HVAC
Plumbing
ELECTRICAL
Tools & Test Instruments
Categories
Price
Type List
- Aluminum Snips
- Assisted Crimper
- Aviation Snip
- Aviation Snips
- Bit Pouch
- Bulldog Snips
- CO2 Cartridges
- Combination Snip
- Crimper
- Cutter Bit
- Digital Torque Wrench
- Drain Gun
- Drill Set
- Duct Knife
- Duct Shear
- Duct Stretcher
- Fin Comb
- Folding Jab Saw
- Folding Tool
- Hacksaw Frame
- Hand Notcher
- Hand Seamer
- Head Rivets
- Hex Driver
- Hex Key Set
- Hole Cutter
- Lock Punch
- Locking Tradesman Knife
- Metal Scribe
- Mini Brake
- Nut Driver
- Offset Crimper
- Paint Marker
- Pin Set
- Pliers
- Pocket Brake
- PRO-SET® Metric Torque Wrench Set
- PRO-SET® SAE Torque Wrench Set
- Quick-Change Magnetic Nut Driver
- Ratcheting Driver
- Replacement Blades
- Replacement Drill
- Scratch Awl
- Screwdriver
- Setting Hammer
- Staple Gun
- Staples
- Tape Measure
- Tapered Broach
- Tensioning Tool
- Trammel Point
- Tube Cutters
- TurboCrimper®
- Utility Knife
Hand Tools
Items 1 to 100 of 109 total
A portable sheet metal scoring tool that permits quick and precise, on the job, sheet metal fabrication Ergonomic ambidextrous design with twin metal scoring wheels...
SKU:
QCND
Vendor:
hilmor
Type:
Pocket Brake
Availability:
In-Stock
$42.00 USD
A portable sheet metal scoring tool that permits quick and precise, on the job, sheet metal fabrication Ergonomic ambidextrous design with twin metal scoring wheels...
SKU:
HPB1701
Vendor:
hilmor
Type:
Pocket Brake
Availability:
In-Stock
$101.00 USD
BRAND: CPS
ID: #WR100-1S9-1232
Available in 2-4 days
$135.00 USD
Interchangeable jaw torque wrench provides consistent and accurate readings Use to ensure compliance with OEM torque settings on R410A mini-split systems Range of 0 to...
SKU:
TLTWSAE
Vendor:
CPS
Type:
PRO-SET® SAE Torque Wrench Set
Availability:
In-Stock
$135.00 USD
BRAND: CPS
ID: #WR100-1S9-1231
Available in 2-4 days
$135.00 USD
Use to ensure compliance with OEM torque settings on R410A mini-split systems Range of 10 to 75 newton meters Includes storage case with 17, 22,...
SKU:
TLTWSM
Vendor:
CPS
Type:
PRO-SET® Metric Torque Wrench Set
Availability:
In-Stock
$135.00 USD
BRAND: CPS
ID: #WR100-1S9-1230
Available in 2-4 days
$296.00 USD
Use to ensure compliance with OEM torque settings on R410A mini-split systems Stores 5 factory and 5 user-defined torque presets Alerts user with audio, visual...
SKU:
BTLDTW
Vendor:
CPS
Type:
Digital Torque Wrench
Availability:
In-Stock
$296.00 USD
BRAND: Lenox
ID: #LE100-1S9-1065
Available in 2-4 days
Sold Out
Quickly switch between 1/4" and 5/16" Hollow shaft allows for use on long bolts Color-coded insert and bands makes size identification simple Slip-resistant comfort grip...
SKU:
QCND
Vendor:
Lenox
Type:
Quick-Change Magnetic Nut Driver
Availability:
Out-Stock
Sold Out
BRAND: Lenox
ID: #LE100-1S9-1064
Available in 2-4 days
Sold Out
High carbon steel bladesPrecision ground tips allow for deep cuts into tight spotsReinforced spring wire for longer lifeColor-coded handles and blades for easy recognitionComfortable grip,...
SKU:
22207207
Vendor:
Lenox
Type:
Aviation Snips
Availability:
Out-Stock
Sold Out
High carbon steel blades Precision ground tips allow for deep cuts into tight spots Reinforced spring wire for longer life Color-coded handles and blades for...
SKU:
22102102
Vendor:
Lenox
Type:
Aviation Snips
Availability:
In-Stock
$43.00 USD
BRAND: Lenox
ID: #LE100-1S9-1062
Available in 2-4 days
$43.00 USD
Over-molded rubberized comfort grip
Aluminum locking mechanism securely holds blade
Compatible with reciprocating (excluding demolition) and hacksaw blades
Includes 2 blades
SKU:
20997TFHS618636
Vendor:
Lenox
Type:
Folding Jab Saw
Availability:
In-Stock
$43.00 USD
Titanium coated stainless steel nose resists wear Great for cutting drywall, insulation, flooring, roofing and more Three shatter-resistant titanium edge blades included Quick change release...
SKU:
20353SSRK1
Vendor:
Lenox
Type:
Utility Knife
Availability:
In-Stock
$26.00 USD
BRAND: Lenox
ID: #LE100-1S9-1060
Available in 2-4 days
$33.00 USD
Tuff Tooth™ design cuts stronger, faster and longer
Outlasts carbon steel blades up to ten times
Flexible and virtually unbreakable
18 teeth per inch
SKU:
20146V232HE
Vendor:
Lenox
Type:
Hacksaw Frame
Availability:
In-Stock
$33.00 USD
BRAND: Lenox
ID: #LE100-1S9-1059
Available in 2-4 days
$33.00 USD
Tuff Tooth™ design cuts stronger, faster and longer
Outlasts carbon steel blades up to ten times
Flexible and virtually unbreakable
32 teeth per inch
SKU:
20145V224HE
Vendor:
Lenox
Type:
Hacksaw Frame
Availability:
In-Stock
$33.00 USD
BRAND: Lenox
ID: #LE100-1S9-1058
Available in 2-4 days
$56.00 USD
Unique lever tensions blade to 30,000 PSI, twice that of ordinary frames Mounts at 45° angle for flush cutting Use as jab saw or compass...
SKU:
12132HT50
Vendor:
Lenox
Type:
Hacksaw Frame
Availability:
In-Stock
$56.00 USD
All metal construction, including zinc-plated bar and cast aluminum handle
Includes 12" bimetal hacksaw blade
SKU:
1213188300
Vendor:
Lenox
Type:
Hacksaw Frame
Availability:
In-Stock
$39.00 USD
For use with Lenox Utility Knives
5-pack
SKU:
20350GOLD5C
Vendor:
Lenox
Type:
Locking Tradesman Knife
Availability:
Out-Stock
Sold Out
Quick release for fast blade changes
Includes wire stripper feature
SKU:
10771FLK1
Vendor:
Lenox
Type:
Locking Tradesman Knife
Availability:
In-Stock
$23.00 USD
Includes 4 screwdriver sizes and 2 nut drivers
Slip-resistant grip
SKU:
23931
Vendor:
Lenox
Type:
Screwdriver
Availability:
In-Stock
$19.00 USD
BRAND: JB
ID: #JB100-1S9-0186
Available in 2-4 days
$10.00 USD
Marking range: -50°F to +150°F Marks with real paint, dries in three minutes Marks on all surfaces Lead free, low halogens Meets California VOC regulations...
SKU:
96820
Vendor:
JB
Type:
Paint Marker
Availability:
In-Stock
$10.00 USD
Marking range: -50°F to +150°F Marks with real paint, dries in three minutes Marks on all surfaces Lead free, low halogens Meets California VOC regulations...
SKU:
96823
Vendor:
JB
Type:
Paint Marker
Availability:
In-Stock
$10.00 USD
5/64" to 1/4" and 2mm to 8mm sizes
2-piece set
SKU:
T30605
Vendor:
JB
Type:
Tube Cutters
Availability:
In-Stock
$42.00 USD
For opening and closing compressor service valves and shutoff valves
Made in the USA
SKU:
T21124U
Vendor:
JB
Type:
Tube Cutters
Availability:
In-Stock
$37.00 USD
3/16" and 5/16" hex bit in one tool Use in conjunction with a standard refrigeration service wrench for opening and closing most base mounted service...
SKU:
T2-HKA
Vendor:
JB
Type:
Tube Cutters
Availability:
Out-Stock
Sold Out
For opening and closing compressor service valves and shutoff valves
3/16" x 1/4" Sq. x 5/16" x 3/8" Sq.
SKU:
T21126U
Vendor:
JB
Type:
Tube Cutters
Availability:
In-Stock
$27.00 USD
BRAND: JB
ID: #JB100-1S9-0180
Available in 2-4 days
$28.00 USD
For opening and closing compressor service valves and shutoff valves
3/16" x 1/4" Sq. x 5/16" x 3/8" Sq.
SKU:
T21127U
Vendor:
JB
Type:
Tube Cutters
Availability:
In-Stock
$28.00 USD
Cleans and straightens fins
Sliding tension bars adjust to various fin sizes
Stainless steel teeth
Cushioned handle is contoured to protect your knuckles
SKU:
UFC1
Vendor:
Supco
Type:
Fin Comb
Availability:
In-Stock
$17.00 USD
BRAND: Diversitech
ID: #D100-1S9-1096
Available in 2-4 days
Sold Out
Availability:
Out-Stock
Sold Out
BRAND: Diversitech
ID: #D100-1S9-1093
Available in 2-4 days
Sold Out
Availability:
Out-Stock
Sold Out
BRAND: Diversitech
ID: #D100-1S9-1091
Available in 2-4 days
$93.00 USD
The fastest, easiest way to evacuate refrigerant before disposal of a unit. Snaps onto refrigerant line for full and immediate flow. Punctures super large hole...
SKU:
QT-100
Vendor:
Diversitech
Type:
Pliers
Availability:
In-Stock
$93.00 USD
For use with Arrow staple guns and most competitive brands
SKU:
540-508
Vendor:
Diversitech
Type:
Staples
Availability:
In-Stock
$7.00 USD
BRAND: Diversitech
ID: #D100-1S9-1086
Available in 2-4 days
$411.00 USD
Includes 41 gauging drills sizes 40 through 80 and one taper broach Durable plastic case For hand use only Easy drill removal and replacement Conversion...
SKU:
GDK4080
Vendor:
Diversitech
Type:
Drill Set
Availability:
In-Stock
$411.00 USD
BRAND: Diversitech
ID: #D100-1S9-1084
Available in 2-4 days
$107.00 USD
For fastening insulation around pipes and duct work
SKU:
540-T50MOC
Vendor:
Diversitech
Type:
Staple Gun
Availability:
In-Stock
$107.00 USD
BRAND: Diversitech
ID: #D100-1S9-1083
Available in 2-4 days
$25.00 USD
Availability:
In-Stock
$25.00 USD
Designed to blow out drain lines instantly New larger 20 gram SWOOSH CO2 cartridges deliver 800 PSI of oil free air to clear the line,...
SKU:
SG-1
Vendor:
Diversitech
Type:
Drain Gun
Availability:
In-Stock
$52.00 USD
Designed to blow out drain lines instantly New larger 20 gram SWOOSH CO2 cartridges deliver 800 PSI of oil free air to clear the line,...
SKU:
SGC-12
Vendor:
Diversitech
Type:
CO2 Cartridges
Availability:
In-Stock
$56.00 USD
Lightweight portable tool blows out drain lines instantly
Tapered fitting works on 3/8" through 3/4" drain openings
SKU:
GG-1
Vendor:
Diversitech
Type:
Drain Gun
Availability:
In-Stock
$62.00 USD
Availability:
In-Stock
$54.00 USD
5/16" hex head, 1/4" square drive shank
Facilitates easy ratcheting action for servicing hard-to-access valves common in air conditioning and refrigeration condensing units
SKU:
RRW5/16
Vendor:
Malco
Type:
Ratcheting Driver
Availability:
In-Stock
$15.00 USD
Quick-connect handle accepts 1/4" hex shank power drive or insert bit Ratcheting handle features forward or reverse ratcheting mechanism Clear molded handles are shock and...
SKU:
CONNEXT3
Vendor:
Malco
Type:
Ratcheting Driver
Availability:
In-Stock
$17.00 USD
Precision fit and hardened components
Connext quick change handles accept any 1/4" shank hex driver
Hex drivers are color coded for easy size identification
SKU:
HHD1
Vendor:
Malco
Type:
Aviation Snip
Availability:
In-Stock
$24.00 USD
Precision fit and hardened components
Connext quick change handles accept any 1/4" shank hex driver
Hex drivers are color coded for easy size identification
SKU:
HHD2
Vendor:
Malco
Type:
Aviation Snip
Availability:
In-Stock
$25.00 USD
Hardened alloy steel blades offer maximum cutting life
Fast adjusting, long life pivot bolt
Ultra smooth corrosion resistant finish
SKU:
M2006C
Vendor:
Malco
Type:
Aviation Snip
Availability:
Out-Stock
Sold Out
Hardened alloy steel blades offer maximum cutting life
Fast adjusting, long life pivot bolt
Ultra smooth corrosion resistant finish
SKU:
M2007C
Vendor:
Malco
Type:
Aviation Snip
Availability:
In-Stock
$63.00 USD
2-in-1 adjustment features long stroke for most hand riveting applications and short "ratchet action" power stroke for setting larger diameter rivets Interchangeable nose pieces for...
SKU:
2N1
Vendor:
Malco
Type:
Head Rivets
Availability:
In-Stock
$154.00 USD
Availability:
In-Stock
$56.30 USD
Easily and quickly crimp large diameter duct and multiple smaller duct runs Inserts into chuck of 14.4V (minimum) cordless or 7A (maximum) corded drill Crimps...
SKU:
C5A
Vendor:
Malco
Type:
Assisted Crimper
Availability:
Out-Stock
Sold Out
Expands to a 42" radius and creates an 84" diameter Minimum radius is 12" All steel construction Points are resharpenable Telescoping arms are nickel plated...
SKU:
TR42
Vendor:
Malco
Type:
Trammel Point
Availability:
In-Stock
$59.00 USD
Double-edged knife blade cleanly pierces through outer skin, insulation and liner of flexible round duct Blade cuts both directions, from any angle and around entire...
SKU:
FDC3
Vendor:
Malco
Type:
Replacement Blades
Availability:
In-Stock
$132.00 USD
For use with Malco FG1 Hole Cutters
SKU:
KBHC
Vendor:
Malco
Type:
Replacement Blades
Availability:
In-Stock
$15.00 USD
Strong lightweight polymer frame
Easy-to-grasp, protective handle loops
Designed for all weather conditions
Replacement blades are easily installed on the job
SKU:
ULC10
Vendor:
Malco
Type:
Duct Stretcher
Availability:
In-Stock
$56.00 USD
48" L x 1-1/4" W x 1/16" D
SKU:
48BS
Vendor:
Malco
Type:
Duct Stretcher
Availability:
In-Stock
$130.00 USD
Frees both hands to align and install drive cleats Tool locks on from either side of duct connection Large wheel clearance captures even misshapen flanges...
SKU:
DS3
Vendor:
Malco
Type:
Duct Stretcher
Availability:
In-Stock
$66.00 USD
Features rounded scoring edge to cut fiberboard without tearing fiberboard skin
SKU:
FGK
Vendor:
Malco
Type:
Replacement Blades
Availability:
In-Stock
$27.00 USD
REDLINE™ ergonomically contoured non-slip handles Joins sheet metal, duct and pipe sections Raises a louvered projection on metal edge for locking into rolled edge of...
SKU:
SL2R
Vendor:
Malco
Type:
Offset Crimper
Availability:
In-Stock
$83.00 USD
Lightweight, compact size and slim nose projection Interchangeable nose pieces for sizes 3/32", 1/8", 5/32", and 3/16" Not for use with 5/32" or 3/16" steel...
SKU:
CR18
Vendor:
Malco
Type:
Offset Crimper
Availability:
In-Stock
$67.00 USD
REDLINE™ ergonomically contoured non-slip handles Long, shallow crimps allow for a tighter fitting, more self supporting connection Latch allows for easy open and close with...
SKU:
C6R
Vendor:
Malco
Type:
Offset Crimper
Availability:
In-Stock
$92.00 USD
Cuts 4" to 20" diameter holes Cutter rotates counter clockwise on a center pivot punch Includes standard 1" utility knife blade 1-1/2" blade sold separately...
SKU:
FG1
Vendor:
Malco
Type:
Hole Cutter
Availability:
Out-Stock
Sold Out
Availability:
In-Stock
$52.00 USD
Scribes a thin, accurate line time after time
Points are easily resharpenable or replaced
Nickel-plated steel body
SKU:
24
Vendor:
Malco
Type:
Bit Pouch
Availability:
In-Stock
$44.00 USD
Fits cordless or corded drills
Holds up to 4 driver bits
Durable, flush-fitting synthetic fabric
SKU:
PD-1EV
Vendor:
Malco
Type:
Bit Pouch
Availability:
Out-Stock
Sold Out
1-piece forged, I-beam construction
Full-polished heads with beveled face and pein are corrosion resistant Sections are individually hardened and tempered for strength and resiliency
SKU:
RH4
Vendor:
Malco
Type:
Aviation Snips
Availability:
In-Stock
$101.00 USD
For use with Malco Sheet Metal Hole Cutters
SKU:
HC1E
Vendor:
Malco
Type:
Aviation Snips
Availability:
Out-Stock
Sold Out
Hardened alloy steel blades offer maximum cutting life Latch is accessible from left, right or top Fast adjusting, long life pivot bolt Easy replacement of...
SKU:
M2002
Vendor:
Malco
Type:
Aviation Snips
Availability:
In-Stock
$61.00 USD
Fabricate drip pans, register boxes, complex corners and larger transitions or plenums at the jobsite Accommodates sheet metal up to 48" wide Makes bends to...
SKU:
MB48B
Vendor:
Malco
Type:
Mini Brake
Availability:
Out-Stock
Sold Out
Accommodates sheet metal up to 4' wide, in any length Dual-direction, cam-over style clamps keep anvil secure in any position Makes bends to 135° in...
SKU:
MB48A
Vendor:
Malco
Type:
Mini Brake
Availability:
In-Stock
$708.00 USD
1-piece forged, I-beam construction Full-polished heads with beveled face and pein are corrosion resistant Sections are individually hardened and tempered for strength and resiliency Molded-on...
SKU:
SH3V
Vendor:
Malco
Type:
Setting Hammer
Availability:
In-Stock
$95.00 USD
Hardened alloy steel blades offer maximum cutting life Latch is accessible from left, right or top Fast adjusting, long life pivot bolt Easy replacement of...
SKU:
M2003
Vendor:
Malco
Type:
Aviation Snips
Availability:
Out-Stock
Sold Out
Cuts insulated flexible round duct and duct wire rib coil Heavy-duty wire cutter is located away from scissor blades Thumb operated latch ensures sharpened blade...
SKU:
FDC2
Vendor:
Malco
Type:
Duct Shear
Availability:
In-Stock
$88.00 USD
For straight, left and right cuts
Cuts circles down to a 6" diameter
Strong lightweight aluminum frame
Long life inlaid steel blades
SKU:
MC12N
Vendor:
Malco
Type:
Combination Snip
Availability:
In-Stock
$59.00 USD
Hardened alloy steel blades offer maximum cutting life Latch is accessible from left, right or top Fast adjusting, long life pivot bolt Easy replacement of...
SKU:
M2005
Vendor:
Malco
Type:
Bulldog Snips
Availability:
In-Stock
$63.00 USD
Measure, mark and scribe trim lines in one easy operation Adjustable from 1/4" to 12-1/2" No special point required — uses a standard 6 x...
SKU:
A60
Vendor:
Malco
Type:
Metal Scribe
Availability:
In-Stock
$31.00 USD
Hardened alloy steel blades offer maximum cutting life Latch is accessible from left, right or top Fast adjusting, long life pivot bolt Easy replacement of...
SKU:
M2001
Vendor:
Malco
Type:
Scratch Awl
Availability:
In-Stock
$61.00 USD
REDLINE™ ergonomically contoured non-slip handles Hook design of cutting jaw facilitates notching to desired depth without slippage Latch allows for easy open and close with...
SKU:
N2R
Vendor:
Malco
Type:
Scratch Awl
Availability:
Out-Stock
Sold Out
Scribes lines on sheet metal, plastic and a variety of other materials 1/4" x 4" blade is tapered and can be resharpened many times Handle...
SKU:
A20
Vendor:
Malco
Type:
Scratch Awl
Availability:
In-Stock
$12.50 USD
REDLINE™ ergonomically contoured non-slip handles Hook design of cutting jaw facilitates notching to desired depth without slippage Latch allows for easy open and close with...
SKU:
N1R
Vendor:
Malco
Type:
Hand Notcher
Availability:
In-Stock
$92.00 USD
Scribes a thin, accurate line time after time
Points are easily resharpenable or replaced
Nickel-plated steel body
SKU:
18
Vendor:
Malco
Type:
Aviation Snips
Availability:
In-Stock
$29.00 USD
Strong molded plastic frame with chrome pocket clip
Multi-view vial reads top, bottom or side
Ideal for leveling thermostats
SKU:
L5
Vendor:
Malco
Type:
Aviation Snips
Availability:
In-Stock
$14.00 USD
Hardened alloy steel blades offer maximum cutting life Latch is accessible from left, right or top Fast adjusting, long life pivot bolt Easy replacement of...
SKU:
M2007
Vendor:
Malco
Type:
Aviation Snips
Availability:
In-Stock
$72.00 USD
Scribes lines on sheet metal, plastic and a variety of other materials 1/4" x 4" blade is tapered and can be resharpened many times Handle...
SKU:
A2
Vendor:
Malco
Type:
Scratch Awl
Availability:
In-Stock
$12.00 USD
Use stretcher to hold duct in place with one hand, while slipping drive cleats in place with other hand Additional spacing holes allow wheels to...
SKU:
DS2
Vendor:
Malco
Type:
Duct Stretcher
Availability:
Out-Stock
Sold Out
Double-edged knife blade cleanly pierces through outer skin, insulation and liner of flexible round duct Blade cuts both directions, from any angle and around entire...
SKU:
FDC1
Vendor:
Malco
Type:
Aluminum Snips
Availability:
In-Stock
$83.00 USD
Use with power drills or Connext quick change handles Hex drivers are color coded for easy size identification 1/4" power insert shanks
SKU:
MSHML516
Vendor:
Malco
Type:
Aluminum Snips
Availability:
In-Stock
$17.00 USD
For straight, left and right cuts
Cuts circles down to a 6" diameter
Strong lightweight aluminum frame
Long life inlaid steel blades
SKU:
MC14N
Vendor:
Malco
Type:
Aluminum Snips
Availability:
In-Stock
$76.00 USD
Availability:
In-Stock
$55.00 USD
For use with Malco Sheet Metal Hole Cutters
SKU:
HC1B
Vendor:
Malco
Type:
Pin Set
Availability:
In-Stock
$20.00 USD
Magnetic tipped tape measure with cushioned blade stop
Abrasion-resistant nylon coated blade
Impact-resistant, rubber-clad housing
SKU:
T425M
Vendor:
Malco
Type:
Tape Measure
Availability:
In-Stock
$37.00 USD
For straight shearing, mild curve cuts and multiple layers of material
Strong lightweight aluminum frame
Long life inlaid steel blades
SKU:
STKMR
Vendor:
Malco
Type:
Lock Punch
Availability:
Out-Stock
Sold Out
For straight shearing, mild curve cuts and multiple layers of material
Strong lightweight aluminum frame
Long life inlaid steel blades
SKU:
M12A
Vendor:
Malco
Type:
Lock Punch
Availability:
In-Stock
$63.00 USD
For straight shearing, mild curve cuts and multiple layers of material
Strong lightweight aluminum frame
Long life inlaid steel blades
SKU:
M14A
Vendor:
Malco
Type:
Aluminum Snips
Availability:
In-Stock
$69.00 USD
REDLINE™ ergonomically contoured non-slip handles Joins sheet metal, duct and pipe sections Raises a louvered projection on metal edge for locking into rolled edge of...
SKU:
SL1R
Vendor:
Malco
Type:
Lock Punch
Availability:
Out-Stock
Sold Out
Long L-style keys for hard-to-reach applications
Tough alloy steel with black oxide finish
Includes 5/64", 3/32", 1/8", 5/32", 3/16", 7/32" and 1/4"
SKU:
W12
Vendor:
Malco
Type:
Hex Key Set
Availability:
In-Stock
$49.00 USD
Availability:
In-Stock
$39.00 USD
Ergonomically contoured non-slip handles
Latch allows for easy open and close with 1 hand
SKU:
SC3R
Vendor:
Malco
Type:
Crimper
Availability:
In-Stock
$72.00 USD
Places common trim lines on sheet metal quickly and accurately Dual-edged scribing points Creates clean, readable score lines parallel to edge of metal sheet Ten...
SKU:
A40
Vendor:
Malco
Type:
Metal Scribe
Availability:
In-Stock
$6.00 USD
Use with power drills or Connext quick change handles Hex drivers are color coded for easy size identification 1/4" power insert shanks
SKU:
SH3
Vendor:
Malco
Type:
Setting Hammer
Availability:
In-Stock
$98.00 USD
Availability:
In-Stock
$27.00 USD
Ergonomically contoured non-slip handles Scaled depth marks on jaws are in 1/4" increments for precise depth bends Latch allows for easy open and close with...
SKU:
S6R
Vendor:
Malco
Type:
Hand Seamer
Availability:
In-Stock
$131.00 USD
Hardened alloy steel blades offer maximum cutting life Latch is accessible from left, right or top Fast adjusting, long life pivot bolt Easy replacement of...
SKU:
M2006
Vendor:
Malco
Type:
Nut Driver
Availability:
In-Stock
$72.00 USD
1/4", 5/16", 3/8" and 7/16" hex sizes
Positive locking telescoping shaft
High torque, non-slip over-molded grip
SKU:
4IN1
Vendor:
Malco
Type:
Nut Driver
Availability:
In-Stock
$29.00 USD
Double-edged knife with regular and serrated edges 6" blade cuts duct board and flexible duct Cushion grip handle for comfort Includes nylon sheath with belt...
SKU:
DK6S
Vendor:
Malco
Type:
Duct Knife
Availability:
In-Stock
$29.00 USD
Compact design for use in tight spaces
Forged steel jaws with serrations on lower jaw
Hardened steel-core handles
Self-opening latch
Ergonomic non-slip handle design
SKU:
AVM6
Vendor:
Malco
Type:
Aviation Snips
Availability:
Out-Stock
Sold Out