HVAC
Plumbing
Electric & Solar
Tools & Test Instruments
Tools
Categories
Price
Type List
- 4-Tool Cordless Combo Kit
- Absorbent Utility Pads
- Accelerator Rapid Evacuation Kit
- Access Quick Coupler
- Acme Adapter
- Adjustable Wrench
- Adjustable Wrench Set
- Air-Acetylene Hose
- Airflow Balancing Meter
- Aluminum Handled Combination Snips
- Aluminum Snips
- Andy Aluminum Handled Snips
- Assisted Crimper
- Automotive Refrigerant Side Can Tap
- Aviation Mini-Snip
- Aviation Snip
- Aviation Snips
- Aviation Snips with Green Grip
- Ball Valve
- Ball Valve Set
- Battery
- Battery Pack
- Bearing for Hole Cutter
- BiMetal Metal Saw Blades
- Bit Extension
- Bit Pouch
- Bit Set
- Black Fine Point Marker
- Blade for Sure Grip Tube Slicer
- Bulldog Snips
- Button Head Rivets
- Carbide Tipped Masonry Bit
- Channel Shear
- Charging Hose
- Charging Hose Set
- Charging Hoses
- Chuck Key
- Classic Aluminum Handled Combination Snips
- Clutch Driven Flaring Tool
- CO2 Cartridges
- CO2 Refill Cartridges
- CO2 Regulator
- CO2 to Nitrogen Adapter
- Coil Cleaning Machine
- Combination Cutting Snip
- Combination Pliers
- Combination Snip
- Compact Battery Pack
- Compact Organizer
- Compact Ultra Light Vinyl-Cutting Combination Snips
- Compound Leverage Stone Coated Steel Roofing Cutter
- Connext Kit with Ratcheting Handle
- Connext Magnetic Hex Driver
- Cooler
- Cordless Drill/Driver
- Cordless Hammer Drill/Driver
- Cordless Installation Drill/Driver Kit
- Cordless Lithium-Ion Copper Tubing Cutter Kit
- Cordless Screwdriver Kit
- Core Removal Tool
- Coupling Fitting
- Crate
- Crimper
- Curved Jaw Locking Pliers
- Cutter Bit
- Cutting Wheel for Tube Cutters
- Digital Torque Wrench
- Disconnect Switch
- Double Cutting TurboShear
- Double Gripping Power Grip Caulking Gun
- Double-Cut TurboShear Replacement Blade
- Drain Cone
- Drain Dawg
- Drain Gun
- Drain Kat
- Drain Line Flush Device
- Drill Bit
- Drill Bit Set
- Drill Clamp
- Drill Set
- Drip Edge Folding Tool
- Drive Bit
- Drive Shaft
- Dual Temperature Heat Gun
- Dual-Sided Reversible Hex Driver
- Duct Board Washer
- Duct Knife
- Duct Shear
- Duct Stretcher
- Duct Stretcher Replacement Wheel Kit
- Dust Masks
- EasyHood™ Airflow Capture Hood Kit
- Electrical Cutter/Stripper/Crimper Plier
- Electrical Wire Cutter/Stripper
- Equipment Tracker
- Eurocap Tamper Proof Cap
- Extended Capacity Battery Pack
- Extension Pole
- Face Mask
- Fiber Cement Angle Cutter
- Fiber Cement Mixed Gauge Set
- Fiber Cement Siding Facing Gauge
- Fiber Cement Siding Guillotine Shear
- Fiber Cement Siding Overlap Gauge
- Fin Comb
- Flaring Kit
- Flex Mini Split Adapter
- Flexible Duct Support
- Flip Utility Knife
- Foam Pig
- Foam Pig Kit
- Foamboard Staples
- Folding Jab Saw
- Folding Tool
- Folding Utility Knife
- Gas Test Gauge
- Gauge Boot
- Grinding Wheel
- Gutter Outlet Tool Frame
- Hacksaw Frame
- Hand Notcher
- Hand Seamer
- Hanging Strap
- Head Rivets
- Heavy Duty Replacement Blades
- Heavy Duty Trim Nail Punch
- Heavy-Duty Corded Swivel Head Shear
- Heavy-Duty Hammerdrill
- Hex Cordless Impact Driver
- Hex Cordless Impact Driver Kit
- Hex Driver
- Hex Driver®
- Hex Impact Driver Combo
- Hex Key Ratchet Wrench Insert
- Hex Key Set
- Hex Quick Change Adapter
- Hidden Nail Cutter
- High Carbon Steel Saw Blades for Wood
- High Side Gauge
- Hole Cutter
- Hole Saw
- Hose Depressor
- Hose Gasket
- HVAC Deluxe Starter Kit
- HVAC Starter Tool Kit
- Impact Magnetic Nut Driver
- Inspection Camera
- Inspection Camera Kit
- Internal Pipe Wrench
- Jobsite Fan
- Kobra Charging Hose
- Large Hole Saw Arbor
- Large Ratchet Tube Cutter
- Large Tool Box
- Lashing Strap
- Left Cut Vertica Aviation Snips
- Leg Kit for Portable Mini Brake
- Lightweight Aluminum Handled Snips
- Line Set Cleaner Tool Kit
- Liquid Charging Adapter
- Lithium-Ion 1/4" Hex Cordless Impact Driver
- Lithium-Ion Cordless Recip Saw Kit
- Lithium-Ion Work Light
- Lock Punch
- Locking Tradesman Knife
- Long Magnetic Hex Chuck Driver
- Low Side Gauge
- Low-Pressure
- Low-Profile Compact Organizer
- Low-Profile Organizer
- Machine Switch
- Magnetic Bit Holder
- Magnetic Gutter Screw Guide
- Magnetic Manifold Gauge Holder
- Magnetic Tape Measure
- Magnetic Umbrella
- MagneticHand Driver
- Manifold
- MAX Jaw
- MAX Jaw Kit
- MC-B Tank Adapter
- Metal Scribe
- Milled Variable/Standard Reciprocating BiMetal Wood Saw Blade
- Mini Brake
- Mini-Size Trim Nail Punch
- Mounting Flood Light
- Multi Key
- Multi-Purpose Fencing Pliers
- Needle and Gasket
- Nitrile Gloves
- Nitrogen Purge Tool
- Nut Driver
- Nylon Ties
- O-Ring Seal
- O-Rings
- Offset Crimper
- Organizer
- Paint Marker
- PEX to Wire Tool
- PEX Tubing Uncoiler In Case
- Phillips Chuck Driver Insert Bit
- Phillips Chuck Long Driver Insert Bit
- Phillips Insert Bit
- Piece Screw Extractor Kit
- Pilot Bit
- Pin Actuator
- Pin Set
- Pipe and Duct Holder
- Plastic Tube Slicer
- Pliers
- Plunger Actuator
- Pocket Brake
- Pocket Tool Backpack
- Point Break Away Blades
- Pre-Assembled Damper w/ Wing Nuts
- Press Tool
- PRO-SET® Metric Torque Wrench Set
- PRO-SET® SAE Torque Wrench Set
- Punch & Die Set
- Push Switch
- Quick Action Carbide Tipped Hole Saw
- Quick Change Pilot Drill
- Quick Release Arbor with Pilot Drill
- Quick-Change Magnetic Nut Driver
- R134A Manual Automotive Coupler
- R134A Snap-N-Seal Automotive Coupler
- Rasping Jab Saw
- Ratchet Strap
- Ratchet Wrench Insert
- Ratcheting Driver
- Recip Saw
- Reciprocating Blade
- Reciprocating Saw
- RedLine Ceiling Grid Punch
- RedLine Downspout Crimper
- RedLine Fiber Cement Siding Snip
- RedLine Hand Seamer
- RedLine Hole Punch
- RedLine J-Channel Cutter
- RedLine Nail Hole Slot Punch
- RedLine Punch Lock Stud Crimper
- RedLine Snap Lock Punch
- Refrigeration Ratchet Wrench
- Replacement Blade
- Replacement Blade & 2 Spacers for SRC24A Channel Shear
- Replacement Blade for Stone Coated Steel Roofing Cutter
- Replacement Blade Set
- Replacement Blades
- Replacement Blades for MC14A Combination Snips
- Replacement Blades for Tin Snips
- Replacement Cutter Bit for HC1 & HC2
- Replacement Drill
- Replacement Gasket
- Replacement Gauge
- Replacement Lens
- Replacement Shoe for Hole Cutte
- Replacement Spring
- Replacement Thrust Bearing for Hole Cutter
- Right Angle Drill Attachment
- Right Cut Vertical Aviation Snips
- Ring Jaw
- Rolling Tool Box
- Safety Drop Cloth
- Scratch Awl
- Screwdriver
- Screwdriver Key
- Secure Seal
- Secure Seal Fitting
- Secure Seal Fitting Straight
- Setting Hammer
- Shaft Blaster
- Shaft Blaster Discs
- Sheet Metal Hammer
- Sheet Metal Screws
- Shockwave Adapter
- Shockwave Hex Nut Driver Bit
- Shockwave Phillips Bit
- Shoe Covers
- Short Magnetic Hex Chuck Driver
- Shut-Off Stem
- Side Can Tap
- Slide Valve Core Removal Tool
- SmartAir™ Meter
- SmartClips for SM1 Stapler
- SmartTool Stapler
- Snap Lock Punch
- Spring for Sheet Metal Tools
- Square Combination
- Square Head Chuck Driver Insert Bit
- Standard Rectangular Hole Gutter Outlet Die
- Staple Gun
- Staples
- Starter Tool Kit
- Station Edge Roller
- Steel Cutting Circular Saw Blade
- Straight Aluminum Snips
- Straight Double Cut Aviation Snips
- Straight Edge Ruler
- Straight Fitting
- Straight Jaw Locking Pliers
- Straight-Jaw Plier
- Stretch Straps
- Style Hole Gutter Outlet Die
- Super Heat Calculation Tool
- Supercomb
- Swaging Kit
- T-Hex Key
- Tamper Proof Cap
- Tank Tote
- Tape Measure
- Tapered Broach
- TempSmart Data Logger
- TempSmart Wireless Data Logger Kit
- Tensioning Tool
- Tensioning Tools with Manual Cut Off Tie Tool
- Termination Fitting
- Test Instrument
- Tinner's Circumference Ruler
- Tool
- Tool Box
- Tool Case with Foam Insert
- Torch Shield
- Trammel Point
- Trim Nail Punch with Retaining Clip
- Truck Rope
- Tube Cutters
- TurboCrimper®
- TurboShear
- TurboShear - Corrugated Metal Attachment
- TurboShear Heavy-Duty
- TurboShear Slate - Cutting Drill Attachment
- Turn Anti-Blowback Adaptor
- Universal Flex Duct Knife Sheath
- Universal Screwdriver Key
- Utility Blades 5PK
- Utility Knife
- Utility Lift
- Vacuum Gauge
- Vacuum Pump
- Vacuum Pump Oil
- Valve Core Removal Tool
- VaporVue Charging Device
- Velocity Rapid Evacuation Kit
- Vent Saw Replacement Drill Bit
- Viega MegaPress Fittings
- Vinyl Fence Rail Notcher
- Wireless Airflow Balancing and Environmental Meter
- Wireless Dual Input Manometer
- Wireless Dual Input Manometer Kit
- Wireless P/T Gauge
- Wiring Harness Connector
- Wood Staple
- Wood Vent Saw
- Wood/Foamboard Stapler
Items 1 to 100 of 938 total
MASTERJ's 1-50, 2-30 NAO will accommodate up to (1) 50lb. cylinder, (3) 30lb. cylinders, (1) Nitrogen or B-Tank, (1) Acetylene & (1) Oxygen tank.
SKU:
TH150230NAO
Vendor:
MASTERJ
Type:
Availability:
In-Stock
$275.00 USD
Uses a pressurized source to launch a foam puck into the line set to wipe the pipe clean of contaminants and remaining refrigerants Simply connect...
SKU:
HLP099
Vendor:
hilmor
Type:
Foam Pig Kit
Availability:
Out-Stock
$19.00 USD
Uses a pressurized source to launch a foam puck into the line set to wipe the pipe clean of contaminants and remaining refrigerants Simply connect...
SKU:
HLP038
Vendor:
hilmor
Type:
Foam Pig
Availability:
Out-Stock
$24.00 USD
MASTERJ's 3-30 NAO will accommodate up to (3) 30lb. cylinders, (1) Nitrogen or B-Tank, (1) Acetylene & (1) Oxygen tank.
SKU:
TH330NAO
Vendor:
MASTERJ
Type:
Availability:
In-Stock
$265.00 USD
Extra sharp, precision broached teeth for superior gripping power Jaws forged from premium grade US steel for increased strength and long-life Large adjustment knob and...
SKU:
LP10WC
Vendor:
Malco
Type:
Curved Jaw Locking Pliers
Availability:
Out-Stock
Sold Out
BRAND: Malco
ID: #E200-2SH9-0171
Sold Out
Replacement Blade & 2 Spacers for SRC24A Channel Shear
SKU:
10627
Vendor:
Malco
Type:
Replacement Blade & 2 Spacers for SRC24A Channel Shear
Availability:
Out-Stock
Sold Out
BRAND: JB
ID: #JB100-1S9-0062
Available in 2-4 days
$123.20 USD
Designed to remove and replace valve cores without losing system charge Convenient slide valve side port to accommodate a vacuum gauge In-line actuated handle for...
SKU:
A32525SV
Vendor:
JB
Type:
Slide Valve Core Removal Tool
Availability:
In-Stock
$123.20 USD
BRAND: Yellow Jacket
ID: #TYJ100-1S9-1006
Available in 2-4 days
$12.84 USD
For use with Yellow Jacket gauges
SKU:
49100
Vendor:
Yellow Jacket
Type:
Tool
Availability:
In-Stock
$12.84 USD
MASTERJ's TH430 is an ideal refrigerant rack for standard size vans. The rack can be mounted both vertical and horizontal.TH430 will accommodate (4) 30lb cylinders.
SKU:
TH430
Vendor:
MASTERJ
Type:
Availability:
In-Stock
$320.00 USD
MASTERJ's TH330 is an ideal refrigerant rack for standard size vans. The rack can be mounted both vertical and horizontal.TH330 will accommodate up to (3)...
SKU:
TH330
Vendor:
MASTERJ
Type:
Availability:
In-Stock
$260.00 USD
Extra sharp, precision broached teeth for superior gripping power Jaws forged from premium grade US steel for increased strength and long-life Large adjustment knob and...
SKU:
LP7WC
Vendor:
Malco
Type:
Curved Jaw Locking Pliers
Availability:
Out-Stock
Sold Out
Extra sharp, precision broached teeth for superior gripping power Jaws forged from premium grade US steel for increased strength and long-life Large adjustment knob and...
SKU:
LP10R
Vendor:
Malco
Type:
Straight Jaw Locking Pliers
Availability:
Out-Stock
Sold Out
Features: A narrower grip opening accommodates large or small hands without sacrificing generous Max2000 cutting length. All-new, ambidextrous, one-hand-operation metal latch is accessible from top...
SKU:
M2004
Vendor:
Malco
Type:
Straight Double Cut Aviation Snips
Availability:
Out-Stock
Sold Out
BRAND: White-Rodgers
ID: #WR100-2MP9-0021
$17.25 USD
Manifold Valve Wiring Harness Connector
Type Wiring Harness Connector
Used On 3600 HIS System Manifold Valve
Size 36 Inch
Lead Length 24 Inch
SKU:
F115-0087
Vendor:
White-Rodgers
Type:
Wiring Harness Connector
Availability:
In-Stock
$17.25 USD
BRAND: Milwaukee
ID: #MIL100-1S9-0118
Available in 2-4 Days
$1,327.02 USD
Perform visual inspections in hard-to-reach areas 270 degree camera head motion 3.5" wireless LCD screen LED for illuminating dark spaces 3-foot cable length Includes M12...
SKU:
2317-21
Vendor:
Milwaukee
Type:
Inspection Camera
Availability:
In-Stock
$1,327.02 USD
BRAND: Milwaukee
ID: #MIL100-1S9-0106
Available in 2-4 Days
$52.02 USD
Part of the PACKOUT™ modular storage system 5 removable and mountable bins No-travel bins seal prevent small part migration between bins Constructed with impact resistant...
SKU:
48-22-8435
Vendor:
Milwaukee
Type:
Compact Organizer
Availability:
In-Stock
$52.02 USD
BRAND: Milwaukee
ID: #MIL100-1S9-0101
Available in 2-4 Days
Sold Out
Expand holes in drywall up to 2 times faster
Rubber over mold grip for comfort
6" blade length
SKU:
48-22-0104
Vendor:
Milwaukee
Type:
Rasping Jab Saw
Availability:
Out-Stock
Sold Out
BRAND: Milwaukee
ID: #MIL100-1S9-0028
Available in 2-4 Days
$249.90 USD
Brushless motor
4-mode drive control
5" length and 2 pounds
Tri-LED illuminates work area
Includes 2 batteries, charger, belt clip and carrying case
SKU:
3453-22
Vendor:
Milwaukee
Type:
Hex Cordless Impact Driver Kit
Availability:
In-Stock
$249.90 USD
Locking caps work for all refrigerant tanks and service ports IRC and IMC compliant Helps eliminate theft, vandalism, inhaling opportunities and accidental mixing of costly...
SKU:
86692
Vendor:
Rectorseal
Type:
Tamper Proof Cap
Availability:
In-Stock
$15.10 USD
Compact and portable design for logging temperature and humidity Measures dry bulb, wet bulb, temperature and relative humidity Stores date and readings for up to...
SKU:
TS-100
Vendor:
CPS
Type:
TempSmart Data Logger
Availability:
In-Stock
$114.00 USD
Safety turned and chamfered heads
Exclusive bell-chamfer to meet recognized aluminum tube soldering practice
Brite-plated, heat treated hex steel
SKU:
T21005
Vendor:
JB
Type:
Tube Cutters
Availability:
Out-Stock
Sold Out
Kit consists of drain valve, rubber foot and screw assembly (2), motor foot and screw, flexible shaft coupler and sight glass
SKU:
PR-45
Vendor:
JB
Type:
Vacuum Pump
Availability:
Out-Stock
Sold Out
For use with JB Zeppelin and M2 Series 2-Valve Manifolds
SKU:
P90022
Vendor:
JB
Type:
O-Ring Seal
Availability:
In-Stock
$16.50 USD
Rated for 750 PSI working pressure and 3,000 burst pressure
Not compatible with R410A
SKU:
CL-36Y
Vendor:
JB
Type:
Charging Hose
Availability:
Out-Stock
Sold Out
UL recognized low loss fitting
Rated for 800 PSI working pressure and 4,000 burst pressure
Approved for R410A
60" length
SKU:
CCLS-60
Vendor:
JB
Type:
Charging Hose Set
Availability:
In-Stock
$181.50 USD
BRAND: Supco
ID: #S150-1S9-0046
Available in 2-4 days
$87.98 USD
Stay in the shade on scorching rooftops, and keep tools dry during rainy repairs Waterproof 60" umbrella with durable and flexible fiberglass ribs Base Swivels...
SKU:
MUBASE
Vendor:
Supco
Type:
Magnetic Umbrella
Availability:
In-Stock
$87.98 USD
Features rounded scoring edge to cut fiberboard without tearing fiberboard skin
SKU:
FGK
Vendor:
Malco
Type:
Replacement Blades
Availability:
Out-Stock
Sold Out
Scribes lines on sheet metal, plastic and a variety of other materials 1/4" x 4" blade is tapered and can be resharpened many times Handle...
SKU:
A20
Vendor:
Malco
Type:
Scratch Awl
Availability:
Out-Stock
Sold Out
Use with power drills or Connext quick change handles Hex drivers are color coded for easy size identification 1/4" power insert shanks
SKU:
SH3
Vendor:
Malco
Type:
Setting Hammer
Availability:
Out-Stock
Sold Out
Crimps 24 to 30 gauge galvanized round duct, including spiral duct 5 times faster than hand crimpers Requires 12V (minimum) cordless or 7A (maximum) corded...
SKU:
C5A2
Vendor:
Malco
Type:
TurboCrimper®
Availability:
Out-Stock
Sold Out
SPDT, screw terminals, 1" H, 12.3 oz. operating force Replaces Micro #BA-2R-A2, Arrow Hart #HD3-Z2 and Unimax #2HL-5 Used on conveyors, packaging machinery, security alarms,...
SKU:
E47CMS01-JS
Vendor:
Eaton
Type:
Pin Actuator
Availability:
Out-Stock
Sold Out
Rotate blade for fast deburring
SKU:
60165
Vendor:
Yellow Jacket
Type:
Tool
Availability:
Out-Stock
Sold Out
For 1/4", 5/16" and 3/8" tubing
Stationary hook holds tubing securely while bending
Calibrated markings for bends up to 180°
SKU:
60390
Vendor:
Yellow Jacket
Type:
Tool
Availability:
In-Stock
$65.27 USD
PLUS II™ environmentally responsible, permeation resistant hose Compatible with current CFC, HCFC and HFC refrigerants and oils Rated for 800 PSI working pressure, 4,000 PSI...
SKU:
60440
Vendor:
Yellow Jacket
Type:
Tool
Availability:
In-Stock
$234.33 USD
Combination lead double thread design Single starting thread machined down to very tip of screw point Instantly penetrates and engages in heavy gauge sheet metal...
SKU:
PO8X2ZWT
Vendor:
Malco
Type:
Sheet Metal Screws
Availability:
Out-Stock
Sold Out
Reversible 7 mm and 8 mm hex sizes
7 mm hex allows access in tight areas
Easy-clean magnet
One-piece driver strength and durability
SKU:
MSHXLCM3
Vendor:
Malco
Type:
Dual-Sided Reversible Hex Driver
Availability:
Out-Stock
Sold Out
Reversible 7 mm and 8 mm hex sizes
7 mm hex allows access in tight areas
Easy-clean magnet
One-piece driver strength and durability
SKU:
MSHMLCM3
Vendor:
Malco
Type:
Dual-Sided Reversible Hex Driver
Availability:
Out-Stock
Sold Out
Reversible 7 mm and 8 mm hex sizes
7 mm hex allows access in tight areas
Easy-clean magnet
One-piece driver strength and durability
SKU:
MSHCM3
Vendor:
Malco
Type:
Dual-Sided Reversible Hex Driver
Availability:
Out-Stock
Sold Out
Hardened alloy steel blades offer maximum cutting life Latch is accessible from left, right or top Fast adjusting, long life pivot bolt Easy replacement of...
SKU:
M2007
Vendor:
Malco
Type:
Aviation Snips
Availability:
Out-Stock
Sold Out
For straight shearing, mild curve cuts and multiple layers of material
Strong lightweight aluminum frame
Long life inlaid steel blades
SKU:
M14A
Vendor:
Malco
Type:
Straight Aluminum Snips
Availability:
Out-Stock
Sold Out
For straight shearing, mild curve cuts and multiple layers of material
Strong lightweight aluminum frame
Long life inlaid steel blades
SKU:
M12A
Vendor:
Malco
Type:
Straight Aluminum Snips
Availability:
Out-Stock
Sold Out
Extra sharp, precision broached teeth for superior gripping power Jaws forged from premium grade US steel for increased strength and long-life Large adjustment knob and...
SKU:
LP7R
Vendor:
Malco
Type:
Straight Jaw Locking Pliers
Availability:
Out-Stock
Sold Out
Combination lead double thread design Single starting thread machined down to very tip of screw point Instantly penetrates and engages in heavy gauge sheet metal...
SKU:
HW8X3ZWT
Vendor:
Malco
Type:
Sheet Metal Screws
Availability:
Out-Stock
Sold Out
Combination lead double thread design Single starting thread machined down to very tip of screw point Instantly penetrates and engages in heavy gauge sheet metal...
SKU:
HW8X3/4Z
Vendor:
Malco
Type:
Sheet Metal Screws
Availability:
Out-Stock
Sold Out
Combination lead double thread design Single starting thread machined down to very tip of screw point Instantly penetrates and engages in heavy gauge sheet metal...
SKU:
HW8X2Z
Vendor:
Malco
Type:
Sheet Metal Screws
Availability:
Out-Stock
Sold Out
Combination lead double thread design Single starting thread machined down to very tip of screw point Instantly penetrates and engages in heavy gauge sheet metal...
SKU:
HW8X1Z
Vendor:
Malco
Type:
Sheet Metal Screws
Availability:
Out-Stock
Sold Out
Combination lead double thread design Single starting thread machined down to very tip of screw point Instantly penetrates and engages in heavy gauge sheet metal...
SKU:
HW7X1/2Z
Vendor:
Malco
Type:
Sheet Metal Screws
Availability:
Out-Stock
Sold Out
Combination lead double thread design Single starting thread machined down to very tip of screw point Instantly penetrates and engages in heavy gauge sheet metal...
SKU:
HW10X1/2ZT
Vendor:
Malco
Type:
Sheet Metal Screws
Availability:
Out-Stock
Sold Out
WARRANTY - Johnstone Supply will administer and promptly process all warranties in accordance with the manufacturer's specific warranty policies and procedures. WHOLESALE ONLY - Identification...
SKU:
CONNEXT2
Vendor:
Malco
Type:
MagneticHand Driver
Availability:
Out-Stock
Sold Out
BRAND: Malco
ID: #E200-1S9-0382
Sold Out
WARRANTY - Johnstone Supply will administer and promptly process all warranties in accordance with the manufacturer's specific warranty policies and procedures. WHOLESALE ONLY - Identification...
SKU:
CONNEXT1
Vendor:
Malco
Type:
MagneticHand Driver
Availability:
Out-Stock
Sold Out
Drills its own hole and taps a matching thread in less time than it takes to drill a pilot hole for other standard fasteners Produces...
SKU:
BT144T
Vendor:
Malco
Type:
Sheet Metal Screws
Availability:
Out-Stock
Sold Out
Drills its own hole and taps a matching thread in less time than it takes to drill a pilot hole for other standard fasteners Produces...
SKU:
BT141T
Vendor:
Malco
Type:
Sheet Metal Screws
Availability:
Out-Stock
Sold Out
BRAND: Malco
ID: #E200-1S9-0378
Sold Out
Combination lead double thread design Single starting thread machined down to very tip of screw point Instantly penetrates and engages in heavy gauge sheet metal...
SKU:
HW8X1/2Z
Vendor:
Malco
Type:
Sheet Metal Screws
Availability:
Out-Stock
Sold Out
Make or remake clean locking tabs in vinyl pickets and rails on the job. Compound leverage produces 7 to 1 mechanical advantage. Ergonomic Redline Handles...
SKU:
VFN2
Vendor:
Malco
Type:
Vinyl Fence Rail Notcher
Availability:
Out-Stock
Sold Out
Available in 19 sizes to get any number of jobs done fast! Aggressive carbide tipped teeth with deep self-cleaning gullets easily cut thick or layered...
SKU:
HF15
Vendor:
Malco
Type:
Quick Action Carbide Tipped Hole Saw
Availability:
Out-Stock
Sold Out
BRAND: Malco
ID: #E200-2SH9-0021
Sold Out
Malco’s Fiberglass Duct Board Washers help to reinforce sheet metal components to fiberglass duct. Use with #8 screw for fastening components.Features: For use with wire-reinforced...
SKU:
RW732
Vendor:
Malco
Type:
Duct Board Washer
Availability:
Out-Stock
Sold Out
Easily organize, protect and safely transport your valuable tools-of-the-trade with a job-site-quality, 33-pocket tool backpack. Durable construction offers long service life and features a dense,...
SKU:
TBP33
Vendor:
Malco
Type:
Pocket Tool Backpack
Availability:
Out-Stock
Sold Out
Power drive 1/4-inch hex shank fits any electric power drill or 1/4-inch power drive holder. Accepts 1/4-inch hex shank insert bits.
SKU:
MBH14
Vendor:
Malco
Type:
Magnetic Bit Holder
Availability:
Out-Stock
Sold Out
Features: For use with Type "A" hex head screws and Malco's Zip-In screws Hex opening of a 5/16 inch Magnetic nose keeps fastener in place...
SKU:
HHD2S
Vendor:
Malco
Type:
Connext Magnetic Hex Driver
Availability:
Out-Stock
Sold Out
BRAND: Malco
ID: #E200-2SH9-0026
Sold Out
Malco precision fit and hardened Magnetic Hex Chuck Drivers, with 1/4-inch power insert shanks, meet on-the-job demands for performance and service life whether installed on...
SKU:
MSH38P
Vendor:
Malco
Type:
Short Magnetic Hex Chuck Driver
Availability:
Out-Stock
Sold Out
Make your drill a double-cut metal shear. Now you can get double-cut performance in a Versatile Malco TurboShear. The versatile model TSMD TurboShear Drill Attachment...
SKU:
TSMD
Vendor:
Malco
Type:
Double Cutting TurboShear
Availability:
Out-Stock
Sold Out
All Malco Gutter Outlet Punch and Dies make clean, accurate hole cuts in .032” (0.81 mm) aluminum gutter. Ample throat clearance allows these lightweight outlet...
SKU:
GOT
Vendor:
Malco
Type:
Gutter Outlet Tool Frame
Availability:
Out-Stock
Sold Out
BRAND: Malco
ID: #E200-2SH9-0029
Sold Out
1/4" (6.4 mm) bearings allow bearing holes to be made in round duct with the use of a scratch awl. Squeeze pipe so that it...
SKU:
D6AST
Vendor:
Malco
Type:
Pre-Assembled Damper w/ Wing Nuts
Availability:
Out-Stock
Sold Out
POWER-FIT™ Performance Hand Grips naturally distribute pressure evenly across your hand resulting in a more natural feel and less fatigue. Ergonomic hand guards allow users...
SKU:
AV3
Vendor:
Malco
Type:
Aviation Snips
Availability:
Out-Stock
Sold Out
Features: For use with Type "A" hex head screws and Malco's Zip-In screws Hex opening of a 1/4 inch Magnetic nose keeps fastener in place...
SKU:
HHD3T
Vendor:
Malco
Type:
Connext Magnetic Hex Driver
Availability:
Out-Stock
Sold Out
BRAND: Malco
ID: #E200-2SH9-0032
Sold Out
A quick change CT, carbide tipped pilot drill with a tight, gripping hex shank.Features: Quick change pilot drill Carbide tipped Overall length is 7-3/4 in....
SKU:
HH5
Vendor:
Malco
Type:
Quick Change Pilot Drill
Availability:
Out-Stock
Sold Out
BRAND: Malco
ID: #E200-2SH9-0033
Sold Out
Description – A Full line selection of Reciprocating Saw Blades FEATURING: SUPER SHARP and TOUGH BiMetal By Malco, used for metal sheet, pipe, profiles under...
SKU:
4MC24
Vendor:
Malco
Type:
BiMetal Metal Saw Blades
Availability:
Out-Stock
Sold Out
Description – Use Malco Nylon Ties to install flexible duct to take-offs, or secure bundles, up to 15" (38 cm) diameter. Made of 100% nylon,...
SKU:
TY34
Vendor:
Malco
Type:
Nylon Ties
Availability:
Out-Stock
Sold Out
BRAND: Malco
ID: #E200-2SH9-0035
Sold Out
Description – A Full line selection of Reciprocating Saw Blades FEATURING: SUPER SHARP and TOUGH BiMetal By Malco.THEY STACK UP BETTER: For wood with nails,...
SKU:
4KH7
Vendor:
Malco
Type:
High Carbon Steel Saw Blades for Wood
Availability:
Out-Stock
Sold Out
POWER-FIT™ Performance Hand Grips naturally distribute pressure evenly across your hand resulting in a more natural feel and less fatigue. Ergonomic hand guards allow users...
SKU:
AV2
Vendor:
Malco
Type:
Aviation Snips
Availability:
Out-Stock
Sold Out
With an overall length of only 7-1/8 inches (181 mm), the AVsMini easily goes to work in tight or awkward spaces where full-size aviation snips...
SKU:
AVM6-EV
Vendor:
Malco
Type:
Aviation Mini-Snip
Availability:
Out-Stock
Sold Out
BRAND: Malco
ID: #E200-2SH9-0038
Sold Out
–
5/16" Ratchet Wrench Insert, 1-5/8" Long (Pack of 2)
SKU:
RRW516P
Vendor:
Malco
Type:
Ratchet Wrench Insert
Availability:
Out-Stock
Sold Out
BRAND: Malco
ID: #E200-2SH9-0039
Sold Out
A unique thread design and quality controlled manufacture spell the Zip-In difference. Zip-In's sophisticated heat treat process allows the screw to taper to a fine,...
SKU:
HW8X3/4ZP
Vendor:
Malco
Type:
Sheet Metal Screws
Availability:
Out-Stock
Sold Out
Available in 19 sizes to get any number of jobs done fast! Aggressive carbide tipped teeth with deep self-cleaning gullets easily cut thick or layered...
SKU:
HF16
Vendor:
Malco
Type:
Quick Action Carbide Tipped Hole Saw
Availability:
Out-Stock
Sold Out
BRAND: Malco
ID: #E200-2SH9-0041
Sold Out
For installing or servicing heating, air conditioning or refrigeration units. Facilitates easy ratcheting action for servicing hard to access valves common in air condition and...
SKU:
RRW3
Vendor:
Malco
Type:
Refrigeration Ratchet Wrench
Availability:
Out-Stock
Sold Out
BRAND: Malco
ID: #E200-2SH9-00642
Sold Out
Style: No. 8 Head Size: 1/4" Length: 3/4" Quantity: 5,000 Package Type: Pail Single starting thread machined down to very tip of screw point. Instantly...
SKU:
HW8X11/2ZT
Vendor:
Malco
Type:
Sheet Metal Screws
Availability:
Out-Stock
Sold Out
Impact-grade 6-inch Power Drive with 4-1/2" anodized aluminum sleeve provides extra reach without marring gutter Holds and guides 1/4" hex head screws up to 2...
SKU:
GSG6
Vendor:
Malco
Type:
Magnetic Gutter Screw Guide
Availability:
Out-Stock
Sold Out
Lightweight shear head for easy one-hand control and a telescoping clamp that fits large or small drill housings.Now turn your power drill into a "Fiber...
SKU:
TSF1
Vendor:
Malco
Type:
TurboShear
Availability:
Out-Stock
Sold Out
Maneuverable compact length.
Sharply defined cut.
Comfortably fits any size hand.
Spring-actuated, handles will not collapse.
Self-opening latch will not accidentally catch or close.
SKU:
AVM7-EV
Vendor:
Malco
Type:
Aviation Mini-Snip
Availability:
Out-Stock
Sold Out
The Malco 48Ar is a 48" Aluminum Rule. This 48" aluminum straight-edge ruler is desined with a .125 thickness extruded aluminum construction, and large, clear,...
SKU:
48A
Vendor:
Malco
Type:
Straight Edge Ruler
Availability:
Out-Stock
Sold Out
BRAND: Malco
ID: #E200-2SH9-0047
Sold Out
Head Size: 1/4" Length: 1" Number: 8 Quantity: 500 Package Type: Tub Undercut-indented hex washer slotted head Bright Zinc Plated Burr Fee Full 1/4" (no...
SKU:
HW8X1ZT
Vendor:
Malco
Type:
Sheet Metal Screws
Availability:
Out-Stock
Sold Out
Machined head has self aligning zinc drawbolt for easy blade installation Satin finish steel blades are precision stamped in eighths and sixteenths on each side...
SKU:
SCS12
Vendor:
Malco
Type:
Square Combination
Availability:
Out-Stock
Sold Out
BRAND: Malco
ID: #E200-2SH9-0049
Sold Out
Head Size: 1/4" Length: 2" Number: 8 Quantity: 250 Package Type: Tub Single starting thread machined down to very tip of screw point Instantly penetrates...
SKU:
HW8X2ZT
Vendor:
Malco
Type:
Sheet Metal Screws
Availability:
Out-Stock
Sold Out
Lightweight shear head for easy one-hand control.Telescoping Clamp fits large or small drill housing.Make your power drill a powerful slate-cutting shear! The Malco Turboshear Model...
SKU:
TSNS1
Vendor:
Malco
Type:
TurboShear Slate - Cutting Drill Attachment
Availability:
Out-Stock
Sold Out
Lightweight shear head for easy one-hand control.Telescoping Clamp fits large or small drill housing.Cuts 1/2" (13 mm) BackerboardFast straight cuts and arcs with less dust....
SKU:
TSF2
Vendor:
Malco
Type:
TurboShear
Availability:
Out-Stock
Sold Out
Availability:
Out-Stock
Sold Out
SKU:
M14NRB
Vendor:
Malco
Type:
Replacement Blades for Tin Snips
Availability:
Out-Stock
Sold Out
BRAND: Malco
ID: #E200-2SH9-0054
Sold Out
M12A for pattern, straight shearing, mild curve cuts, and multiple layers of material. MC12A for combination cuts left or right and straight cuts. Sleek styling,...
SKU:
M14ARB
Vendor:
Malco
Type:
Replacement Blade Set
Availability:
Out-Stock
Sold Out
BRAND: Malco
ID: #E200-2SH9-0055
Sold Out
HSS - high speed steel quick change pilot drill Use with Malco quick connect arbor part number HA3 to eject saw plugs with ease Overall...
SKU:
HH4
Vendor:
Malco
Type:
Quick Change Pilot Drill
Availability:
Out-Stock
Sold Out
Snap lock plastic skirting and siding to finishing trim. Makes tabs in the cut edge of siding panel used as a finishing course at top...
SKU:
SL5
Vendor:
Malco
Type:
Snap Lock Punch
Availability:
Out-Stock
Sold Out
Trouble FREE tool operation and secure clip connection Easy-loading magazine with 25 clip capacity won't slow you down 12-gauge (2.5 mm) steel clips will not...
SKU:
PT1
Vendor:
Malco
Type:
PEX to Wire Tool
Availability:
Out-Stock
Sold Out
Produces cuts in ABS, PVC, rubber and fabric reinforced hose up to 1" (25.4 mm) I.D. Rigid, durable nylon handle design provides sufficient leverage when...
SKU:
TC400
Vendor:
Malco
Type:
Plastic Tube Slicer
Availability:
Out-Stock
Sold Out
Fits 3/8-inch (10 mm) or larger electric power drills Holder accepts 1/4-inch hex shank chuck drivers and bits Chuck drivers and bits can be inserted...
SKU:
HAD1
Vendor:
Malco
Type:
Hex Quick Change Adapter
Availability:
Out-Stock
Sold Out
BRAND: Malco
ID: #E200-2SH9-0060
Sold Out
A Full line selection of Reciprocating Saw Blades FEATURING: SUPER SHARP and TOUGH BiMetal By Malco, used for rough-in, mild contours in wood with nails.THEY...
SKU:
4KH6
Vendor:
Malco
Type:
Milled Variable/Standard Reciprocating BiMetal Wood Saw Blade
Availability:
Out-Stock
Sold Out
BRAND: Malco
ID: #E200-2SH9-0061
Sold Out
Head Size: 1/4" Number: 8 Length: 1-1/2" Color: White Quantity: 250 Package Type: Tub Undercut-indented hex washer slotted head White Painted Burr Fee Full 1/4"...
SKU:
HW8X11/2ZWT
Vendor:
Malco
Type:
Sheet Metal Screws
Availability:
Out-Stock
Sold Out
Trim Nail Punch with Retaining Clip for easier nailing from any angle or height, Malco offers a Trim Nail Punch with an exclusive, “nail retaining...
SKU:
TNP2R
Vendor:
Malco
Type:
Trim Nail Punch with Retaining Clip
Availability:
Out-Stock
Sold Out
Heavy Duty Trim Nail Punches drive trim nails into soffit, fascia and other finishing trim without denting or marring material. All-steel nose and aluminum tail...
SKU:
TNP2S
Vendor:
Malco
Type:
Heavy Duty Trim Nail Punch
Availability:
Out-Stock
Sold Out
Durable, reliable, built rugid
Top quality products that work hard
Enhanced performance for the trade professional
SKU:
HSRD
Vendor:
Malco
Type:
Vent Saw Replacement Drill Bit
Availability:
Out-Stock
Sold Out
Bolt Capacities: 4-40, 5-40, 6-32 Cutting Capacities: 8-32, 10-32, 10-24 Crimping: 22-10 ga. Stripping: 22-10 ga. O/A Length: 8 1/4" Weight: 8 oz. (227 g.)...
SKU:
WSC8
Vendor:
Malco
Type:
Electrical Cutter/Stripper/Crimper Plier
Availability:
Out-Stock
Sold Out
No distortion or compression
Straight square cuts
SKU:
FCC4
Vendor:
Malco
Type:
Fiber Cement Siding Guillotine Shear
Availability:
Out-Stock
Sold Out
Shop Tools at SupplyShop
Find tools and test instruments for HVAC, refrigeration, plumbing, electrical, and field-service work. Browse options such as Foam Pig Kit, Foam Pig, Drain Kat, Curved Jaw Locking Pliers. Compare brands such as MASTERJ, hilmor, Diversitech, Malco when a direct replacement or approved brand matters.
How to choose tools and test instruments
- Match the product page details to the equipment nameplate, project plan, or replacement part requirements.
- Compare measurement range, connection size, power source, replacement parts, calibration needs, and job-site durability where they apply.
- Use product photos, manuals, model numbers, and SKU details to confirm the selection before checkout.
Before you order
Review availability, freight or parcel shipping needs, return eligibility, and installation requirements before checkout. If the job depends on exact fit, have the model number, measurements, photos, or replacement requirements ready before contacting SupplyShop.