct Connector
- Economy Trap Kit without Brush
- Evaporative Cooler Diffuser
- Face Return Air Filter Grille
- Fixed Bar Return Air Filter Grille
- Fixed Bar Return Air Grille
- Fixed Return Air Grille
- Flexible Aluminum Foil Ducting
- Flexible Rod Cleaning Brush
- Floor Diffusers
- Floor Grille
- Floor Registers
- Floor Return Air Grille
- Floor Return Air Grilles
- Flush Ceiling Diffusers
- Hanging Wire
- Low Clearance Grille w/ Damper
- Metal Duct Clamps
- Molded Fiberglass T-Bar Backs
- Multi Decorative Discharge Grille
- Multi-Stage Small Register Box
- Non-Insulated Light Weight Drain Hose
- Overflow Switch Combo Kit
- Perforated Return Panel
- Perforated T-Bar Diffusers
- Plastic Anchoring Kit
- Plastic Hanger Duct Strap
- Push Pin
- Return Air Filter Grille
- Return Air Filter Grilles
- Return Air Grilles
- Rough In Flange
- Round Ceiling Diffuser Accessori
- Round Ceiling Diffusers
- Secondary Overflow Switch
- Semi-Rigid Aluminum Ducting
- Sidewall/Ceiling Registers
- Snap-In Collars
- Spiral Diffusers
- Square ceiling Diffusers
- Square Ceiling Directional Diffuser
- Stamped Curved Blade Sidewall/Ceiling registers
- Stamped Return Air Grille
- Stamped Sidewall/Ceiling Register
- Switched Cross Trap with Brush
- T-Bar Lay-in Diffuser
- T-Bar Lay-in Return Panels
- T-Bar Return air Grille
- T-Bar Return Grille
- T-Bar Supply Grille
- Tbar Return Air Grille
- Telescoping Wall Sleeve
- Test Coupling
- Toe-Space Grilles
- Wall Bracket
- Waterless In-Line MiniTrap without Brush
- White Vinyl General Purpose Ducting
Brand List
Air Conditioning Installation Parts
Items 801 to 837 of 837 total
Steel
Fixed horizontal blades
1/2" spacing
Fins at fixed 45 degree angle
White finish
SKU:
270/24x12
Vendor:
TRUaire
Type:
Fixed Return Air Grille
Availability:
In-Stock
$38.00 USD
Steel
Fixed horizontal blades
1/2" spacing
Fins at fixed 45 degree angle
White finish
SKU:
270/24x10
Vendor:
TRUaire
Type:
Fixed Return Air Grille
Availability:
In-Stock
$39.10 USD
Steel
Fixed horizontal blades
1/2" spacing
Fins at fixed 45 degree angle
White finish
SKU:
270/24x08
Vendor:
TRUaire
Type:
Fixed Return Air Grille
Availability:
In-Stock
$35.70 USD
Steel
Fixed horizontal blades
1/2" spacing
Fins at fixed 45 degree angle
White finish
SKU:
270/30x12
Vendor:
TRUaire
Type:
Fixed Return Air Grille
Availability:
In-Stock
$62.70 USD
Steel
Fixed horizontal blades
1/2" spacing
Fins at fixed 45 degree angle
White finish
SKU:
27014X14
Vendor:
TRUaire
Type:
Fixed Return Air Grille
Availability:
In-Stock
$39.15 USD
Steel
Stamped face
White Finish
1/2" spacing
Counter-sunk screw holes
SKU:
170/12x12
Vendor:
TRUaire
Type:
Stamped Return Air Grille
Availability:
In-Stock
$10.80 USD
Steel
Stamped face
White Finish
1/2" spacing
Counter-sunk screw holes
SKU:
170/30x14
Vendor:
TRUaire
Type:
Stamped Return Air Grille
Availability:
In-Stock
$31.50 USD
Steel
Stamped face
White Finish
1/2" spacing
Counter-sunk screw holes
SKU:
170/24x14
Vendor:
TRUaire
Type:
Stamped Return Air Grille
Availability:
In-Stock
$25.30 USD
Steel
Stamped face
White Finish
1/2" spacing
Counter-sunk screw holes
SKU:
170/24x12
Vendor:
TRUaire
Type:
Stamped Return Air Grille
Availability:
In-Stock
$15.40 USD
BRAND: Diversitech
ID: #D100-1S9-1074
Available in 2-4 days
$35.00 USD
White polystyrene 1/2in. open cell grid louvers are beneficial for air return.
SKU:
650-100
Vendor:
Diversitech
Type:
Air Return Diffusers
Availability:
In-Stock
$35.00 USD
BRAND: Diversitech
ID: #D100-1S9-1073
Available in 2-4 days
$21.00 USD
White polystyrene 1/2in. open cell grid louvers are beneficial for air return.
SKU:
650-300
Vendor:
Diversitech
Type:
Air Return Diffusers
Availability:
In-Stock
$21.00 USD
BRAND: Diversitech
ID: #D100-1S9-1071
$35.00 USD
Galvanized duct strap in a convenient cardboard dispenser is not only easy to drill or nail, but also solid strapping.
SKU:
710-002
Vendor:
Diversitech
Type:
Duct Strap
Availability:
In-Stock
$35.00 USD
BRAND: Diversitech
ID: #D100-1S9-1071
Available in 2-4 days
Sold Out
Galvanized duct strap in a convenient cardboard dispenser is not only easy to drill or nail, but also solid strapping.
SKU:
710-003
Vendor:
Diversitech
Type:
Duct Strap
Availability:
Out-Stock
Sold Out
BRAND: Diversitech
ID: #D100-1S9-1070
Available in 2-4 days
$17.00 USD
High tensile and abrasion resistant polypropylene
1-3/4" x 100'
Chemical resistant and meets UL 2043
SKU:
710-104
Vendor:
Diversitech
Type:
Duct Strap
Availability:
In-Stock
$17.00 USD
BRAND: Diversitech
ID: #D100-1S9-1069
Available in 2-4 days
$54.00 USD
Galvanized duct strap in a convenient cardboard dispenser is not only easy to drill or nail, but also solid strapping.
SKU:
710-004
Vendor:
Diversitech
Type:
Duct Strap
Availability:
In-Stock
$54.00 USD
BRAND: Diversitech
ID: #D100-1S9-1068
Available in 2-4 days
$15.00 USD
Each kit has 100 slotted screws, 100 plastic anchors, one carbide tipped masonry drill bit For use with brick, concrete, masonry, stucco, plaster or drywall...
SKU:
7101CX
Vendor:
Diversitech
Type:
Plastic Anchoring Kit
Availability:
In-Stock
$15.00 USD
BRAND: Diversitech
ID: #D100-1S9-1067
Available in 2-4 days
$35.00 USD
Galvanized
1" x 100'
26 gauge
SKU:
710-001
Vendor:
Diversitech
Type:
Duct Strap
Availability:
In-Stock
$35.00 USD
18 gauge galvanized on reel
830
SKU:
710-185G
Vendor:
Diversitech
Type:
Hanging Wire
Availability:
In-Stock
$39.00 USD
Each kit has 100 slotted screws, 100 plastic anchors, one carbide tipped masonry drill bit For use with brick, concrete, masonry, stucco, plaster or drywall...
SKU:
7101HCX
Vendor:
Diversitech
Type:
Plastic Anchoring Kit
Availability:
In-Stock
$17.00 USD
Each kit has 100 slotted screws, 100 plastic anchors, one carbide tipped masonry drill bit For use with brick, concrete, masonry, stucco, plaster or drywall...
SKU:
7102CX
Vendor:
Diversitech
Type:
Plastic Anchoring Kit
Availability:
In-Stock
$17.00 USD
3/4" wide x .050" thick x 100'
Flexible, non-conductive
Load tested to 120 lbs.
SKU:
710P100
Vendor:
Diversitech
Type:
Plastic Hanger Duct Strap
Availability:
In-Stock
$25.00 USD
Each kit has 100 slotted screws, 100 plastic anchors, one carbide tipped masonry drill bit For use with brick, concrete, masonry, stucco, plaster or drywall...
SKU:
7102HCX
Vendor:
Diversitech
Type:
Plastic Anchoring Kit
Availability:
Out-Stock
Sold Out
BRAND: Diversitech
ID: #D100-1S9-1061
$13.00 USD
High tensile and abrasion resistant polypropylene
1-3/4" x 100'
Chemical resistant
SKU:
710-100
Vendor:
Diversitech
Type:
Duct Strap
Availability:
In-Stock
$13.00 USD
Used for supporting condensing units, Hef-T-Brackets (Type 3), just like Hef-T-Brackets (Type 2), feature a cross bar that is attached to a wall, and two...
SKU:
230-B3L
Vendor:
Diversitech
Type:
Wall Bracket
Availability:
Out-Stock
Sold Out
BRAND: Diversitech
ID: #D100-1S9-1001
Available in 2-4 days
$127.00 USD
Used for supporting condensing units, Hef-T-Brackets (Type 2) feature a cross bar that is attached to a wall, and two L-shaped brackets that are hooked...
SKU:
230-B2L
Vendor:
Diversitech
Type:
Wall Bracket
Availability:
In-Stock
$127.00 USD
BRAND: Diversitech
ID: #D100-1S9-1002
Available in 2-4 days
$119.00 USD
Used for supporting condensing units, Hef-T-Brackets (Type 2) feature a cross bar that is attached to a wall, and two L-shaped brackets that are hooked...
SKU:
230-B2M
Vendor:
Diversitech
Type:
Wall Bracket
Availability:
In-Stock
$119.00 USD
BRAND: Diversitech
ID: #D100-1S9-1003
Available in 2-4 days
$356.00 USD
Provides a safe, stable platform Keeps it elevated above lawn mowers, weed whackers, pets, snow, and flooding Allows for easy access during installation, service, and...
SKU:
QSMS1201
Vendor:
Diversitech
Type:
Wall Bracket
Availability:
In-Stock
$356.00 USD
BRAND: Diversitech
ID: #D100-1S9-1004
Available in 2-4 days
Sold Out
Provides a safe, stable platform Keeps it elevated above lawn mowers, weed whackers, pets, snow, and flooding Allows for easy access during installation, service, and...
SKU:
TDC-8
Vendor:
Diversitech
Type:
Wall Bracket
Availability:
Out-Stock
Sold Out
BRAND: Diversitech
ID: #D100-1S9-1005
Available in 2-4 days
$356.00 USD
Provides a safe, stable platform Keeps it elevated above lawn mowers, weed whackers, pets, snow, and flooding Allows for easy access during installation, service, and...
SKU:
QSMS1200
Vendor:
Diversitech
Type:
Wall Bracket
Availability:
In-Stock
$356.00 USD
BRAND: Diversitech
ID: #D100-1S9-1006
Available in 2-4 days
$231.00 USD
Light-weight aluminum construction
Strong enough for large cassettes
Adjustable in all directions after installation
Hardware included
SKU:
QSCH2000
Vendor:
Diversitech
Type:
Wall Bracket
Availability:
In-Stock
$231.00 USD
BRAND: Diversitech
ID: #D100-1S9-1007
Available in 2-4 days
Sold Out
Provides a safe, stable platform Keeps it elevated above lawn mowers, weed whackers, pets, snow, and flooding Allows for easy access during installation, service, and...
SKU:
QSMS1202
Vendor:
Diversitech
Type:
Wall Bracket
Availability:
Out-Stock
Sold Out
BRAND: Diversitech
ID: #D100-1S9-1008
Available in 2-4 days
$203.00 USD
Light-weight aluminum construction
Strong enough for large cassettes
Adjustable in all directions after installation
Hardware included
SKU:
QSCH1000
Vendor:
Diversitech
Type:
Wall Bracket
Availability:
In-Stock
$203.00 USD
BRAND: Diversitech
ID: #D100-1S9-1009
Available in 2-4 days
$331.00 USD
Design allows for mounting units up and out or down and out Anti-vibration Isolation (4 points on 1000 & 3000, 9 on 2000 & 4000)...
SKU:
QSWB2000SS
Vendor:
Diversitech
Type:
Wall Bracket
Availability:
In-Stock
$331.00 USD
BRAND: Diversitech
ID: #D100-1S9-1010
Available in 2-4 days
$15.00 USD
Easily secures condensing units to pads or stands
Galvanized steel
SKU:
TDC-4
Vendor:
Diversitech
Type:
Wall Bracket
Availability:
In-Stock
$15.00 USD
BRAND: Diversitech
ID: #D100-1S9-1011
Available in 2-4 days
Sold Out
Easily secures condensing units to pads or stands
Galvanized steel
SKU:
TDC-6
Vendor:
Diversitech
Type:
Wall Bracket
Availability:
Out-Stock
Sold Out
BRAND: Diversitech
ID: #D100-1S9-1012
Available in 2-4 days
Sold Out
Easily secures condensing units to pads or stands
Galvanized steel
SKU:
TDC-12
Vendor:
Diversitech
Type:
Wall Bracket
Availability:
Out-Stock
Sold Out
BRAND: Diversitech
ID: #D100-1S9-1013
Available in 2-4 days
$36.00 USD
Easily secures condensing units to pads or stands
Galvanized steel
SKU:
TDC-10
Vendor:
Diversitech
Type:
Wall Bracket
Availability:
In-Stock
$36.00 USD