X-17s | 4 Relay, 4 Input Expansion Module

Availability:
Out-Stock
The X-17s expansion module has 4 relays and 4 digital inputs which can be accessed through an X-400 or X-600M controller.

$10,000.00 USD

Sold Out

SKU:
X-17s

PRODUCT INFO

The X-17s™ expansion module is used in conjunction with an X-400 or X-600M controller. The X-17s is a multi-function module with four relays and four optically-isolated digital inputs. One or more X-17s expansion modules can be connected to an X-400 or X-600M controller with a ribbon cable which provides both power and communications.
The four relays have Form-A contacts (SPST) and can be used to control moderate loads such as solenoid valves, alarms and indicator lights.
The isolated inputs are suitable for use in industrial environments and allow the grounding system of the monitored equipment and the low voltage circuits of the X-17s to be electrically separate. Internally the X-17s has a co-processor which provides enhanced features including: pulse counting, pulse duration, accumulated pulse time and frequency measurements. All four inputs have separate measurements. Programmable de-bounce timers allow glitches and short pulses to be filtered out.
The X-400 or X-600M together with the X-17s provide an easy, flexible and reliable way to monitor sensors and control devices over a network. The X-17s is suitable for use with security systems, freezer doors, light switches and water meters, as well as with moderate loads such as solenoid valves, alarms and indicator lights.
Other expansion modules with different I/O combinations are also available.

  Features:

  • Four isolated relays (SPST)
  • Relay Functions:
  1. On
  2. Off
  3. Pulse
  • Four optically-isolated digital inputs (common negative)
  • Input Functions:
  1. On/Off Status
  2. Pulse Count
  3. Pulse Duration
  4. Accumulated Pulse Time
  5. Frequency
  • Powered through expansion bus - no separate power supply connections are required
  • Eight LEDs for inputs and outputs
  • Removable terminal connector

X-17s Part Number:

X-17s
OUTPUTS: 4 Relays (125VAC, 30VDC)
INPUTS: 4 Digital (3-26VDC)
POWER SUPPLY: 9-28 VDC (supplied via the X-400 or X-600M controller, 24V recommended)

Electromagnetic Compliance:

  • IEC CISPR 22, CISPR 24
  • FCC 47CFR15 (Class B)
  • EN55024 ITE Immunity (2010)
  • EN55022 Emissions (2010)

Product Safety Compliance:

  • IEC 61010-1

SPECIFICATIONS

Relay Contacts
Number of Relays4
Max Voltage125VAC, 30VDC
Max Current2.5A
Contact TypeSPST (Form A)
Load TypeGeneral Purpose
Contact Resistance< 100 milliohms initial
Contact MaterialAgSnO2
Electrical Life100K operations (Min)
Mechanical Life5M cycles (Min)
Environmental RatingOver voltage Category II, Pollution Degree 2
Relay ModesOn/Off or Pulsed
Pulse Timer Duration0.1 to 86,400 Seconds (1-day)


Digital Inputs
Number of Inputs4
TypeOptically-Isolated
Voltage Range3-26 VDC
Current0.6mA @ 3V, 8.2mA @ 26V
Minimum Hold Time2.5mS
Input Isolation1500V
Input FunctionsMonitor State, Control Relays, Control Remote Relays, Count, Frequency, High Time, ON Time
Maximum Count32-bit
Max Count Rate200Hz
Edge TriggerRising, Falling or Both
High TimePulse width (4,194,304 seconds max)
On TimeAccumulated time an input is asserted (4,194,304 seconds max)
Frequency1 Hz min, 200 Hz max


Connectors

Relays & Inputs
14-Position, 3.81mm terminal spacing, Removable. For 16-28 AWG wire.
Expansion Connector
Ribbon cable, 10-conductor, polarized, 2x5-position, 0.100" pitch Provides power and communications for expansion modules (Communications: RS-485)
LED Indicators

Number of LEDs

9 (Power on; Relay coil energized 1-4; Digital Inputs 1-4)

 

Power Requirements
Voltage9-28 VDC (supplied via the X-400 or X-600M controller, 24V recommended)
Max Current See table below for typical values at 25°C.

 

9 VDC Power Supply
All Opto-couplers & Relays OFF
18 mA
All Opto-couplers & Relays ON
224 mA
12 VDC Power Supply

All Opto-couplers & Relays OFF
14 mA
All Opto-couplers & Relays ON
165 mA
24 VDC Power Supply

All Opto-couplers & Relays OFF
8 mA
All Opto-couplers & Relays ON
86 mA


Physical
Size

1.41in (35.7mm) wide
3.88in (98.5mm) tall
3.1in (78mm) deep (not including connector)

Weight0.3 lb
Enclosure MaterialLexan 940 Polycarbonate Plastic
Enclosure Flame RatingUL94 V0

 

Environmental
Operating Temperature-40°F to 150°F (-40°C to 65.5°C)
Storage Temperature-40°F to 185°F (-40°C to 85°C)
Humidity5-95%, non-condensing
AltitudeUp to 2,000m
Indoor use or NEMA-4 protected location