HVAC
Plumbing
ELECTRICAL
Tools & Test Instruments
Categories
Price
size
Type List
- 1 Zone Switching Relay
- 1" 2-Way Zone Sentry Valve Normally Closed (Press)
- 1" Zone Sentry Valve Normally Closed (Sweat)
- 1" Zone Sentry Valve Normally Closed (Threaded)
- 1" Zone Sentry Valve, 3 Way Normally Closed (Threaded)
- 1/2" 3-Way Zone Sentry Valve Normally Closed
- 1/2" 3-Way Zone Sentry Valve Normally Closed (Sweat)
- 1/2" 3-Way Zone Sentry Valve Normally Closed (Threaded)
- 1/2" Sweat Heat Motor Zone Valve
- 1/2" Sweat Zone Valve
- 1/2" Zone Sentry Valve Normally Closed (Sweat)
- 2 Wire Zone Valve With End Switch
- 2 Zone Switching Relay
- 2-Way Zone Sentry Valve Normally Closed (Press)
- 3 Wire Zone Valve 2 Way With End Switch
- 3 Zone Switching Relay
- 3 Zone Switching Relay w/ Priority
- 3 Zone Valve Control Module with Priority
- 3-Way Zone Sentry Valve Normally Closed (Sweat)
- 3/4" 2-Way Zone Sentry Valve Normally Closed (Flare)
- 3/4" 2-Way Zone Sentry Valve Normally Closed (Press)
- 3/4" Zone Sentry Valve Normally Closed (Threaded)
- 3/4" Zone Sentry Valve, 3 Way Normally Closed (Sweat)
- 4 Zone Valve Control Module with Priority
- 5 Zone Valve Control Module with Priority
- 6 Zone Switching Relay
- 6 Zone Valve Control Module with Priority
- 6 Zone Valve Control Module with Priority - Expandable
- Accu-Flo Hydronic Balancing Valve
- Air Vent
- Backflow Preventer
- Backflow Preventer Wrench
- Balancing Valve
- Ball Valves
- Boiler Drain Shutoff
- Cartridge Assembly
- Cast Iron Circulator
- Clean Check Rebuild Kit
- Fitting
- Flapper for Rebuild
- Flo-Chek
- Flow Switch
- Full Port Ball Valve
- Gas Ball Valve
- Gas Valve
- Heat Motor Zone Valve Replacement Power Unit
- Heat Transfer Compound
- Hydronic Control
- Immersion Control
- Immersion Well
- IPS Universal (CI)
- Lead Free Sillcock Faucet
- LeakBreaker 3/4" NPT Water Heater Shut-Off Valve & Actuator
- Miscellaneous
- Optional Power Stealing Thermostat Resistor (Pack of 6)
- Outdoor Reset Actuator Head
- Power Unit
- Pressure Reducing Valves
- Pressure Regulator
- QuickTop Zone Valve (Sweat)
- QuickTop Zone Valve Replacement w/ End Switch (24V)
- Reduced Pressure
- Reducing Valve
- Relief Valve
- Replacement Actuator Head for Zone Sentry Valves
- Replacement Cap & Disc Assemby for Taco Flo-Chek
- Seat Assembly - 3 & 4 560 Series
- Sillcock Faucet
- SlimLine Hy-Vent
- SPDT Immersion Hot Water Control
- Stem Assembly Includes Water Seal
- Strap-On Control
- Sweat Zone Valve
- Temperature Gauge for Mixing Valves
- Transformer for Valve Controls
- Universal
- Valve
- Valve & Seat Assembly for Taco 550 Zone Valves
- Valve & Seat Assembly for Taco Geothermal Zone Valves
- Valve & Seat Assembly for Taco Zone Valves
- Zone Sentry Replacement Actuator Head - Normally Open
- Zone Sentry Valve Normally Closed (Sweat)
- Zone Sentry® Zone Valve
- Zone Valve
- Zone Valve Control Module with Priority - Expandable
- Zone Valve Motor
- Zone Valve Operator
- Zone Valve Stem Assembly
- Zone Valve Stem Assembly Includes
- Zone Valve Water Seal
Brand List
Valves
Items 1 to 21 of 21 total
BRAND: RuB inc.
ID: #P420-2111
(Box of Qty. 2 Valves)
Maximum working pressure 1000 PSI (CWP)
$1,292.00 USD
Full port 316 stainless steel ball valve, 2 piece construction, glass fille PTFE packing gland, blow-out proof stem with locking blue handle. Maximum working pressure...
SKU:
130M41
Vendor:
RuB inc.
Type:
Valve
Availability:
In-Stock
$1,292.00 USD
BRAND: RuB inc.
ID: #P420-1967
(Box of Qty. 2 Valves)
Temperature rating: -40°F thru +366°F
$670.00 USD
Standard port hot forged brass ball valve, blow-out proof stem,double FPM and packing gland stem. Maximum working pressure 600 PSI (CWP). Temperature rating: -40°F thru...
SKU:
S71M45
Vendor:
RuB inc.
Type:
Ball Valves
Availability:
In-Stock
$670.00 USD
BRAND: RuB inc.
ID: #P420-1952
- Price per Box (QTY 2 valves)
- Temperature rating: -40°F thru +366°F
$648.00 USD
Standard port hot forged brass ball valve, blow-out proof stem, double FPM and packing gland stem sealing. Maximum working pressure 600 PSI (CWP). Temperature rating:...
SKU:
S71M41
Vendor:
RuB inc.
Type:
Ball Valves
Availability:
In-Stock
$648.00 USD
BRAND: RuB inc.
ID: #P420-1944
W/Steam rating 150 PSI (WSP)
$434.00 USD
Full port hot forged brass ball valve, blow-out proof stem, adjustable PTFE packing gland. Maximum working pressure 600 PSI (CWP).Temperature rating: -4°F thru +366°F. Steam...
SKU:
S42M15
Vendor:
RuB inc.
Type:
Ball Valves
Availability:
In-Stock
$434.00 USD
BRAND: RuB inc.
ID: #P420-1936
W/Steam rating 150 PSI (WSP)
$417.00 USD
Full port hot forged brass ball valve, blow-out proof stem, double FPM and packing gland stem sealing. Maximum working pressure 450 PSI (CWP). Temperature rating:...
SKU:
S42M00
Vendor:
RuB inc.
Type:
Ball Valves
Availability:
In-Stock
$417.00 USD
BRAND: RuB inc.
ID: #P420-1910
W/Steam rating 150 PSI (WSP)
$610.00 USD
Full port hot forged brass ball valve, reinforced PTFE seats, blow-out proof stem, adjustable PTFE packing gland Maximum working pressure 450 PSI (CWP). Temperature rating:...
SKU:
S92M44
Vendor:
RuB inc.
Type:
Ball Valves
Availability:
In-Stock
$610.00 USD
BRAND: RuB inc.
ID: #P420-1899
W/Steam rating 150 PSI (WSP)
$533.00 USD
Full port hot forged brass ball valve, reinforced PTFE seats, blow-out proof stem, adjustable PTFE packing gland Maximum working pressure 450 PSI (CWP). Temperature rating:...
SKU:
S92M49
Vendor:
RuB inc.
Type:
Ball Valves
Availability:
In-Stock
$533.00 USD
BRAND: RuB inc.
ID: #P420-1879
W/Steam rating 150 PSI (WSP)
$120.00 USD
Full port hot forged brass ball valve, reinforced PTFE seats, blow-out proof stem, adjustable PTFE packing gland Maximum working pressure 450 PSI (CWP). Temperature rating:...
SKU:
S92M42
Vendor:
RuB inc.
Type:
Ball Valves
Availability:
In-Stock
$120.00 USD
BRAND: RuB inc.
ID: #P420-1844
W/Steam rating 150 PSI (WSP)
$502.00 USD
Full port hot forged brass ball valve, reinforced PTFE seats, blow-out proof stem, adjustable PTFE packing gland Maximum working pressure 450 PSI. (CWP) Temperature rating:...
SKU:
S92M43
Vendor:
RuB inc.
Type:
Ball Valves
Availability:
In-Stock
$502.00 USD
BRAND: RuB inc.
ID: #P420-1833
W/Steam rating 150 PSI (WSP)
$403.00 USD
Full port hot forged brass ball valve, reinforced PTFE seats, blow-out proof stem, adjustable PTFE packing gland Maximum working pressure 450 PSI (CWP). Temperature rating:...
SKU:
S92M45
Vendor:
RuB inc.
Type:
Ball Valves
Availability:
In-Stock
$403.00 USD
BRAND: RuB inc.
ID: #P420-1814
W/Steam rating 150 PSI (WSP)
$377.00 USD
Full port hot forged brass ball valve, reinforced PTFE seats, blow-out proof stem, adjustable PTFE packing gland. Maximum working pressure 450 PSI (CWP). Temperature rating:...
SKU:
S92M41
Vendor:
RuB inc.
Type:
Ball Valves
Availability:
In-Stock
$377.00 USD
BRAND: RuB inc.
ID: #P420-1803
$520.00 USD
Full port hot forged brass ball valve, blow-out proof stem, double FPM Stem sealing for low torque. Maximum working pressure 450 PSI (CWP). Temperature rating:...
SKU:
S95M43N
Vendor:
RuB inc.
Type:
Ball Valves
Availability:
In-Stock
$520.00 USD
BRAND: RuB inc.
ID: #P420-1792
$392.00 USD
Full port hot forged brass ball valve, blow-out proof stem, double FPM Stem sealing for low torque. Maximum working pressure 600 PSI (CWP). Temperature rating:...
SKU:
S95M45N
Vendor:
RuB inc.
Type:
Ball Valves
Availability:
In-Stock
$392.00 USD
BRAND: RuB inc.
ID: #P420-1772
$381.00 USD
Full port hot forged brass ball valve, blow-out proof stem, double FPM Stem sealing for low torque. Maximum working pressure 450 PSI (CWP). Temperature rating:...
SKU:
S95M41N
Vendor:
RuB inc.
Type:
Ball Valves
Availability:
In-Stock
$381.00 USD
BRAND: Rub inc.
ID: #P420-1730
$365.00 USD
Full port hot forged brass ball valve, blow-out proof stem, double FPM Stem sealing for low torque. Maximum working pressure 450 PSI (CWP). Temperature rating:...
SKU:
S95M45
Vendor:
Rub inc.
Type:
Ball Valves
Availability:
In-Stock
$365.00 USD
BRAND: Rub inc.
ID: #P420-1744
$484.50 USD
Full port hot forged brass ball valve, blow-out proof stem, double FPM Stem sealing for low torque. Maximum working pressure 450 PSI (CWP). Temperature rating:...
SKU:
S95M43
Vendor:
Rub inc.
Type:
Ball Valves
Availability:
In-Stock
$484.50 USD
BRAND: Rub inc.
ID: #P420-1709
Sold Out
Full port hot forged brass ball valve, blow-out proof stem, double FPM Stem sealing for low torque. Maximum working pressure 600 PSI (CWP) Temperature rating:...
SKU:
S95M46
Vendor:
Rub inc.
Type:
Ball Valves
Availability:
Out-Stock
Sold Out
BRAND: Rub inc.
ID: #P420-1719
$353.25 USD
Full port hot forged brass ball valve, blow-out proof stem, double FPM Stem sealing for low torque. Maximum working pressure 450 PSI (CWP). Temperature rating:...
SKU:
S95M41
Vendor:
Rub inc.
Type:
Ball Valves
Availability:
In-Stock
$353.25 USD
BRAND: Braso
ID: #P420-1508
$567.66 USD
Lead Free Brass Compression Female AdapterP420-1508 replaces the following industrial numbers: 20SSTH10M; 50M76; SC201Q;
SKU:
P420-1508
Vendor:
Braso
Type:
Valve
Availability:
In-Stock
$567.66 USD
Brass Full Port Ball Valve 400 WOG, P420-1454 replaces the following industrial numbers: 01728170Q ; 40024-48; 47865K72; 7481538389800; 759T10; BV2103-P; BV2103P; HP-Q104 3
SKU:
P420-1454
Vendor:
Supplyshop
Type:
Valve
Availability:
In-Stock
$277.54 USD
BRAND: Supplyshop
ID: #P420-1370
$463.01 USD
Lead Free Brass Full Port China Ball Valve, P420-1370
SKU:
P420-1370
Vendor:
Supplyshop
Type:
Valve
Availability:
In-Stock
$463.01 USD
Premium Valve Collection for Industrial Applications
Explore our exclusive collection of high-performance valves, designed for a wide range of industrial applications. Our valves are engineered for durability, precision, and efficiency, ensuring optimal flow control in various systems.
Key Features:
- Durability: Crafted from top-grade materials for long-lasting performance.
- Precision: Accurate flow control for improved operational efficiency.
- Versatility: Suitable for diverse industrial environments.
Types of Valves:
- Ball Valves: Ideal for on/off control with minimal pressure drop.
- Gate Valves: Perfect for regulating fluid flow in pipelines.
- Butterfly Valves: Efficient for throttling and flow regulation.
- Check Valves: Prevent backflow and ensure system integrity.
- Globe Valves: Designed for precise flow control and pressure regulation.
Why Choose Us?
- Quality Assurance: Each valve undergoes rigorous testing to meet industry standards.
- Innovative Designs: Continuous improvements for enhanced performance.
- Customer Support: Dedicated team available to assist with your needs.
Enhance your industrial operations with our reliable valve solutions. Contact us today to learn more about our products and services.