TOOLS & TEST INSTRUMENTS

Items 1 to 100 of 1054 total

BRAND: hilmor

ID: #TC200-1S9-0094
$24.00 USD
Uses a pressurized source to launch a foam puck into the line set to wipe the pipe clean of contaminants and remaining refrigerants Simply connect...
SKU:
HLP038
Vendor:
hilmor
Type:
Foam Pig
Availability:
Out-Stock
$24.00 USD

BRAND: hilmor

ID: #TC200-1S9-0096
$19.00 USD
Uses a pressurized source to launch a foam puck into the line set to wipe the pipe clean of contaminants and remaining refrigerants Simply connect...
SKU:
HLP099
Vendor:
hilmor
Type:
Foam Pig Kit
Availability:
In-Stock
$19.00 USD

BRAND: Diversitech

ID: #D100-1S9-1097

Available in 2-4 days

Sold Out
Drain suction attachment for all manufacturers' equipment Produces 20" of vacuum to dislodge blockages from drain lines For use with air, nitrogen and CO2 1/4"...
SKU:
DK-75
Vendor:
Diversitech
Type:
Drain Kat
Availability:
Out-Stock
Sold Out

BRAND: Supplyshop

$275.00 USD
MASTERJ's 1-50, 2-30 NAO will accommodate up to (1) 50lb. cylinder, (3) 30lb. cylinders, (1) Nitrogen or B-Tank, (1) Acetylene & (1) Oxygen tank.
SKU:
TH150230NAO
Vendor:
Supplyshop
Type:
Availability:
In-Stock
$275.00 USD

BRAND: JB

ID: #JB100-1S9-0062

Available in 2-4 days

$112.00 USD
Designed to remove and replace valve cores without losing system charge Convenient slide valve side port to accommodate a vacuum gauge In-line actuated handle for...
SKU:
A32525SV
Vendor:
JB
Type:
Slide Valve Core Removal Tool
Availability:
In-Stock
$112.00 USD

BRAND: Parker Hannifin Corporation

ID: #PHC100-1S9-1016

Available in 2-4 days

Sold Out
Specially designed Rothenberger jaws are approved for use with ZoomLock MAX fittings Choose from three kN (kilonewtons) versions Jaws are laser hardened Guaranteed for Life...
SKU:
MZK-32KN-J22
Vendor:
Parker Hannifin Corporation
Type:
MAX Jaw
Availability:
Out-Stock
Sold Out

BRAND: Supco

ID: #S150-1S9-0051

Available in 2-4 days

$198.00 USD
Measures insulation values up to 1,000 megohms at 500V 20 to 1000 megohms indicator range
SKU:
M500
Vendor:
Supco
Type:
Megohmmeter
Availability:
In-Stock
$198.00 USD

BRAND: Yellow Jacket

ID: #TYJ100-1S9-1006

Available in 2-4 days

$12.00 USD
For use with Yellow Jacket gauges
SKU:
49100
Vendor:
Yellow Jacket
Type:
Tool
Availability:
In-Stock
$12.00 USD

BRAND: Supplyshop

$265.00 USD
MASTERJ's 3-30 NAO will accommodate up to (3) 30lb. cylinders, (1) Nitrogen or B-Tank, (1) Acetylene & (1) Oxygen tank.
SKU:
TH330NAO
Vendor:
Supplyshop
Type:
Availability:
In-Stock
$265.00 USD

BRAND: Supco

ID: #S150-1S9-0053
$114.66 USD
Rates run, start and DC electrolytic capacitors Ranges: 0.01 to 10 MFD and 10 to 10,000 MFD Includes carrying case
SKU:
MFD-10
Vendor:
Supco
Type:
Digital Capacitor Tester
Availability:
In-Stock
$114.66 USD

BRAND: Malco

ID: #E200-1S9-0300
$134.34 USD
Crimps 24 to 30 gauge galvanized round duct, including spiral duct 5 times faster than hand crimpers Requires 12V (minimum) cordless or 7A (maximum) corded...
SKU:
C5A2
Vendor:
Malco
Type:
TurboCrimper®
Availability:
In-Stock
$134.34 USD

BRAND: Eaton

ID: #E200-1S9-0001
Sold Out
SPDT, screw terminals, 1" H, 12.3 oz. operating force Replaces Micro #BA-2R-A2, Arrow Hart #HD3-Z2 and Unimax #2HL-5 Used on conveyors, packaging machinery, security alarms,...
SKU:
E47CMS01-JS
Vendor:
Eaton
Type:
Pin Actuator
Availability:
Out-Stock
Sold Out

BRAND: Supplyshop

$195.00 USD
MASTERJ's TH330 is an ideal refrigerant rack for standard size vans. The rack can be mounted both vertical and horizontal.TH330 will accommodate up to (3)...
SKU:
TH330
Vendor:
Supplyshop
Type:
Availability:
In-Stock
$195.00 USD

BRAND: Malco

ID: #E200-2SH9-0406
$43.52 USD
Combination lead double thread design Single starting thread machined down to very tip of screw point Instantly penetrates and engages in heavy gauge sheet metal...
SKU:
PO8X2ZWT
Vendor:
Malco
Type:
Sheet Metal Screws
Availability:
In-Stock
$43.52 USD

BRAND: Malco

ID: #E200-2SH9-0402
$28.60 USD
Reversible 7 mm and 8 mm hex sizes 7 mm hex allows access in tight areas Easy-clean magnet One-piece driver strength and durability
SKU:
MSHXLCM3
Vendor:
Malco
Type:
Dual-Sided Reversible Hex Driver
Availability:
In-Stock
$28.60 USD

BRAND: Malco

ID: #E200-2SH9-0399
$19.35 USD
Reversible 7 mm and 8 mm hex sizes 7 mm hex allows access in tight areas Easy-clean magnet One-piece driver strength and durability
SKU:
MSHMLCM3
Vendor:
Malco
Type:
Dual-Sided Reversible Hex Driver
Availability:
In-Stock
$19.35 USD

BRAND: Malco

ID: #E200-2SH9-0398
$49.00 USD
Reversible 7 mm and 8 mm hex sizes 7 mm hex allows access in tight areas Easy-clean magnet One-piece driver strength and durability
SKU:
MSHCM3
Vendor:
Malco
Type:
Dual-Sided Reversible Hex Driver
Availability:
In-Stock
$49.00 USD

BRAND: Malco

ID: #E200-2SH9-0397
$57.80 USD
Hardened alloy steel blades offer maximum cutting life Latch is accessible from left, right or top Fast adjusting, long life pivot bolt Easy replacement of...
SKU:
M2007
Vendor:
Malco
Type:
Aviation Snips
Availability:
In-Stock
$57.80 USD

BRAND: Malco

ID: #E200-2SH9-0395
$55.70 USD
For straight shearing, mild curve cuts and multiple layers of material Strong lightweight aluminum frame Long life inlaid steel blades
SKU:
M14A
Vendor:
Malco
Type:
Straight Aluminum Snips
Availability:
In-Stock
$55.70 USD

BRAND: Malco

ID: #E200-2SH9-0394
$50.30 USD
For straight shearing, mild curve cuts and multiple layers of material Strong lightweight aluminum frame Long life inlaid steel blades
SKU:
M12A
Vendor:
Malco
Type:
Straight Aluminum Snips
Availability:
In-Stock
$50.30 USD

BRAND: Malco

ID: #E200-2SH9-0393
$55.60 USD
Extra sharp, precision broached teeth for superior gripping power Jaws forged from premium grade US steel for increased strength and long-life Large adjustment knob and...
SKU:
LP7WC
Vendor:
Malco
Type:
Curved Jaw Locking Pliers
Availability:
In-Stock
$55.60 USD

BRAND: Malco

ID: #E200-2SH9-0392
$55.60 USD
Extra sharp, precision broached teeth for superior gripping power Jaws forged from premium grade US steel for increased strength and long-life Large adjustment knob and...
SKU:
LP7R
Vendor:
Malco
Type:
Straight Jaw Locking Pliers
Availability:
In-Stock
$55.60 USD

BRAND: Malco

ID: #E200-2SH9-0391
$57.40 USD
Extra sharp, precision broached teeth for superior gripping power Jaws forged from premium grade US steel for increased strength and long-life Large adjustment knob and...
SKU:
LP10WC
Vendor:
Malco
Type:
Curved Jaw Locking Pliers
Availability:
In-Stock
$57.40 USD

BRAND: Malco

ID: #E200-2SH9-0390
$57.40 USD
Extra sharp, precision broached teeth for superior gripping power Jaws forged from premium grade US steel for increased strength and long-life Large adjustment knob and...
SKU:
LP10R
Vendor:
Malco
Type:
Straight Jaw Locking Pliers
Availability:
In-Stock
$57.40 USD

BRAND: Malco

ID: #E200-1S9-0389
$52.50 USD
Combination lead double thread design Single starting thread machined down to very tip of screw point Instantly penetrates and engages in heavy gauge sheet metal...
SKU:
HW8X3ZWT
Vendor:
Malco
Type:
Sheet Metal Screws
Availability:
In-Stock
$52.50 USD

BRAND: Malco

ID: #E200-1S9-0388
$424.05 USD
Combination lead double thread design Single starting thread machined down to very tip of screw point Instantly penetrates and engages in heavy gauge sheet metal...
SKU:
HW8X3/4Z
Vendor:
Malco
Type:
Sheet Metal Screws
Availability:
In-Stock
$424.05 USD

BRAND: Malco

ID: #E200-1S9-0387
$216.90 USD
Combination lead double thread design Single starting thread machined down to very tip of screw point Instantly penetrates and engages in heavy gauge sheet metal...
SKU:
HW8X2Z
Vendor:
Malco
Type:
Sheet Metal Screws
Availability:
In-Stock
$216.90 USD

BRAND: Malco

ID: #E200-1S9-0386
$359.00 USD
Combination lead double thread design Single starting thread machined down to very tip of screw point Instantly penetrates and engages in heavy gauge sheet metal...
SKU:
HW8X1Z
Vendor:
Malco
Type:
Sheet Metal Screws
Availability:
In-Stock
$359.00 USD

BRAND: Malco

ID: #E200-1S9-0385
$440.30 USD
Combination lead double thread design Single starting thread machined down to very tip of screw point Instantly penetrates and engages in heavy gauge sheet metal...
SKU:
HW7X1/2Z
Vendor:
Malco
Type:
Sheet Metal Screws
Availability:
In-Stock
$440.30 USD

BRAND: Malco

ID: #E200-1S9-0384
$61.00 USD
Combination lead double thread design Single starting thread machined down to very tip of screw point Instantly penetrates and engages in heavy gauge sheet metal...
SKU:
HW10X1/2ZT
Vendor:
Malco
Type:
Sheet Metal Screws
Availability:
In-Stock
$61.00 USD

BRAND: Malco

ID: #E200-1S9-0383
$10.50 USD
WARRANTY - Johnstone Supply will administer and promptly process all warranties in accordance with the manufacturer's specific warranty policies and procedures. WHOLESALE ONLY - Identification...
SKU:
CONNEXT2
Vendor:
Malco
Type:
MagneticHand Driver
Availability:
In-Stock
$10.50 USD
WARRANTY - Johnstone Supply will administer and promptly process all warranties in accordance with the manufacturer's specific warranty policies and procedures. WHOLESALE ONLY - Identification...
SKU:
CONNEXT1
Vendor:
Malco
Type:
MagneticHand Driver
Availability:
In-Stock
$11.90 USD

BRAND: Malco

ID: #E200-1S9-0381
$66.30 USD
Drills its own hole and taps a matching thread in less time than it takes to drill a pilot hole for other standard fasteners Produces...
SKU:
BT144T
Vendor:
Malco
Type:
Sheet Metal Screws
Availability:
In-Stock
$66.30 USD

BRAND: Malco

ID: #E200-1S9-0380
$44.88 USD
Drills its own hole and taps a matching thread in less time than it takes to drill a pilot hole for other standard fasteners Produces...
SKU:
BT141T
Vendor:
Malco
Type:
Sheet Metal Screws
Availability:
In-Stock
$44.88 USD
Combination lead double thread design Single starting thread machined down to very tip of screw point Instantly penetrates and engages in heavy gauge sheet metal...
SKU:
HW8X1/2Z
Vendor:
Malco
Type:
Sheet Metal Screws
Availability:
In-Stock
$382.54 USD

BRAND: Malco

ID: #E200-2SH9-0186
$89.20 USD
Make or remake clean locking tabs in vinyl pickets and rails on the job. Compound leverage produces 7 to 1 mechanical advantage. Ergonomic Redline Handles...
SKU:
VFN2
Vendor:
Malco
Type:
Vinyl Fence Rail Notcher
Availability:
In-Stock
$89.20 USD

BRAND: Malco

ID: #E200-2SH9-0020
$118.60 USD
Available in 19 sizes to get any number of jobs done fast! Aggressive carbide tipped teeth with deep self-cleaning gullets easily cut thick or layered...
SKU:
HF15
Vendor:
Malco
Type:
Quick Action Carbide Tipped Hole Saw
Availability:
In-Stock
$118.60 USD

BRAND: Malco

ID: #E200-2SH9-0021
$124.20 USD
Malco’s Fiberglass Duct Board Washers help to reinforce sheet metal components to fiberglass duct. Use with #8 screw for fastening components.Features: For use with wire-reinforced...
SKU:
RW732
Vendor:
Malco
Type:
Duct Board Washer
Availability:
In-Stock
$124.20 USD

BRAND: Malco

ID: #E200-2SH9-0022
$127.40 USD
Easily organize, protect and safely transport your valuable tools-of-the-trade with a job-site-quality, 33-pocket tool backpack. Durable construction offers long service life and features a dense,...
SKU:
TBP33
Vendor:
Malco
Type:
Pocket Tool Backpack
Availability:
In-Stock
$127.40 USD

BRAND: Malco

ID: #E200-2SH9-0023
$13.00 USD
Power drive 1/4-inch hex shank fits any electric power drill or 1/4-inch power drive holder. Accepts 1/4-inch hex shank insert bits.
SKU:
MBH14
Vendor:
Malco
Type:
Magnetic Bit Holder
Availability:
In-Stock
$13.00 USD

BRAND: Malco

ID: #E200-2SH9-0024
$13.10 USD
Features: For use with Type "A" hex head screws and Malco's Zip-In screws Hex opening of a 5/16 inch Magnetic nose keeps fastener in place...
SKU:
HHD2S
Vendor:
Malco
Type:
Connext Magnetic Hex Driver
Availability:
In-Stock
$13.10 USD
Malco precision fit and hardened Magnetic Hex Chuck Drivers, with 1/4-inch power insert shanks, meet on-the-job demands for performance and service life whether installed on...
SKU:
MSH38P
Vendor:
Malco
Type:
Short Magnetic Hex Chuck Driver
Availability:
In-Stock
$13.20 USD

BRAND: Malco

ID: #E200-2SH9-0027
$129.20 USD
Make your drill a double-cut metal shear. Now you can get double-cut performance in a Versatile Malco TurboShear. The versatile model TSMD TurboShear Drill Attachment...
SKU:
TSMD
Vendor:
Malco
Type:
Double Cutting TurboShear
Availability:
In-Stock
$129.20 USD

BRAND: Malco

ID: #E200-2SH9-0028
$144.00 USD
All Malco Gutter Outlet Punch and Dies make clean, accurate hole cuts in .032” (0.81 mm) aluminum gutter. Ample throat clearance allows these lightweight outlet...
SKU:
GOT
Vendor:
Malco
Type:
Gutter Outlet Tool Frame
Availability:
In-Stock
$144.00 USD

BRAND: Malco

ID: #E200-2SH9-0029
$145.80 USD
1/4" (6.4 mm) bearings allow bearing holes to be made in round duct with the use of a scratch awl. Squeeze pipe so that it...
SKU:
D6AST
Vendor:
Malco
Type:
Pre-Assembled Damper w/ Wing Nuts
Availability:
In-Stock
$145.80 USD

BRAND: Malco

ID: #E200-2SH9-0030
$14.70 USD
POWER-FIT™ Performance Hand Grips naturally distribute pressure evenly across your hand resulting in a more natural feel and less fatigue. Ergonomic hand guards allow users...
SKU:
AV3
Vendor:
Malco
Type:
Aviation Snips
Availability:
In-Stock
$14.70 USD

BRAND: Malco

ID: #E200-2SH9-0031
$14.00 USD
Features: For use with Type "A" hex head screws and Malco's Zip-In screws Hex opening of a 1/4 inch Magnetic nose keeps fastener in place...
SKU:
HHD3T
Vendor:
Malco
Type:
Connext Magnetic Hex Driver
Availability:
In-Stock
$14.00 USD

BRAND: Malco

ID: #E200-2SH9-0032
$14.80 USD
A quick change CT, carbide tipped pilot drill with a tight, gripping hex shank.Features: Quick change pilot drill Carbide tipped Overall length is 7-3/4 in....
SKU:
HH5
Vendor:
Malco
Type:
Quick Change Pilot Drill
Availability:
In-Stock
$14.80 USD
Description – A Full line selection of Reciprocating Saw Blades FEATURING: SUPER SHARP and TOUGH BiMetal By Malco, used for metal sheet, pipe, profiles under...
SKU:
4MC24
Vendor:
Malco
Type:
BiMetal Metal Saw Blades
Availability:
In-Stock
$15.00 USD

BRAND: Malco

ID: #E200-2SH9-0034
$15.20 USD
Description – Use Malco Nylon Ties to install flexible duct to take-offs, or secure bundles, up to 15" (38 cm) diameter. Made of 100% nylon,...
SKU:
TY34
Vendor:
Malco
Type:
Nylon Ties
Availability:
In-Stock
$15.20 USD
Description – A Full line selection of Reciprocating Saw Blades FEATURING: SUPER SHARP and TOUGH BiMetal By Malco.THEY STACK UP BETTER: For wood with nails,...
SKU:
4KH7
Vendor:
Malco
Type:
High Carbon Steel Saw Blades for Wood
Availability:
In-Stock
$15.40 USD

BRAND: Malco

ID: #E200-2SH9-0036
$15.40 USD
POWER-FIT™ Performance Hand Grips naturally distribute pressure evenly across your hand resulting in a more natural feel and less fatigue. Ergonomic hand guards allow users...
SKU:
AV2
Vendor:
Malco
Type:
Aviation Snips
Availability:
In-Stock
$15.40 USD

BRAND: Malco

ID: #E200-2SH9-0037
$16.40 USD
With an overall length of only 7-1/8 inches (181 mm), the AVsMini easily goes to work in tight or awkward spaces where full-size aviation snips...
SKU:
AVM6-EV
Vendor:
Malco
Type:
Aviation Mini-Snip
Availability:
In-Stock
$16.40 USD

BRAND: Malco

ID: #E200-2SH9-0038
$16.40 USD
– 5/16" Ratchet Wrench Insert, 1-5/8" Long (Pack of 2)
SKU:
RRW516P
Vendor:
Malco
Type:
Ratchet Wrench Insert
Availability:
In-Stock
$16.40 USD
A unique thread design and quality controlled manufacture spell the Zip-In difference. Zip-In's sophisticated heat treat process allows the screw to taper to a fine,...
SKU:
HW8X3/4ZP
Vendor:
Malco
Type:
Sheet Metal Screws
Availability:
In-Stock
$157.70 USD

BRAND: Malco

ID: #E200-2SH9-0040
$150.80 USD
Available in 19 sizes to get any number of jobs done fast! Aggressive carbide tipped teeth with deep self-cleaning gullets easily cut thick or layered...
SKU:
HF16
Vendor:
Malco
Type:
Quick Action Carbide Tipped Hole Saw
Availability:
In-Stock
$150.80 USD

BRAND: Malco

ID: #E200-2SH9-0041
$16.70 USD
For installing or servicing heating, air conditioning or refrigeration units. Facilitates easy ratcheting action for servicing hard to access valves common in air condition and...
SKU:
RRW3
Vendor:
Malco
Type:
Refrigeration Ratchet Wrench
Availability:
In-Stock
$16.70 USD
Style: No. 8 Head Size: 1/4" Length: 3/4" Quantity: 5,000 Package Type: Pail Single starting thread machined down to very tip of screw point. Instantly...
SKU:
HW8X11/2ZT
Vendor:
Malco
Type:
Sheet Metal Screws
Availability:
In-Stock
$16.80 USD

BRAND: Malco

ID: #E200-2SH9-0043
$17.00 USD
Impact-grade 6-inch Power Drive with 4-1/2" anodized aluminum sleeve provides extra reach without marring gutter Holds and guides 1/4" hex head screws up to 2...
SKU:
GSG6
Vendor:
Malco
Type:
Magnetic Gutter Screw Guide
Availability:
In-Stock
$17.00 USD

BRAND: Malco

ID: #E200-2SH9-0044
$173.50 USD
Lightweight shear head for easy one-hand control and a telescoping clamp that fits large or small drill housings.Now turn your power drill into a "Fiber...
SKU:
TSF1
Vendor:
Malco
Type:
TurboShear
Availability:
In-Stock
$173.50 USD

BRAND: Malco

ID: #E200-2SH9-0045
$18.10 USD
Maneuverable compact length. Sharply defined cut. Comfortably fits any size hand. Spring-actuated, handles will not collapse. Self-opening latch will not accidentally catch or close.
SKU:
AVM7-EV
Vendor:
Malco
Type:
Aviation Mini-Snip
Availability:
In-Stock
$18.10 USD

BRAND: Malco

ID: #E200-2SH9-0046
$18.60 USD
The Malco 48Ar is a 48" Aluminum Rule. This 48" aluminum straight-edge ruler is desined with a .125 thickness extruded aluminum construction, and large, clear,...
SKU:
48A
Vendor:
Malco
Type:
Straight Edge Ruler
Availability:
In-Stock
$18.60 USD
Head Size: 1/4" Length: 1" Number: 8 Quantity: 500 Package Type: Tub Undercut-indented hex washer slotted head Bright Zinc Plated Burr Fee Full 1/4" (no...
SKU:
HW8X1ZT
Vendor:
Malco
Type:
Sheet Metal Screws
Availability:
In-Stock
$18.70 USD

BRAND: Malco

ID: #E200-2SH9-0048
$19.40 USD
Machined head has self aligning zinc drawbolt for easy blade installation Satin finish steel blades are precision stamped in eighths and sixteenths on each side...
SKU:
SCS12
Vendor:
Malco
Type:
Square Combination
Availability:
In-Stock
$19.40 USD
Head Size: 1/4" Length: 2" Number: 8 Quantity: 250 Package Type: Tub Single starting thread machined down to very tip of screw point Instantly penetrates...
SKU:
HW8X2ZT
Vendor:
Malco
Type:
Sheet Metal Screws
Availability:
In-Stock
$19.50 USD

BRAND: Malco

ID: #E200-2SH9-0050
$190.00 USD
Lightweight shear head for easy one-hand control.Telescoping Clamp fits large or small drill housing.Make your power drill a powerful slate-cutting shear! The Malco Turboshear Model...
SKU:
TSNS1
Vendor:
Malco
Type:
TurboShear Slate - Cutting Drill Attachment
Availability:
In-Stock
$190.00 USD

BRAND: Malco

ID: #E200-2SH9-0051
$192.00 USD
Lightweight shear head for easy one-hand control.Telescoping Clamp fits large or small drill housing.Cuts 1/2" (13 mm) BackerboardFast straight cuts and arcs with less dust....
SKU:
TSF2
Vendor:
Malco
Type:
TurboShear
Availability:
In-Stock
$192.00 USD

BRAND: Malco

ID: #E200-2SH9-0052
$2.50 USD
SKU:
M2000S
Vendor:
Malco
Type:
Replacement Spring
Availability:
In-Stock
$2.50 USD

BRAND: Malco

ID: #E200-2SH9-0053
$19.60 USD
SKU:
M14NRB
Vendor:
Malco
Type:
Replacement Blades for Tin Snips
Availability:
In-Stock
$19.60 USD

BRAND: Malco

ID: #E200-2SH9-0054
$19.70 USD
M12A  for pattern, straight shearing, mild curve cuts, and multiple layers of material. MC12A for combination cuts left or right and straight cuts. Sleek styling,...
SKU:
M14ARB
Vendor:
Malco
Type:
Replacement Blade Set
Availability:
In-Stock
$19.70 USD

BRAND: Malco

ID: #E200-2SH9-0055
$19.80 USD
HSS - high speed steel quick change pilot drill Use with Malco quick connect arbor part number HA3 to eject saw plugs with ease Overall...
SKU:
HH4
Vendor:
Malco
Type:
Quick Change Pilot Drill
Availability:
In-Stock
$19.80 USD

BRAND: Malco

ID: #E200-2SH9-0056
$20.00 USD
Snap lock plastic skirting and siding to finishing trim. Makes tabs in the cut edge of siding panel used as a finishing course at top...
SKU:
SL5
Vendor:
Malco
Type:
Snap Lock Punch
Availability:
In-Stock
$20.00 USD

BRAND: Malco

ID: #E200-2SH9-0057
$187.50 USD
Trouble FREE tool operation and secure clip connection Easy-loading magazine with 25 clip capacity won't slow you down 12-gauge (2.5 mm) steel clips will not...
SKU:
PT1
Vendor:
Malco
Type:
PEX to Wire Tool
Availability:
In-Stock
$187.50 USD

BRAND: Malco

ID: #E200-2SH9-0058
$22.20 USD
Produces cuts in ABS, PVC, rubber and fabric reinforced hose up to 1" (25.4 mm) I.D. Rigid, durable nylon handle design provides sufficient leverage when...
SKU:
TC400
Vendor:
Malco
Type:
Plastic Tube Slicer
Availability:
In-Stock
$22.20 USD

BRAND: Malco

ID: #E200-2SH9-0059
$22.50 USD
Fits 3/8-inch (10 mm) or larger electric power drills Holder accepts 1/4-inch hex shank chuck drivers and bits Chuck drivers and bits can be inserted...
SKU:
HAD1
Vendor:
Malco
Type:
Hex Quick Change Adapter
Availability:
In-Stock
$22.50 USD
A Full line selection of Reciprocating Saw Blades FEATURING: SUPER SHARP and TOUGH BiMetal By Malco, used for rough-in, mild contours in wood with nails.THEY...
SKU:
4KH6
Vendor:
Malco
Type:
Milled Variable/Standard Reciprocating BiMetal Wood Saw Blade
Availability:
In-Stock
$23.50 USD
Head Size: 1/4" Number: 8 Length: 1-1/2" Color: White Quantity: 250 Package Type: Tub Undercut-indented hex washer slotted head White Painted Burr Fee Full 1/4"...
SKU:
HW8X11/2ZWT
Vendor:
Malco
Type:
Sheet Metal Screws
Availability:
In-Stock
$23.80 USD

BRAND: Malco

ID: #E200-2SH9-0062
$24.20 USD
Trim Nail Punch with Retaining Clip for easier nailing from any angle or height, Malco offers a Trim Nail Punch with an exclusive, “nail retaining...
SKU:
TNP2R
Vendor:
Malco
Type:
Trim Nail Punch with Retaining Clip
Availability:
In-Stock
$24.20 USD

BRAND: Malco

ID: #E200-2SH9-0063
$24.40 USD
Heavy Duty Trim Nail Punches drive trim nails into soffit, fascia and other finishing trim without denting or marring material. All-steel nose and aluminum tail...
SKU:
TNP2S
Vendor:
Malco
Type:
Heavy Duty Trim Nail Punch
Availability:
In-Stock
$24.40 USD

BRAND: Malco

ID: #E200-2SH9-0064
$24.50 USD
Durable, reliable, built rugid Top quality products that work hard Enhanced performance for the trade professional
SKU:
HSRD
Vendor:
Malco
Type:
Vent Saw Replacement Drill Bit
Availability:
In-Stock
$24.50 USD

BRAND: Malco

ID: #E200-2SH9-0065
$24.50 USD
Bolt Capacities: 4-40, 5-40, 6-32 Cutting Capacities: 8-32, 10-32, 10-24 Crimping: 22-10 ga. Stripping: 22-10 ga. O/A Length: 8 1/4" Weight: 8 oz. (227 g.)...
SKU:
WSC8
Vendor:
Malco
Type:
Electrical Cutter/Stripper/Crimper Plier
Availability:
In-Stock
$24.50 USD

BRAND: Malco

ID: #E200-2SH9-0066
$255.00 USD
No distortion or compression Straight square cuts
SKU:
FCC4
Vendor:
Malco
Type:
Fiber Cement Siding Guillotine Shear
Availability:
In-Stock
$255.00 USD
Length: 1/2" Number: 7 Head Size: 1/4" Quantity: 1,000 Undercut-indented hex washer slotted head Bright Zinc Plated Burr Fee Full 1/4" (no 7) head will...
SKU:
HW7X1/2ZT
Vendor:
Malco
Type:
Sheet Metal Screws
Availability:
In-Stock
$25.50 USD

BRAND: Malco

ID: #E200-2SH9-0068
$22.50 USD
SKU:
MC12ARB
Vendor:
Malco
Type:
Replacement Blade
Availability:
In-Stock
$22.50 USD
Undercut-indented hex washer slotted head Bright Zinc Plated Burr Free Full 1/4" (no. 8) head will not strip out of hex driver opening One 1/4"...
SKU:
HW6X3/8ZT
Vendor:
Malco
Type:
Sheet Metal Screws
Availability:
In-Stock
$26.20 USD

BRAND: Malco

ID: #E200-2SH9-0055
$244.40 USD
SmartClips are installed with the aid of an easy-to-use, top loading, magazine fed SmartTool Stapler. The ergonomic SmartTool attaches SmartClips to the wire grid from...
SKU:
SM2
Vendor:
Malco
Type:
SmartClips for SM1 Stapler
Availability:
In-Stock
$244.40 USD

BRAND: Malco

ID: #E200-2SH9-0071
$26.60 USD
Replacement Blade for MC14N
SKU:
MC14NRB
Vendor:
Malco
Type:
Replacement Blade
Availability:
In-Stock
$26.60 USD
Head Size: 1/4" Length: 1/2" Number: 8 Quantity: 1,000 Package Type: Tub Single starting thread machined down to very tip of screw point Instantly penetrates...
SKU:
HW8X11/2ZWT
Vendor:
Malco
Type:
Sheet Metal Screws
Availability:
Out-Stock
Sold Out

BRAND: Malco

ID: #E200-2SH9-0073
$26.70 USD
Easily cut thick or layered building materials including wood, wall tile, fiberglass, plastic, even fiber-cement siding! Eject saw plugs with ease too! These carbide tipped...
SKU:
HF3
Vendor:
Malco
Type:
Quick Action Carbide Tipped Hole Saw
Availability:
In-Stock
$26.70 USD

BRAND: Malco

ID: #E200-2SH9-0074
$27.00 USD
Replacement Blades for 14" Andy (MC14A) Combination Snips
SKU:
MC14ARB
Vendor:
Malco
Type:
Replacement Blades for MC14A Combination Snips
Availability:
In-Stock
$27.00 USD

BRAND: Malco

ID: #E200-2SH9-0075
$27.40 USD
Using the Facing Gauge while nailing across the width of the plank assures greater accuracy of the desired exposure and guards against sagging.The Malco Overlap...
SKU:
FCMS
Vendor:
Malco
Type:
Fiber Cement Mixed Gauge Set
Availability:
In-Stock
$27.40 USD

BRAND: Malco

ID: #E200-2SH9-0076
$28.00 USD
For C5A2 TurboCrimper IMPACTThis Replacement Drive Shaft fits the Malco C5A2 power-assisted TurboCrimper IMPACT attachment for use with impact drivers equipped with a 1/4 in....
SKU:
C5A2RD-EV
Vendor:
Malco
Type:
Drive Shaft
Availability:
In-Stock
$28.00 USD

BRAND: Malco

ID: #E200-2SH9-0077
$28.20 USD
Cuts in tight spaces and overhead Easy gripping for push or pull motion left cuts Powerful non-slip cutting leverage
SKU:
AV8
Vendor:
Malco
Type:
Left Cut Vertica Aviation Snips
Availability:
In-Stock
$28.20 USD

BRAND: Malco

ID: #E200-2SH9-0078
$28.40 USD
Slotted front for easy loading. Ladder size hang hook. 1/10 gallon capacity. 12:1 thrust ratio. Net Weight 28 oz. (0.80 kg)
SKU:
CG18
Vendor:
Malco
Type:
Double Gripping Power Grip Caulking Gun
Availability:
In-Stock
$28.40 USD
Qty: 500 Screw Size: 8-18x3/4. Head Type: (HW) Hex Washer Not Slotted Driver Size: 1/4" Hex Length of screw: 3/4" Bit-Tip screw #2 Point Material...
SKU:
BT133T
Vendor:
Malco
Type:
Sheet Metal Screws
Availability:
In-Stock
$29.00 USD

BRAND: Malco

ID: #E200-2SH9-0080
$29.30 USD
IMPROVED MAX2000 SNIPS FIT ANY HAND WITHOUT SACRIFICING CUT. Malco Max2000 Aviation Snips now feature all-new, molded thermoplastic grips. These easy-to-spot, solid color coded grips...
SKU:
M2002
Vendor:
Malco
Type:
Aviation Snips with Green Grip
Availability:
In-Stock
$29.30 USD

BRAND: Malco

ID: #E200-2SH9-0081
$294.00 USD
USE MALCO "DUAL-BARBED" STAPLES FOR SUPERIOR HOLDING POWER! Specify Malco No. FBSN1, 1-1/2-in. Staples for 1-in. foamboard. Specify Malco No. FBSN2, 2-1/2-in. Staples for 2-in....
SKU:
FBSN
Vendor:
Malco
Type:
Wood/Foamboard Stapler
Availability:
In-Stock
$294.00 USD

BRAND: Malco

ID: #E200-2SH9-0019
$123.00 USD
Note: This item does not come with a drill.This versatile and portable TurboShear fits a drill you already own to make easy cross cuts, fast...
SKU:
TSCM
Vendor:
Malco
Type:
TurboShear - Corrugated Metal Attachment
Availability:
In-Stock
$123.00 USD

BRAND: Malco

ID: #E200-2SH9-0082
$294.00 USD
Twice the cutting life 30% less force to operate Two working table heights Sure-handed control Easy angle cuts Safe to carry on job
SKU:
SCSRC1RB
Vendor:
Malco
Type:
Replacement Blade for Stone Coated Steel Roofing Cutter
Availability:
In-Stock
$294.00 USD

BRAND: Malco

ID: #E200-2SH9-0083
$3.20 USD
Replacement Shoe for Hole Cutter essential for full utilization of tool.
SKU:
HC1G
Vendor:
Malco
Type:
Replacement Shoe for Hole Cutte
Availability:
In-Stock
$3.20 USD