WebRelay-10/ WebRelay-10 Plus, Industrial Grade Remote Relay Control

WebRelay-10™ is a robust, industrial relay board with Ethernet communications. It provides remote relay control through its ten large 15A relays.
The relays can be individually controlled using a standard web browser or by sending commands from a custom control application. It is self-contained with a built-in web server, and requires no external software, additional network modules, or computers.
WebRelay-10 is designed for industrial applications and can be DIN-Rail mounted inside a control cabinet. Tab connectors (1/4 inch) are used for power and relay contact connection.

WebRelay-10 Plus™
The full featured WebRelay-10 Plus has all the features found on WebRelay-10, plus much more. Additional features include an event scheduler, customizable email alerts, two discrete inputs, device logging, and remote temperature monitoring.

Features:

WebRelay-10

• Ten independent 15A Relays - SPDT (Form C).
• Built-in web server for browser-based setup and control.
• No special software or device drivers required.
• XML status and control page make communications with custom computer applications simple.
• Can operate as a Modbus/TCP slave.
• On/Off and Pulse modes.
• DIN-Rail mountable.
• LEDs indicate the current relay state.
• 1/4-inch tab-connectors.
• Power Supply: 9-28 VDC.
• UL/CUL listed relays (E197852).

WebRelay-10 Plus Additional Features

• Event scheduler with yearly calendar. Schedule up to 100 events.
• Customizable email alerts.
• Up to 8 temperature sensors can be added for environmental monitoring (one temperature sensor included).
• Dry-contact sensors or switches can be connected for local control of relays or for monitoring external devices.
• Inputs can be used as counters.
• Logging; log relay changes, events, Modbus requests, high/low temperatures, input changes, network traffic, and more.
• Real-time clock, can automatically adjust for daylight savings time, sync with NTP server.
• System log provides detailed diagnostic information.
• Simple scripts can be written in BASIC for advanced functionality.
• Configure manually or with DHCP.

WebRelay-10 Part Numbers:

       1. X-WR-10R12-I    
OUTPUTS: 10 Relays (15A 277VAC, 30VDC)
INPUTS: N/A
POWER SUPPLY: 9-28VDC

       2. X-WR-10R12-IP    
OUTPUTS: 10 Relays (15A 277VAC, 30VDC)
INPUTS: 

• Digital: 2 (0-5VDC)
• Temp: 8 (-67°F to 257°F (-55°C to +125°C))

POWER SUPPLY: 9-28VDC

Electromagnetic Compliance:

• IEC CISPR 22, CISPR 24
• FCC 47CFR15 (Class B)
• EN55024 ITE Immunity (2010)
• EN55022 Emissions (2010)

Product Safety Compliance:

• IEC 61010-1

Connectors:

• Accessory Connector: 5-Position, 3.81mm terminal spacing, Removable. For 16-28 AWG wire.
• Network: 8-pin RJ-45