Re-Verber-Ray DR-60, High Intensity Gas Fired Infrared Heater 60,000 BTU
Re-Verber-Ray DR-60 High Intensity Infrared Heater
PRODUCT INFO
The DR Series represents today’s most popular line of gas-fired, infrared heaters. This unvented heater is ideal for use in many applications including areas of high air filtration, high ceilings and spot heating. The DR Series offers exclusive design features, a proven history and a variety of BTU and control options.
Benetis of heating with infared:
- Superior Comfort
- Reduced Energy
- Consumption
- Flexibility
- Durability
- Radiant Efficiency
Product Features:
- Direct Spark Ignition, 100% Shutoff. (NFS-2, PFS-2 controllers)
- Manual Ignition, Constant Pilot, 100% Shutoff. (NMV-2 PMV-2 Millivolt controllers)
- 35 ft. wire and millivolt thermostat are included with each NMV-2/PMV-2 controls
- Select high temperature, stainless steel rods increase heater temperature and efficiency.
Mounting
- 20° to 35° from horizontal.
- Optional - Horizontal parabolic reflector (specify size) to emulate 0-15° angle.
- Inlet Pipe Size 1/2” NPT
- Mounting Hole Diameter 5/16”
WARNING
To Prevent Serious Injury or Death: Unit must be used in a well ventilated area. When used indoors or in an enclosed area, provide a positive air displacement of at least 4.0 CFM per 1,000 BTU/h of the heater’s rated input.
SPECIFICATIONS
| DR-60 | |||
| BTU | 60000 | ||
| SQ. IN. of Radiating Surface | 170 | ||
Typ. or RCMD. Mounting Heigts (Standard Reflector) | 14’ to 16’ | ||
| Net Weight Lbs | 27 | ||
| Gas Type | Natural or Propane | ||
| Ceramic Operating Temperature | 1780° F | ||
| Dimensions | H: 14 3/8” | ||
| L: 22 5/8” | |||
| W: 18 7/8” | |||
| Clearance to Combustibles | Sides(s): 32” | ||
| Back: 18” | |||
| Top: 40” | |||
| Below/Front: 72” |
| Recommended Mounting Heights and Distances for “Spot” Heating | |||||||
| Type of Area (Surroundings) | Approx. Area Covered | Approx. Coverage (sq. ft.) | Centers for Full Coverage (Spot & Area) Htg. Only | ||||
| Cold/Drafty | 16’ x 16’ | 256 | 16’ | ||||
| Average | 18’ x 18’ | 324 | 18’ | ||||
| Protected/Insul. | 20’ x 20’ | 400 | 20’ | ||||

HVAC
Plumbing
ELECTRICAL
Tools & Test Instruments