HVAC
Plumbing
ELECTRICAL
Tools & Test Instruments
Categories
Price
Type List
- 4-Tool Cordless Combo Kit
- Absorbent Utility Pads
- Accelerator Rapid Evacuation Kit
- Access Quick Coupler
- Acme Adapter
- Adjustable Wrench
- Adjustable Wrench Set
- Air-Acetylene Hose
- Airflow Balancing Meter
- Aluminum Handled Combination Snips
- Aluminum Snips
- Andy Aluminum Handled Snips
- Assisted Crimper
- Automotive Refrigerant Side Can Tap
- Aviation Mini-Snip
- Aviation Snip
- Aviation Snips
- Aviation Snips with Green Grip
- Ball Valve
- Ball Valve Set
- Battery
- Battery Pack
- Bearing for Hole Cutter
- BiMetal Metal Saw Blades
- Bit Extension
- Bit Pouch
- Bit Set
- Black Fine Point Marker
- Blade for Sure Grip Tube Slicer
- Bulldog Snips
- Button Head Rivets
- Carbide Tipped Masonry Bit
- Channel Shear
- Charging Hose
- Charging Hose Set
- Charging Hoses
- Chuck Key
- Classic Aluminum Handled Combination Snips
- Clutch Driven Flaring Tool
- CO2 Cartridges
- CO2 Refill Cartridges
- CO2 Regulator
- CO2 to Nitrogen Adapter
- Coil Cleaning Machine
- Combination Cutting Snip
- Combination Pliers
- Combination Snip
- Compact Battery Pack
- Compact Organizer
- Compact Ultra Light Vinyl-Cutting Combination Snips
- Compound Leverage Stone Coated Steel Roofing Cutter
- Connext Kit with Ratcheting Handle
- Connext Magnetic Hex Driver
- Cooler
- Cordless Drill/Driver
- Cordless Hammer Drill/Driver
- Cordless Installation Drill/Driver Kit
- Cordless Lithium-Ion Copper Tubing Cutter Kit
- Cordless Screwdriver Kit
- Core Removal Tool
- Coupling Fitting
- Crate
- Crimper
- Curved Jaw Locking Pliers
- Cutter Bit
- Cutting Wheel for Tube Cutters
- Digital Torque Wrench
- Disconnect Switch
- Double Cutting TurboShear
- Double Gripping Power Grip Caulking Gun
- Double-Cut TurboShear Replacement Blade
- Drain Cone
- Drain Dawg
- Drain Gun
- Drain Kat
- Drain Line Flush Device
- Drill Bit
- Drill Bit Set
- Drill Clamp
- Drill Set
- Drip Edge Folding Tool
- Drive Bit
- Drive Shaft
- Dual Temperature Heat Gun
- Dual-Sided Reversible Hex Driver
- Duct Board Washer
- Duct Knife
- Duct Shear
- Duct Stretcher
- Duct Stretcher Replacement Wheel Kit
- Dust Masks
- EasyHood™ Airflow Capture Hood Kit
- Electrical Cutter/Stripper/Crimper Plier
- Electrical Wire Cutter/Stripper
- Equipment Tracker
- Eurocap Tamper Proof Cap
- Extended Capacity Battery Pack
- Extension Pole
- Face Mask
- Fiber Cement Angle Cutter
- Fiber Cement Mixed Gauge Set
- Fiber Cement Siding Facing Gauge
- Fiber Cement Siding Guillotine Shear
- Fiber Cement Siding Overlap Gauge
- Fin Comb
- Flaring Kit
- Flex Mini Split Adapter
- Flexible Duct Support
- Flip Utility Knife
- Foam Pig
- Foam Pig Kit
- Foamboard Staples
- Folding Jab Saw
- Folding Tool
- Folding Utility Knife
- Gas Test Gauge
- Gauge Boot
- Grinding Wheel
- Gutter Outlet Tool Frame
- Hacksaw Frame
- Hand Notcher
- Hand Seamer
- Hanging Strap
- Head Rivets
- Heavy Duty Replacement Blades
- Heavy Duty Trim Nail Punch
- Heavy-Duty Corded Swivel Head Shear
- Heavy-Duty Hammerdrill
- Hex Cordless Impact Driver
- Hex Cordless Impact Driver Kit
- Hex Driver
- Hex Driver®
- Hex Impact Driver Combo
- Hex Key Ratchet Wrench Insert
- Hex Key Set
- Hex Quick Change Adapter
- Hidden Nail Cutter
- High Carbon Steel Saw Blades for Wood
- High Side Gauge
- Hole Cutter
- Hole Saw
- Hose Depressor
- Hose Gasket
- HVAC Deluxe Starter Kit
- HVAC Starter Tool Kit
- Impact Magnetic Nut Driver
- Inspection Camera
- Inspection Camera Kit
- Internal Pipe Wrench
- Jobsite Fan
- Kobra Charging Hose
- Large Hole Saw Arbor
- Large Ratchet Tube Cutter
- Large Tool Box
- Lashing Strap
- Left Cut Vertica Aviation Snips
- Leg Kit for Portable Mini Brake
- Lightweight Aluminum Handled Snips
- Line Set Cleaner Tool Kit
- Liquid Charging Adapter
- Lithium-Ion 1/4" Hex Cordless Impact Driver
- Lithium-Ion Cordless Recip Saw Kit
- Lithium-Ion Work Light
- Lock Punch
- Locking Tradesman Knife
- Long Magnetic Hex Chuck Driver
- Low Side Gauge
- Low-Pressure
- Low-Profile Compact Organizer
- Low-Profile Organizer
- Machine Switch
- Magnetic Bit Holder
- Magnetic Gutter Screw Guide
- Magnetic Manifold Gauge Holder
- Magnetic Tape Measure
- Magnetic Umbrella
- MagneticHand Driver
- Manifold
- MAX Jaw
- MAX Jaw Kit
- MC-B Tank Adapter
- Metal Scribe
- Milled Variable/Standard Reciprocating BiMetal Wood Saw Blade
- Mini Brake
- Mini-Size Trim Nail Punch
- Mounting Flood Light
- Multi Key
- Multi-Purpose Fencing Pliers
- Needle and Gasket
- Nitrile Gloves
- Nitrogen Purge Tool
- Nut Driver
- Nylon Ties
- O-Ring Seal
- O-Rings
- Offset Crimper
- Organizer
- Paint Marker
- PEX to Wire Tool
- PEX Tubing Uncoiler In Case
- Phillips Chuck Driver Insert Bit
- Phillips Chuck Long Driver Insert Bit
- Phillips Insert Bit
- Piece Screw Extractor Kit
- Pilot Bit
- Pin Actuator
- Pin Set
- Pipe and Duct Holder
- Plastic Tube Slicer
- Pliers
- Plunger Actuator
- Pocket Brake
- Pocket Tool Backpack
- Point Break Away Blades
- Pre-Assembled Damper w/ Wing Nuts
- Press Tool
- PRO-SET® Metric Torque Wrench Set
- PRO-SET® SAE Torque Wrench Set
- Punch & Die Set
- Push Switch
- Quick Action Carbide Tipped Hole Saw
- Quick Change Pilot Drill
- Quick Release Arbor with Pilot Drill
- Quick-Change Magnetic Nut Driver
- R134A Manual Automotive Coupler
- R134A Snap-N-Seal Automotive Coupler
- Rasping Jab Saw
- Ratchet Strap
- Ratchet Wrench Insert
- Ratcheting Driver
- Recip Saw
- Reciprocating Blade
- Reciprocating Saw
- RedLine Ceiling Grid Punch
- RedLine Downspout Crimper
- RedLine Fiber Cement Siding Snip
- RedLine Hand Seamer
- RedLine Hole Punch
- RedLine J-Channel Cutter
- RedLine Nail Hole Slot Punch
- RedLine Punch Lock Stud Crimper
- RedLine Snap Lock Punch
- Refrigeration Ratchet Wrench
- Replacement Blade
- Replacement Blade & 2 Spacers for SRC24A Channel Shear
- Replacement Blade for Stone Coated Steel Roofing Cutter
- Replacement Blade Set
- Replacement Blades
- Replacement Blades for MC14A Combination Snips
- Replacement Blades for Tin Snips
- Replacement Cutter Bit for HC1 & HC2
- Replacement Drill
- Replacement Gasket
- Replacement Gauge
- Replacement Lens
- Replacement Shoe for Hole Cutte
- Replacement Spring
- Replacement Thrust Bearing for Hole Cutter
- Right Angle Drill Attachment
- Right Cut Vertical Aviation Snips
- Ring Jaw
- Rolling Tool Box
- Safety Drop Cloth
- Scratch Awl
- Screwdriver
- Screwdriver Key
- Secure Seal
- Secure Seal Fitting
- Secure Seal Fitting Straight
- Setting Hammer
- Shaft Blaster
- Shaft Blaster Discs
- Sheet Metal Hammer
- Sheet Metal Screws
- Shockwave Adapter
- Shockwave Hex Nut Driver Bit
- Shockwave Phillips Bit
- Shoe Covers
- Short Magnetic Hex Chuck Driver
- Shut-Off Stem
- Side Can Tap
- Slide Valve Core Removal Tool
- SmartAir™ Meter
- SmartClips for SM1 Stapler
- SmartTool Stapler
- Snap Lock Punch
- Spring for Sheet Metal Tools
- Square Combination
- Square Head Chuck Driver Insert Bit
- Standard Rectangular Hole Gutter Outlet Die
- Staple Gun
- Staples
- Starter Tool Kit
- Station Edge Roller
- Steel Cutting Circular Saw Blade
- Straight Aluminum Snips
- Straight Double Cut Aviation Snips
- Straight Edge Ruler
- Straight Fitting
- Straight Jaw Locking Pliers
- Straight-Jaw Plier
- Stretch Straps
- Style Hole Gutter Outlet Die
- Super Heat Calculation Tool
- Supercomb
- Swaging Kit
- T-Hex Key
- Tamper Proof Cap
- Tank Tote
- Tape Measure
- Tapered Broach
- TempSmart Data Logger
- TempSmart Wireless Data Logger Kit
- Tensioning Tool
- Tensioning Tools with Manual Cut Off Tie Tool
- Termination Fitting
- Test Instrument
- Tinner's Circumference Ruler
- Tool
- Tool Box
- Tool Case with Foam Insert
- Torch Shield
- Trammel Point
- Trim Nail Punch with Retaining Clip
- Truck Rope
- Tube Cutters
- TurboCrimper®
- TurboShear
- TurboShear - Corrugated Metal Attachment
- TurboShear Heavy-Duty
- TurboShear Slate - Cutting Drill Attachment
- Turn Anti-Blowback Adaptor
- Universal Flex Duct Knife Sheath
- Universal Screwdriver Key
- Utility Blades 5PK
- Utility Knife
- Utility Lift
- Vacuum Gauge
- Vacuum Pump
- Vacuum Pump Oil
- Valve Core Removal Tool
- VaporVue Charging Device
- Velocity Rapid Evacuation Kit
- Vent Saw Replacement Drill Bit
- Viega MegaPress Fittings
- Vinyl Fence Rail Notcher
- Wireless Airflow Balancing and Environmental Meter
- Wireless Dual Input Manometer
- Wireless Dual Input Manometer Kit
- Wireless P/T Gauge
- Wiring Harness Connector
- Wood Staple
- Wood Vent Saw
- Wood/Foamboard Stapler
Tools
Items 1 to 100 of 938 total
Uses a pressurized source to launch a foam puck into the line set to wipe the pipe clean of contaminants and remaining refrigerants Simply connect...
SKU:
HLP099
Vendor:
hilmor
Type:
Foam Pig Kit
Availability:
Out-Stock
$19.00 USD
Uses a pressurized source to launch a foam puck into the line set to wipe the pipe clean of contaminants and remaining refrigerants Simply connect...
SKU:
HLP038
Vendor:
hilmor
Type:
Foam Pig
Availability:
Out-Stock
$24.00 USD
MASTERJ's 3-30 NAO will accommodate up to (3) 30lb. cylinders, (1) Nitrogen or B-Tank, (1) Acetylene & (1) Oxygen tank.
SKU:
TH330NAO
Vendor:
MASTERJ
Type:
Availability:
In-Stock
$265.00 USD
MASTERJ's 1-50, 2-30 NAO will accommodate up to (1) 50lb. cylinder, (3) 30lb. cylinders, (1) Nitrogen or B-Tank, (1) Acetylene & (1) Oxygen tank.
SKU:
TH150230NAO
Vendor:
MASTERJ
Type:
Availability:
In-Stock
$275.00 USD
BRAND: JB
ID: #JB100-1S9-0062
Available in 2-4 days
$123.20 USD
Designed to remove and replace valve cores without losing system charge Convenient slide valve side port to accommodate a vacuum gauge In-line actuated handle for...
SKU:
A32525SV
Vendor:
JB
Type:
Slide Valve Core Removal Tool
Availability:
In-Stock
$123.20 USD
BRAND: Yellow Jacket
ID: #TYJ100-1S9-1006
Available in 2-4 days
$12.84 USD
For use with Yellow Jacket gauges
SKU:
49100
Vendor:
Yellow Jacket
Type:
Tool
Availability:
In-Stock
$12.84 USD
MASTERJ's TH330 is an ideal refrigerant rack for standard size vans. The rack can be mounted both vertical and horizontal.TH330 will accommodate up to (3)...
SKU:
TH330
Vendor:
MASTERJ
Type:
Availability:
In-Stock
$260.00 USD
BRAND: Malco
ID: #E200-2SH9-0171
$77.50 USD
Replacement Blade & 2 Spacers for SRC24A Channel Shear
SKU:
10627
Vendor:
Malco
Type:
Replacement Blade & 2 Spacers for SRC24A Channel Shear
Availability:
In-Stock
$77.50 USD
BRAND: Milwaukee
ID: #MIL100-1S9-0118
Available in 2-4 Days
$1,327.02 USD
Perform visual inspections in hard-to-reach areas 270 degree camera head motion 3.5" wireless LCD screen LED for illuminating dark spaces 3-foot cable length Includes M12...
SKU:
2317-21
Vendor:
Milwaukee
Type:
Inspection Camera
Availability:
In-Stock
$1,327.02 USD
BRAND: Milwaukee
ID: #MIL100-1S9-0106
Available in 2-4 Days
$52.02 USD
Part of the PACKOUT™ modular storage system 5 removable and mountable bins No-travel bins seal prevent small part migration between bins Constructed with impact resistant...
SKU:
48-22-8435
Vendor:
Milwaukee
Type:
Compact Organizer
Availability:
In-Stock
$52.02 USD
Safety turned and chamfered heads
Exclusive bell-chamfer to meet recognized aluminum tube soldering practice
Brite-plated, heat treated hex steel
SKU:
T21005
Vendor:
JB
Type:
Tube Cutters
Availability:
Out-Stock
Sold Out
Scribes lines on sheet metal, plastic and a variety of other materials 1/4" x 4" blade is tapered and can be resharpened many times Handle...
SKU:
A20
Vendor:
Malco
Type:
Scratch Awl
Availability:
Out-Stock
Sold Out
Crimps 24 to 30 gauge galvanized round duct, including spiral duct 5 times faster than hand crimpers Requires 12V (minimum) cordless or 7A (maximum) corded...
SKU:
C5A2
Vendor:
Malco
Type:
TurboCrimper®
Availability:
In-Stock
$134.34 USD
SPDT, screw terminals, 1" H, 12.3 oz. operating force Replaces Micro #BA-2R-A2, Arrow Hart #HD3-Z2 and Unimax #2HL-5 Used on conveyors, packaging machinery, security alarms,...
SKU:
E47CMS01-JS
Vendor:
Eaton
Type:
Pin Actuator
Availability:
Out-Stock
Sold Out
For 1/4", 5/16" and 3/8" tubing
Stationary hook holds tubing securely while bending
Calibrated markings for bends up to 180°
SKU:
60390
Vendor:
Yellow Jacket
Type:
Tool
Availability:
In-Stock
$65.27 USD
PLUS II™ environmentally responsible, permeation resistant hose Compatible with current CFC, HCFC and HFC refrigerants and oils Rated for 800 PSI working pressure, 4,000 PSI...
SKU:
60440
Vendor:
Yellow Jacket
Type:
Tool
Availability:
In-Stock
$234.33 USD
Combination lead double thread design Single starting thread machined down to very tip of screw point Instantly penetrates and engages in heavy gauge sheet metal...
SKU:
PO8X2ZWT
Vendor:
Malco
Type:
Sheet Metal Screws
Availability:
In-Stock
$43.52 USD
Reversible 7 mm and 8 mm hex sizes
7 mm hex allows access in tight areas
Easy-clean magnet
One-piece driver strength and durability
SKU:
MSHXLCM3
Vendor:
Malco
Type:
Dual-Sided Reversible Hex Driver
Availability:
In-Stock
$28.60 USD
Reversible 7 mm and 8 mm hex sizes
7 mm hex allows access in tight areas
Easy-clean magnet
One-piece driver strength and durability
SKU:
MSHMLCM3
Vendor:
Malco
Type:
Dual-Sided Reversible Hex Driver
Availability:
In-Stock
$19.35 USD
Reversible 7 mm and 8 mm hex sizes
7 mm hex allows access in tight areas
Easy-clean magnet
One-piece driver strength and durability
SKU:
MSHCM3
Vendor:
Malco
Type:
Dual-Sided Reversible Hex Driver
Availability:
In-Stock
$49.00 USD
Hardened alloy steel blades offer maximum cutting life Latch is accessible from left, right or top Fast adjusting, long life pivot bolt Easy replacement of...
SKU:
M2007
Vendor:
Malco
Type:
Aviation Snips
Availability:
In-Stock
$57.80 USD
For straight shearing, mild curve cuts and multiple layers of material
Strong lightweight aluminum frame
Long life inlaid steel blades
SKU:
M14A
Vendor:
Malco
Type:
Straight Aluminum Snips
Availability:
In-Stock
$55.70 USD
For straight shearing, mild curve cuts and multiple layers of material
Strong lightweight aluminum frame
Long life inlaid steel blades
SKU:
M12A
Vendor:
Malco
Type:
Straight Aluminum Snips
Availability:
In-Stock
$50.30 USD
Extra sharp, precision broached teeth for superior gripping power Jaws forged from premium grade US steel for increased strength and long-life Large adjustment knob and...
SKU:
LP7WC
Vendor:
Malco
Type:
Curved Jaw Locking Pliers
Availability:
In-Stock
$55.60 USD
Extra sharp, precision broached teeth for superior gripping power Jaws forged from premium grade US steel for increased strength and long-life Large adjustment knob and...
SKU:
LP7R
Vendor:
Malco
Type:
Straight Jaw Locking Pliers
Availability:
In-Stock
$55.60 USD
Extra sharp, precision broached teeth for superior gripping power Jaws forged from premium grade US steel for increased strength and long-life Large adjustment knob and...
SKU:
LP10WC
Vendor:
Malco
Type:
Curved Jaw Locking Pliers
Availability:
In-Stock
$57.40 USD
Extra sharp, precision broached teeth for superior gripping power Jaws forged from premium grade US steel for increased strength and long-life Large adjustment knob and...
SKU:
LP10R
Vendor:
Malco
Type:
Straight Jaw Locking Pliers
Availability:
In-Stock
$57.40 USD
Combination lead double thread design Single starting thread machined down to very tip of screw point Instantly penetrates and engages in heavy gauge sheet metal...
SKU:
HW8X3ZWT
Vendor:
Malco
Type:
Sheet Metal Screws
Availability:
In-Stock
$52.50 USD
Combination lead double thread design Single starting thread machined down to very tip of screw point Instantly penetrates and engages in heavy gauge sheet metal...
SKU:
HW8X3/4Z
Vendor:
Malco
Type:
Sheet Metal Screws
Availability:
In-Stock
$424.05 USD
Combination lead double thread design Single starting thread machined down to very tip of screw point Instantly penetrates and engages in heavy gauge sheet metal...
SKU:
HW8X2Z
Vendor:
Malco
Type:
Sheet Metal Screws
Availability:
In-Stock
$216.90 USD
Combination lead double thread design Single starting thread machined down to very tip of screw point Instantly penetrates and engages in heavy gauge sheet metal...
SKU:
HW8X1Z
Vendor:
Malco
Type:
Sheet Metal Screws
Availability:
In-Stock
$359.00 USD
Combination lead double thread design Single starting thread machined down to very tip of screw point Instantly penetrates and engages in heavy gauge sheet metal...
SKU:
HW7X1/2Z
Vendor:
Malco
Type:
Sheet Metal Screws
Availability:
In-Stock
$440.30 USD
Combination lead double thread design Single starting thread machined down to very tip of screw point Instantly penetrates and engages in heavy gauge sheet metal...
SKU:
HW10X1/2ZT
Vendor:
Malco
Type:
Sheet Metal Screws
Availability:
In-Stock
$61.00 USD
WARRANTY - Johnstone Supply will administer and promptly process all warranties in accordance with the manufacturer's specific warranty policies and procedures. WHOLESALE ONLY - Identification...
SKU:
CONNEXT2
Vendor:
Malco
Type:
MagneticHand Driver
Availability:
In-Stock
$10.50 USD
BRAND: Malco
ID: #E200-1S9-0382
$11.90 USD
WARRANTY - Johnstone Supply will administer and promptly process all warranties in accordance with the manufacturer's specific warranty policies and procedures. WHOLESALE ONLY - Identification...
SKU:
CONNEXT1
Vendor:
Malco
Type:
MagneticHand Driver
Availability:
In-Stock
$11.90 USD
Drills its own hole and taps a matching thread in less time than it takes to drill a pilot hole for other standard fasteners Produces...
SKU:
BT144T
Vendor:
Malco
Type:
Sheet Metal Screws
Availability:
In-Stock
$66.30 USD
Drills its own hole and taps a matching thread in less time than it takes to drill a pilot hole for other standard fasteners Produces...
SKU:
BT141T
Vendor:
Malco
Type:
Sheet Metal Screws
Availability:
In-Stock
$44.88 USD
BRAND: Malco
ID: #E200-1S9-0378
$382.54 USD
Combination lead double thread design Single starting thread machined down to very tip of screw point Instantly penetrates and engages in heavy gauge sheet metal...
SKU:
HW8X1/2Z
Vendor:
Malco
Type:
Sheet Metal Screws
Availability:
In-Stock
$382.54 USD
Make or remake clean locking tabs in vinyl pickets and rails on the job. Compound leverage produces 7 to 1 mechanical advantage. Ergonomic Redline Handles...
SKU:
VFN2
Vendor:
Malco
Type:
Vinyl Fence Rail Notcher
Availability:
In-Stock
$89.20 USD
Available in 19 sizes to get any number of jobs done fast! Aggressive carbide tipped teeth with deep self-cleaning gullets easily cut thick or layered...
SKU:
HF15
Vendor:
Malco
Type:
Quick Action Carbide Tipped Hole Saw
Availability:
In-Stock
$118.60 USD
BRAND: Malco
ID: #E200-2SH9-0021
$124.20 USD
Malco’s Fiberglass Duct Board Washers help to reinforce sheet metal components to fiberglass duct. Use with #8 screw for fastening components.Features: For use with wire-reinforced...
SKU:
RW732
Vendor:
Malco
Type:
Duct Board Washer
Availability:
In-Stock
$124.20 USD
Easily organize, protect and safely transport your valuable tools-of-the-trade with a job-site-quality, 33-pocket tool backpack. Durable construction offers long service life and features a dense,...
SKU:
TBP33
Vendor:
Malco
Type:
Pocket Tool Backpack
Availability:
In-Stock
$127.40 USD
Power drive 1/4-inch hex shank fits any electric power drill or 1/4-inch power drive holder. Accepts 1/4-inch hex shank insert bits.
SKU:
MBH14
Vendor:
Malco
Type:
Magnetic Bit Holder
Availability:
In-Stock
$13.00 USD
Features: For use with Type "A" hex head screws and Malco's Zip-In screws Hex opening of a 5/16 inch Magnetic nose keeps fastener in place...
SKU:
HHD2S
Vendor:
Malco
Type:
Connext Magnetic Hex Driver
Availability:
In-Stock
$13.10 USD
BRAND: Malco
ID: #E200-2SH9-0026
$13.20 USD
Malco precision fit and hardened Magnetic Hex Chuck Drivers, with 1/4-inch power insert shanks, meet on-the-job demands for performance and service life whether installed on...
SKU:
MSH38P
Vendor:
Malco
Type:
Short Magnetic Hex Chuck Driver
Availability:
In-Stock
$13.20 USD
Make your drill a double-cut metal shear. Now you can get double-cut performance in a Versatile Malco TurboShear. The versatile model TSMD TurboShear Drill Attachment...
SKU:
TSMD
Vendor:
Malco
Type:
Double Cutting TurboShear
Availability:
In-Stock
$129.20 USD
All Malco Gutter Outlet Punch and Dies make clean, accurate hole cuts in .032” (0.81 mm) aluminum gutter. Ample throat clearance allows these lightweight outlet...
SKU:
GOT
Vendor:
Malco
Type:
Gutter Outlet Tool Frame
Availability:
In-Stock
$144.00 USD
BRAND: Malco
ID: #E200-2SH9-0029
$145.80 USD
1/4" (6.4 mm) bearings allow bearing holes to be made in round duct with the use of a scratch awl. Squeeze pipe so that it...
SKU:
D6AST
Vendor:
Malco
Type:
Pre-Assembled Damper w/ Wing Nuts
Availability:
In-Stock
$145.80 USD
POWER-FIT™ Performance Hand Grips naturally distribute pressure evenly across your hand resulting in a more natural feel and less fatigue. Ergonomic hand guards allow users...
SKU:
AV3
Vendor:
Malco
Type:
Aviation Snips
Availability:
In-Stock
$14.70 USD
Features: For use with Type "A" hex head screws and Malco's Zip-In screws Hex opening of a 1/4 inch Magnetic nose keeps fastener in place...
SKU:
HHD3T
Vendor:
Malco
Type:
Connext Magnetic Hex Driver
Availability:
In-Stock
$14.00 USD
BRAND: Malco
ID: #E200-2SH9-0032
$14.80 USD
A quick change CT, carbide tipped pilot drill with a tight, gripping hex shank.Features: Quick change pilot drill Carbide tipped Overall length is 7-3/4 in....
SKU:
HH5
Vendor:
Malco
Type:
Quick Change Pilot Drill
Availability:
In-Stock
$14.80 USD
BRAND: Malco
ID: #E200-2SH9-0033
$15.00 USD
Description – A Full line selection of Reciprocating Saw Blades FEATURING: SUPER SHARP and TOUGH BiMetal By Malco, used for metal sheet, pipe, profiles under...
SKU:
4MC24
Vendor:
Malco
Type:
BiMetal Metal Saw Blades
Availability:
In-Stock
$15.00 USD
Description – Use Malco Nylon Ties to install flexible duct to take-offs, or secure bundles, up to 15" (38 cm) diameter. Made of 100% nylon,...
SKU:
TY34
Vendor:
Malco
Type:
Nylon Ties
Availability:
In-Stock
$15.20 USD
BRAND: Malco
ID: #E200-2SH9-0035
$15.40 USD
Description – A Full line selection of Reciprocating Saw Blades FEATURING: SUPER SHARP and TOUGH BiMetal By Malco.THEY STACK UP BETTER: For wood with nails,...
SKU:
4KH7
Vendor:
Malco
Type:
High Carbon Steel Saw Blades for Wood
Availability:
In-Stock
$15.40 USD
POWER-FIT™ Performance Hand Grips naturally distribute pressure evenly across your hand resulting in a more natural feel and less fatigue. Ergonomic hand guards allow users...
SKU:
AV2
Vendor:
Malco
Type:
Aviation Snips
Availability:
In-Stock
$15.40 USD
With an overall length of only 7-1/8 inches (181 mm), the AVsMini easily goes to work in tight or awkward spaces where full-size aviation snips...
SKU:
AVM6-EV
Vendor:
Malco
Type:
Aviation Mini-Snip
Availability:
In-Stock
$16.40 USD
BRAND: Malco
ID: #E200-2SH9-0038
$16.40 USD
–
5/16" Ratchet Wrench Insert, 1-5/8" Long (Pack of 2)
SKU:
RRW516P
Vendor:
Malco
Type:
Ratchet Wrench Insert
Availability:
In-Stock
$16.40 USD
BRAND: Malco
ID: #E200-2SH9-0039
$157.70 USD
A unique thread design and quality controlled manufacture spell the Zip-In difference. Zip-In's sophisticated heat treat process allows the screw to taper to a fine,...
SKU:
HW8X3/4ZP
Vendor:
Malco
Type:
Sheet Metal Screws
Availability:
In-Stock
$157.70 USD
BRAND: Malco
ID: #E200-2SH9-0040
$150.80 USD
Available in 19 sizes to get any number of jobs done fast! Aggressive carbide tipped teeth with deep self-cleaning gullets easily cut thick or layered...
SKU:
HF16
Vendor:
Malco
Type:
Quick Action Carbide Tipped Hole Saw
Availability:
In-Stock
$150.80 USD
BRAND: Malco
ID: #E200-2SH9-0041
$16.70 USD
For installing or servicing heating, air conditioning or refrigeration units. Facilitates easy ratcheting action for servicing hard to access valves common in air condition and...
SKU:
RRW3
Vendor:
Malco
Type:
Refrigeration Ratchet Wrench
Availability:
In-Stock
$16.70 USD
BRAND: Malco
ID: #E200-2SH9-00642
$16.80 USD
Style: No. 8 Head Size: 1/4" Length: 3/4" Quantity: 5,000 Package Type: Pail Single starting thread machined down to very tip of screw point. Instantly...
SKU:
HW8X11/2ZT
Vendor:
Malco
Type:
Sheet Metal Screws
Availability:
In-Stock
$16.80 USD
Impact-grade 6-inch Power Drive with 4-1/2" anodized aluminum sleeve provides extra reach without marring gutter Holds and guides 1/4" hex head screws up to 2...
SKU:
GSG6
Vendor:
Malco
Type:
Magnetic Gutter Screw Guide
Availability:
In-Stock
$17.00 USD
Lightweight shear head for easy one-hand control and a telescoping clamp that fits large or small drill housings.Now turn your power drill into a "Fiber...
SKU:
TSF1
Vendor:
Malco
Type:
TurboShear
Availability:
In-Stock
$173.50 USD
Maneuverable compact length.
Sharply defined cut.
Comfortably fits any size hand.
Spring-actuated, handles will not collapse.
Self-opening latch will not accidentally catch or close.
SKU:
AVM7-EV
Vendor:
Malco
Type:
Aviation Mini-Snip
Availability:
In-Stock
$18.10 USD
The Malco 48Ar is a 48" Aluminum Rule. This 48" aluminum straight-edge ruler is desined with a .125 thickness extruded aluminum construction, and large, clear,...
SKU:
48A
Vendor:
Malco
Type:
Straight Edge Ruler
Availability:
In-Stock
$18.60 USD
BRAND: Malco
ID: #E200-2SH9-0047
$18.70 USD
Head Size: 1/4" Length: 1" Number: 8 Quantity: 500 Package Type: Tub Undercut-indented hex washer slotted head Bright Zinc Plated Burr Fee Full 1/4" (no...
SKU:
HW8X1ZT
Vendor:
Malco
Type:
Sheet Metal Screws
Availability:
In-Stock
$18.70 USD
Machined head has self aligning zinc drawbolt for easy blade installation Satin finish steel blades are precision stamped in eighths and sixteenths on each side...
SKU:
SCS12
Vendor:
Malco
Type:
Square Combination
Availability:
In-Stock
$19.40 USD
BRAND: Malco
ID: #E200-2SH9-0049
$19.50 USD
Head Size: 1/4" Length: 2" Number: 8 Quantity: 250 Package Type: Tub Single starting thread machined down to very tip of screw point Instantly penetrates...
SKU:
HW8X2ZT
Vendor:
Malco
Type:
Sheet Metal Screws
Availability:
In-Stock
$19.50 USD
BRAND: Malco
ID: #E200-2SH9-0050
$190.00 USD
Lightweight shear head for easy one-hand control.Telescoping Clamp fits large or small drill housing.Make your power drill a powerful slate-cutting shear! The Malco Turboshear Model...
SKU:
TSNS1
Vendor:
Malco
Type:
TurboShear Slate - Cutting Drill Attachment
Availability:
In-Stock
$190.00 USD
Lightweight shear head for easy one-hand control.Telescoping Clamp fits large or small drill housing.Cuts 1/2" (13 mm) BackerboardFast straight cuts and arcs with less dust....
SKU:
TSF2
Vendor:
Malco
Type:
TurboShear
Availability:
In-Stock
$192.00 USD
Availability:
In-Stock
$2.50 USD
SKU:
M14NRB
Vendor:
Malco
Type:
Replacement Blades for Tin Snips
Availability:
In-Stock
$19.60 USD
BRAND: Malco
ID: #E200-2SH9-0054
$19.70 USD
M12A for pattern, straight shearing, mild curve cuts, and multiple layers of material. MC12A for combination cuts left or right and straight cuts. Sleek styling,...
SKU:
M14ARB
Vendor:
Malco
Type:
Replacement Blade Set
Availability:
In-Stock
$19.70 USD
BRAND: Malco
ID: #E200-2SH9-0055
$19.80 USD
HSS - high speed steel quick change pilot drill Use with Malco quick connect arbor part number HA3 to eject saw plugs with ease Overall...
SKU:
HH4
Vendor:
Malco
Type:
Quick Change Pilot Drill
Availability:
In-Stock
$19.80 USD
Snap lock plastic skirting and siding to finishing trim. Makes tabs in the cut edge of siding panel used as a finishing course at top...
SKU:
SL5
Vendor:
Malco
Type:
Snap Lock Punch
Availability:
In-Stock
$20.00 USD
Trouble FREE tool operation and secure clip connection Easy-loading magazine with 25 clip capacity won't slow you down 12-gauge (2.5 mm) steel clips will not...
SKU:
PT1
Vendor:
Malco
Type:
PEX to Wire Tool
Availability:
In-Stock
$187.50 USD
Produces cuts in ABS, PVC, rubber and fabric reinforced hose up to 1" (25.4 mm) I.D. Rigid, durable nylon handle design provides sufficient leverage when...
SKU:
TC400
Vendor:
Malco
Type:
Plastic Tube Slicer
Availability:
In-Stock
$22.20 USD
Fits 3/8-inch (10 mm) or larger electric power drills Holder accepts 1/4-inch hex shank chuck drivers and bits Chuck drivers and bits can be inserted...
SKU:
HAD1
Vendor:
Malco
Type:
Hex Quick Change Adapter
Availability:
In-Stock
$22.50 USD
BRAND: Malco
ID: #E200-2SH9-0060
$23.50 USD
A Full line selection of Reciprocating Saw Blades FEATURING: SUPER SHARP and TOUGH BiMetal By Malco, used for rough-in, mild contours in wood with nails.THEY...
SKU:
4KH6
Vendor:
Malco
Type:
Milled Variable/Standard Reciprocating BiMetal Wood Saw Blade
Availability:
In-Stock
$23.50 USD
BRAND: Malco
ID: #E200-2SH9-0061
$23.80 USD
Head Size: 1/4" Number: 8 Length: 1-1/2" Color: White Quantity: 250 Package Type: Tub Undercut-indented hex washer slotted head White Painted Burr Fee Full 1/4"...
SKU:
HW8X11/2ZWT
Vendor:
Malco
Type:
Sheet Metal Screws
Availability:
In-Stock
$23.80 USD
Trim Nail Punch with Retaining Clip for easier nailing from any angle or height, Malco offers a Trim Nail Punch with an exclusive, “nail retaining...
SKU:
TNP2R
Vendor:
Malco
Type:
Trim Nail Punch with Retaining Clip
Availability:
In-Stock
$24.20 USD
Heavy Duty Trim Nail Punches drive trim nails into soffit, fascia and other finishing trim without denting or marring material. All-steel nose and aluminum tail...
SKU:
TNP2S
Vendor:
Malco
Type:
Heavy Duty Trim Nail Punch
Availability:
In-Stock
$24.40 USD
Durable, reliable, built rugid
Top quality products that work hard
Enhanced performance for the trade professional
SKU:
HSRD
Vendor:
Malco
Type:
Vent Saw Replacement Drill Bit
Availability:
In-Stock
$24.50 USD
Bolt Capacities: 4-40, 5-40, 6-32 Cutting Capacities: 8-32, 10-32, 10-24 Crimping: 22-10 ga. Stripping: 22-10 ga. O/A Length: 8 1/4" Weight: 8 oz. (227 g.)...
SKU:
WSC8
Vendor:
Malco
Type:
Electrical Cutter/Stripper/Crimper Plier
Availability:
In-Stock
$24.50 USD
No distortion or compression
Straight square cuts
SKU:
FCC4
Vendor:
Malco
Type:
Fiber Cement Siding Guillotine Shear
Availability:
In-Stock
$255.00 USD
BRAND: Malco
ID: #E200-2SH9-0067
$25.50 USD
Length: 1/2" Number: 7 Head Size: 1/4" Quantity: 1,000 Undercut-indented hex washer slotted head Bright Zinc Plated Burr Fee Full 1/4" (no 7) head will...
SKU:
HW7X1/2ZT
Vendor:
Malco
Type:
Sheet Metal Screws
Availability:
In-Stock
$25.50 USD
BRAND: Malco
ID: #E200-2SH9-0068
$22.50 USD
SKU:
MC12ARB
Vendor:
Malco
Type:
Replacement Blade
Availability:
In-Stock
$22.50 USD
BRAND: Malco
ID: #E200-2SH9-0069
$26.20 USD
Undercut-indented hex washer slotted head Bright Zinc Plated Burr Free Full 1/4" (no. 8) head will not strip out of hex driver opening One 1/4"...
SKU:
HW6X3/8ZT
Vendor:
Malco
Type:
Sheet Metal Screws
Availability:
In-Stock
$26.20 USD
SmartClips are installed with the aid of an easy-to-use, top loading, magazine fed SmartTool Stapler. The ergonomic SmartTool attaches SmartClips to the wire grid from...
SKU:
SM2
Vendor:
Malco
Type:
SmartClips for SM1 Stapler
Availability:
In-Stock
$244.40 USD
Replacement Blade for MC14N
SKU:
MC14NRB
Vendor:
Malco
Type:
Replacement Blade
Availability:
In-Stock
$26.60 USD
BRAND: Malco
ID: #E200-2SH9-0072
Sold Out
Head Size: 1/4" Length: 1/2" Number: 8 Quantity: 1,000 Package Type: Tub Single starting thread machined down to very tip of screw point Instantly penetrates...
SKU:
HW8X11/2ZWT
Vendor:
Malco
Type:
Sheet Metal Screws
Availability:
Out-Stock
Sold Out
Easily cut thick or layered building materials including wood, wall tile, fiberglass, plastic, even fiber-cement siding! Eject saw plugs with ease too! These carbide tipped...
SKU:
HF3
Vendor:
Malco
Type:
Quick Action Carbide Tipped Hole Saw
Availability:
In-Stock
$26.70 USD
BRAND: Malco
ID: #E200-2SH9-0074
$27.00 USD
Replacement Blades for 14" Andy (MC14A) Combination Snips
SKU:
MC14ARB
Vendor:
Malco
Type:
Replacement Blades for MC14A Combination Snips
Availability:
In-Stock
$27.00 USD
Using the Facing Gauge while nailing across the width of the plank assures greater accuracy of the desired exposure and guards against sagging.The Malco Overlap...
SKU:
FCMS
Vendor:
Malco
Type:
Fiber Cement Mixed Gauge Set
Availability:
In-Stock
$27.40 USD
For C5A2 TurboCrimper IMPACTThis Replacement Drive Shaft fits the Malco C5A2 power-assisted TurboCrimper IMPACT attachment for use with impact drivers equipped with a 1/4 in....
SKU:
C5A2RD-EV
Vendor:
Malco
Type:
Drive Shaft
Availability:
In-Stock
$28.00 USD
Cuts in tight spaces and overhead
Easy gripping for push or pull motion left cuts
Powerful non-slip cutting leverage
SKU:
AV8
Vendor:
Malco
Type:
Left Cut Vertica Aviation Snips
Availability:
In-Stock
$28.20 USD
Slotted front for easy loading.
Ladder size hang hook.
1/10 gallon capacity.
12:1 thrust ratio.
Net Weight 28 oz. (0.80 kg)
SKU:
CG18
Vendor:
Malco
Type:
Double Gripping Power Grip Caulking Gun
Availability:
In-Stock
$28.40 USD
BRAND: Malco
ID: #E200-2SH9-0079
$29.00 USD
Qty: 500 Screw Size: 8-18x3/4. Head Type: (HW) Hex Washer Not Slotted Driver Size: 1/4" Hex Length of screw: 3/4" Bit-Tip screw #2 Point Material...
SKU:
BT133T
Vendor:
Malco
Type:
Sheet Metal Screws
Availability:
In-Stock
$29.00 USD
IMPROVED MAX2000 SNIPS FIT ANY HAND WITHOUT SACRIFICING CUT. Malco Max2000 Aviation Snips now feature all-new, molded thermoplastic grips. These easy-to-spot, solid color coded grips...
SKU:
M2002
Vendor:
Malco
Type:
Aviation Snips with Green Grip
Availability:
In-Stock
$29.30 USD
USE MALCO "DUAL-BARBED" STAPLES FOR SUPERIOR HOLDING POWER! Specify Malco No. FBSN1, 1-1/2-in. Staples for 1-in. foamboard. Specify Malco No. FBSN2, 2-1/2-in. Staples for 2-in....
SKU:
FBSN
Vendor:
Malco
Type:
Wood/Foamboard Stapler
Availability:
In-Stock
$294.00 USD
Discover the Ultimate Tools Collection for Every Project
Welcome to our premier collection of tools designed to meet all your project needs. Our diverse range includes top-quality hand tools, power tools, and specialty equipment, each selected for durability and performance.
Hand Tools
Explore our selection of precision screwdrivers, hammers, wrenches, and pliers. Perfect for any DIY enthusiast or professional, these tools ensure accuracy and reliability in every task.
Power Tools
Our power tools range from cordless drills and saws to high-powered sanders and grinders. Engineered for efficiency, these tools make even the toughest jobs easier and faster.
Specialty Tools
For unique projects, our specialty tools provide the precise solutions you need. From laser levels to multi-tools, each item in this category is crafted to help you achieve perfect results.
Why Choose Our Tools?
- Quality Assurance: Each tool undergoes rigorous testing to ensure superior quality.
- Affordability: Competitive pricing without compromising on performance.
- Customer Support: Expert advice and support available for all your tool-related questions.
Upgrade your toolkit with our exceptional collection of tools. Perfect for professionals and DIY enthusiasts alike, our tools promise durability, precision, and unbeatable performance.