Kold Locker Walk-In Cooler - Indoor, 6 ft. x 8 ft. With Floor

Kold Locker™ walk-ins are built of modular panels, and are insulated with foamed-in-place EPA-compliant polyurethane insulation. Each panel is designed to ensure ease of installation, long term reliability and high insulating efficiency.

A. All panels are manufactured with male and female mating rails to ensure proper alignment during installation. The polyurethane insulation wraps around the return bend metal seams on both section to create a lightweight panel of exceptional strength and durability. All panels are a full four (4) inches thick and provide a superior insulating value.
B. The foamed-in-place cam locking fasteners ensure an airtight seal for maximum energy efficiency.
C. Kold Locker™ panel gaskets located around the outer perimeter of the panel are continuous, without cuts or breaks at corners. The Nor-Lake patented gasket design provides a foamed-in-place gasket as an integral part of the panel. Gaskets cannot fall off or pull off during shipment or installation.
D. Panels lock together tightly to assure an energy efficient walk-in.
E. Edge caps for ends of floor and ceiling panels are foamedin-place rather than overlapped or mechanically fastened. Edge caps cannot come loose, and they stay in place through the life of the walk-in.
F. Panel Finishes: Interior and exterior panels are fabricated with 26 gauge corrosion resistant stucco embossed coated steel. Models supplied with a floor will include a smooth aluminum interior floor surface.
G. Insulation: Panels are four (4) inches thick, metal clad and foamed-in-place with HFO polyurethane insulation which is HFC free. The R-values for 4" HFO panels are:

Cooler:

• Walls/Ceilings R-value 25
• Doors R-value 25

Freezer:

• Walls/Ceilings R-value 32
• Doors R-value 32
• Floors R-value 28

STANDARD FEATURES:

• STANDARD MODELS SHIP THE SAME DAY*
• Cooler or freezer models
• Sizes from 4' x 6' to 10' x 14'
• Three heights: 6'7" & 7'7" with floor; 7'4" floorless
• Indoor or outdoor models
• Two temperatures: +35°F, -10°F
• Capsule Pak™ refrigeration system (ceiling or wall mount) (ordered separately)
• Air-cooled condensing unit (wall mount – 10 day ship)
• Automatic condensate vaporizer. No drain line required on indoor units.**
• Time clock or electronic control provided for automatic defrost on both coolers and freezers
• 26 gauge corrosion resistant stucco embossed coated steel on all surfaces except interior floor
• Smooth aluminum interior floor (on models with floor)
• Floorless models supplied with NSF listed vinyl sealers
• Full 4" thick panels foamed-in-place with EPA-compliant polyurethane insulation
• 26" wide, self-closing door
• Heavy duty adjustable cam-lift hinges
• Spring actuated door closer
• Deadbolt locking handle with independent key/padlock feature and inside safety release
• Magnetic gasket
• Digital thermometer and light switch
• Floor double sweep gasket
• Perimeter door heater wire
• High output low profile LED light positioned above the door to prevent interference with shelving or product
• UL, C-UL listing on complete Capsule Pak™ refrigeration systems (see page 11 for listed components)***
• NSF, UL flame spread 25 or less on all foam cores; UL and CSA electrical listing on door sections ****
• City of Houston listed
• California State listed
• CN UL flame spread listed
• DOE compliant
• Oregon State listed
• USDA accepted
• 15 year panel warranty
• 18 months parts & labor warranty

INDOOR MODELS:

• Hot gas condensate vaporizer available on many models