HVAC
Plumbing
ELECTRICAL
Tools & Test Instruments
Categories
Price
Type List
- 4-Tool Cordless Combo Kit
- Absorbent Utility Pads
- Accelerator Rapid Evacuation Kit
- Access Quick Coupler
- Acme Adapter
- Adjustable Wrench
- Adjustable Wrench Set
- Air-Acetylene Hose
- Airflow and Wind Indicator
- Airflow Balancing Meter
- Aluminum Handled Combination Snips
- Aluminum Snips
- Andy Aluminum Handled Snips
- Assisted Crimper
- Automotive Refrigerant Side Can Tap
- Aviation Mini-Snip
- Aviation Snip
- Aviation Snips
- Aviation Snips with Green Grip
- Ball Valve
- Ball Valve Set
- Battery
- Battery Pack
- Bearing for Hole Cutter
- BiMetal Metal Saw Blades
- Bit Extension
- Bit Pouch
- Bit Set
- Black Fine Point Marker
- Blade for Sure Grip Tube Slicer
- Bulldog Snips
- Button Head Rivets
- Capacitor Discharge Pen
- Carbide Tipped Masonry Bit
- Channel Shear
- Charging Hose
- Charging Hose Set
- Charging Hoses
- Chuck Key
- Clamp Meter
- Classic Aluminum Handled Combination Snips
- Clutch Driven Flaring Tool
- CO2 Cartridges
- CO2 Refill Cartridges
- CO2 Regulator
- CO2 to Nitrogen Adapter
- Coil Cleaning Machine
- Combination Cutting Snip
- Combination Pliers
- Combination Snip
- Combustion Analyzer
- Compact Battery Pack
- Compact Hydraulic Swage Tool Kit
- Compact Organizer
- Compact Ratcheting Tube Bender
- Compact Ultra Light Vinyl-Cutting Combination Snips
- Compound Leverage Stone Coated Steel Roofing Cutter
- Compute-A-Charge Electronic Refrigerant Scale
- Compute-A-Charge® Wireless Refrigerant Scale
- Connext Kit with Ratcheting Handle
- Connext Magnetic Hex Driver
- Cooler
- Cordless Drill/Driver
- Cordless Hammer Drill/Driver
- Cordless Installation Drill/Driver Kit
- Cordless Lithium-Ion Copper Tubing Cutter Kit
- Cordless Screwdriver Kit
- Core Removal Tool
- Coupling Fitting
- Crate
- Crimper
- Curved Jaw Locking Pliers
- Cutter Bit
- Cutting Wheel for Tube Cutters
- Data Logger
- Dial Thermometer
- Digital Capacitor Tester
- Digital Thermometer
- Digital Torque Wrench
- Disconnect Switch
- Double Cutting TurboShear
- Double Gripping Power Grip Caulking Gun
- Double-Cut TurboShear Replacement Blade
- Drain Cone
- Drain Dawg
- Drain Gun
- Drain Kat
- Drain Line Flush Device
- Drill Bit
- Drill Bit Set
- Drill Clamp
- Drill Set
- Drip Edge Folding Tool
- Drive Bit
- Drive Shaft
- Dual Temperature Heat Gun
- Dual-Sided Reversible Hex Driver
- Duct Board Washer
- Duct Knife
- Duct Shear
- Duct Stretcher
- Duct Stretcher Replacement Wheel Kit
- Dust Masks
- EasyHood™ Airflow Capture Hood Kit
- Electrical Cutter/Stripper/Crimper Plier
- Electrical Wire Cutter/Stripper
- Electronic Refrigerant Scale
- Equipment Tracker
- Eurocap Tamper Proof Cap
- Extended Capacity Battery Pack
- Extension Pole
- Face Mask
- Fiber Cement Angle Cutter
- Fiber Cement Mixed Gauge Set
- Fiber Cement Siding Facing Gauge
- Fiber Cement Siding Guillotine Shear
- Fiber Cement Siding Overlap Gauge
- Fin Comb
- Flaring Kit
- Flex Mini Split Adapter
- Flexible Duct Support
- Flip Utility Knife
- Foam Pig
- Foam Pig Kit
- Foamboard Staples
- Folding Jab Saw
- Folding Tool
- Folding Utility Knife
- Fuse
- Gas Test Gauge
- Gauge Boot
- Grinding Wheel
- Gutter Outlet Tool Frame
- Hacksaw Frame
- Hand Notcher
- Hand Seamer
- Hanging Strap
- Head Rivets
- Heavy Duty Replacement Blades
- Heavy Duty Trim Nail Punch
- Heavy-Duty Corded Swivel Head Shear
- Heavy-Duty Hammerdrill
- Hex Cordless Impact Driver
- Hex Cordless Impact Driver Kit
- Hex Driver
- Hex Driver®
- Hex Impact Driver Combo
- Hex Key Ratchet Wrench Insert
- Hex Key Set
- Hex Quick Change Adapter
- Hidden Nail Cutter
- High Carbon Steel Saw Blades for Wood
- High Side Gauge
- Hole Cutter
- Hole Saw
- Hose Depressor
- Hose Gasket
- HVAC Deluxe Starter Kit
- HVAC Starter Tool Kit
- Hybrid Jumper
- Impact Magnetic Nut Driver
- Infrared Thermometer
- Inspection Camera
- Inspection Camera Kit
- Internal Pipe Wrench
- Jobsite Fan
- Kobra Charging Hose
- Large Hole Saw Arbor
- Large Ratchet Tube Cutter
- Large Tool Box
- Lashing Strap
- Leak Detector
- Leak Seeker
- Left Cut Vertica Aviation Snips
- Leg Kit for Portable Mini Brake
- Lightweight Aluminum Handled Snips
- Line Set Cleaner Tool Kit
- Liquid Charging Adapter
- Lithium-Ion 1/4" Hex Cordless Impact Driver
- Lithium-Ion Cordless Recip Saw Kit
- Lithium-Ion Work Light
- Lock Punch
- Locking Tradesman Knife
- Long Magnetic Hex Chuck Driver
- Long Neck Combustible Gas Leak Detector
- Low Side Gauge
- Low-Pressure
- Low-Profile Compact Organizer
- Low-Profile Organizer
- Machine Switch
- Magjumper
- Magnetic Bit Holder
- Magnetic Gutter Screw Guide
- Magnetic Manifold Gauge Holder
- Magnetic Tape Measure
- Magnetic Umbrella
- MagneticHand Driver
- Maintenance Kit
- Manifold
- MAX Jaw
- MAX Jaw Kit
- MC-B Tank Adapter
- Megohmmeter
- Metal Scribe
- Milled Variable/Standard Reciprocating BiMetal Wood Saw Blade
- Mini Brake
- Mini Data Logger
- Mini-Size Trim Nail Punch
- Molecular Transformator
- Mounting Flood Light
- Multi Key
- Multi-Purpose Fencing Pliers
- Needle and Gasket
- Nitrile Gloves
- Nitrogen Purge Tool
- Nut Driver
- Nylon Ties
- O-Ring Seal
- O-Rings
- Offset Crimper
- Organizer
- Paint Marker
- PEX to Wire Tool
- PEX Tubing Uncoiler In Case
- Phillips Chuck Driver Insert Bit
- Phillips Chuck Long Driver Insert Bit
- Phillips Insert Bit
- Piece Screw Extractor Kit
- Pilot Bit
- Pin Actuator
- Pin Set
- Pipe and Duct Holder
- Plastic Tube Slicer
- Pliers
- Plunger Actuator
- Pocket Brake
- Pocket Tool Backpack
- Point Break Away Blades
- Pre-Assembled Damper w/ Wing Nuts
- Press Tool
- PRO-SET® Metric Torque Wrench Set
- PRO-SET® SAE Torque Wrench Set
- PRO-SET® Spark Proof Refrigerant Recovery Unit
- Punch & Die Set
- Push Switch
- Quick Action Carbide Tipped Hole Saw
- Quick Change Pilot Drill
- Quick Release Arbor with Pilot Drill
- Quick-Change Magnetic Nut Driver
- R134A Manual Automotive Coupler
- R134A Snap-N-Seal Automotive Coupler
- R410A Universal A/C Tool and Adapter Kit
- Rasping Jab Saw
- Ratchet Strap
- Ratchet Wrench Insert
- Ratcheting Driver
- Recip Saw
- Reciprocating Blade
- Reciprocating Saw
- RedLine Ceiling Grid Punch
- RedLine Downspout Crimper
- RedLine Fiber Cement Siding Snip
- RedLine Hand Seamer
- RedLine Hole Punch
- RedLine J-Channel Cutter
- RedLine Nail Hole Slot Punch
- RedLine Punch Lock Stud Crimper
- RedLine Snap Lock Punch
- Refrigerant
- Refrigeration Ratchet Wrench
- Refrigeration Temperature Recorder
- Replacement Blade
- Replacement Blade & 2 Spacers for SRC24A Channel Shear
- Replacement Blade for Stone Coated Steel Roofing Cutter
- Replacement Blade Set
- Replacement Blades
- Replacement Blades for MC14A Combination Snips
- Replacement Blades for Tin Snips
- Replacement Cartridge
- Replacement Cutter Bit for HC1 & HC2
- Replacement Drill
- Replacement Gasket
- Replacement Gauge
- Replacement Lens
- Replacement Shoe for Hole Cutte
- Replacement Spring
- Replacement Thrust Bearing for Hole Cutter
- Retractable Magnetic Jumper
- Right Angle Drill Attachment
- Right Cut Vertical Aviation Snips
- Ring Jaw
- Rolling Tool Box
- Safety Drop Cloth
- Scratch Awl
- Screwdriver
- Screwdriver Key
- Secure Seal
- Secure Seal Fitting
- Secure Seal Fitting Straight
- Setting Hammer
- Shaft Blaster
- Shaft Blaster Discs
- Sheet Metal Hammer
- Sheet Metal Screws
- Shockwave Adapter
- Shockwave Hex Nut Driver Bit
- Shockwave Phillips Bit
- Shoe Covers
- Short Magnetic Hex Chuck Driver
- Shut-Off Stem
- Side Can Tap
- Slide Valve Core Removal Tool
- SMART Pro/R Service Tool
- SMART Tool Kit
- SmartAir™ Meter
- SmartClips for SM1 Stapler
- SmartTool Stapler
- Snap Lock Punch
- Spring for Sheet Metal Tools
- Square Combination
- Square Head Chuck Driver Insert Bit
- Standard Rectangular Hole Gutter Outlet Die
- Staple Gun
- Staples
- Starter Tool Kit
- Station Edge Roller
- Steel Cutting Circular Saw Blade
- Straight Aluminum Snips
- Straight Double Cut Aviation Snips
- Straight Edge Ruler
- Straight Fitting
- Straight Jaw Locking Pliers
- Straight-Jaw Plier
- Stretch Straps
- Style Hole Gutter Outlet Die
- Super Heat Calculation Tool
- Supercomb
- Swaging Kit
- T-Hex Key
- Tamper Proof Cap
- Tank Tote
- Tape Measure
- Tapered Broach
- Temperature Alarm
- Temperature Recorder
- Temperature Recorder Replacement Charts
- Temperature Tester
- TempSmart Data Logger
- TempSmart Wireless Data Logger Kit
- Tensioning Tool
- Tensioning Tools with Manual Cut Off Tie Tool
- Termination Fitting
- Test Instrument
- Thermo-Hygrometer
- Tinner's Circumference Ruler
- Tool
- Tool Box
- Tool Case with Foam Insert
- Torch Shield
- Trammel Point
- Trim Nail Punch with Retaining Clip
- Truck Rope
- Tube Cutter
- Tube Cutters
- TurboCrimper®
- TurboShear
- TurboShear - Corrugated Metal Attachment
- TurboShear Heavy-Duty
- TurboShear Slate - Cutting Drill Attachment
- Turn Anti-Blowback Adaptor
- Universal Flex Duct Knife Sheath
- Universal Screwdriver Key
- Utility Blades 5PK
- Utility Knife
- Utility Lift
- Vacuum Gauge
- Vacuum Indicator Gauge
- Vacuum Pump
- Vacuum Pump Oil
- Valve Core Removal Tool
- VaporVue Charging Device
- Velocity Rapid Evacuation Kit
- Vent Saw Replacement Drill Bit
- Viega MegaPress Fittings
- Vinyl Fence Rail Notcher
- Voltage Tester
- Wireless Airflow Balancing and Environmental Meter
- Wireless Detector
- Wireless Dual Input Manometer
- Wireless Dual Input Manometer Kit
- Wireless P/T Gauge
- Wireless Solenoid Valve
- Wiring Harness Connector
- Wood Staple
- Wood Vent Saw
- Wood/Foamboard Stapler
TOOLS & TEST INSTRUMENTS
Items 101 to 200 of 991 total
BRAND: Malco
ID: #E200-2SH9-0084
$3.50 USD
Overall Length: 1"
Insert Diamter: 1/4"
SKU:
MBSP2P
Vendor:
Malco
Type:
Phillips Insert Bit
Availability:
In-Stock
$3.50 USD
BRAND: Malco
ID: #E200-2SH9-0085
$30.80 USD
Qty: 500 Screw Size: 10-16x3/4. Head Type: (HW) Hex Washer Not Slotted Driver Size: 5/16" Hex Length of screw: 3/4". Bit-Tip screw #3 Point. Material...
SKU:
BT143T
Vendor:
Malco
Type:
Sheet Metal Screws
Availability:
In-Stock
$30.80 USD
Using the Facing Gauge while working across the width of the plank assures greater accuracy of the desired exposure and guards against sagging. The Facing...
SKU:
FCFG
Vendor:
Malco
Type:
Fiber Cement Siding Facing Gauge
Availability:
In-Stock
$12.75 USD
Use for 1" Foamboard
SKU:
FBSN1
Vendor:
Malco
Type:
Foamboard Staples
Availability:
In-Stock
$30.40 USD
BRAND: Malco
ID: #E200-2SH9-0087
$31.60 USD
Head Size: 1/4" Length: 2" Number: 8 Color: White Quantity: 250 Package Type: Tub Single starting thread machined down to very tip of screw point...
SKU:
HW8X2ZWT
Vendor:
Malco
Type:
Sheet Metal Screws
Availability:
In-Stock
$31.60 USD
Strong, one-piece tempered spring steel construction. Precision-ground tip assures gauge will grip behind siding plank. No adjustments to vary and nothing to mark. Will nor...
SKU:
FCG2
Vendor:
Malco
Type:
Fiber Cement Siding Overlap Gauge
Availability:
In-Stock
$32.00 USD
Larger Handle Loops
Sleek Head Design Improves Maneuverability
Full 3" (76.2 mm) Cutting Length - 12"
Pressure-fit Inset Blades (Replacement: M12NRB)
SKU:
FBSN2
Vendor:
Malco
Type:
Foamboard Staples
Availability:
In-Stock
$31.00 USD
Larger Handle Loops
Sleek Head Design Improves Maneuverability
Full 3" (76.2 mm) Cutting Length - 12"
Pressure-fit Inset Blades (Replacement: M12NRB)
SKU:
M12N
Vendor:
Malco
Type:
Lightweight Aluminum Handled Snips
Availability:
In-Stock
$32.00 USD
SKU:
HC1K
Vendor:
Malco
Type:
Bearing for Hole Cutter
Availability:
In-Stock
$12.70 USD
Easily cut thick or layered building materials including wood, wall tile, fiberglass, plastic, even fiber-cement siding! Eject saw plugs with ease too! These carbide tipped...
SKU:
HF6
Vendor:
Malco
Type:
Quick Action Carbide Tipped Hole Saw
Availability:
In-Stock
$32.30 USD
Designed for cutting all types of hard and soft wood, and other non-ferrous materials including plywood, composition board and siding Easily replaceable alloy steel blades...
SKU:
RBW68
Vendor:
Malco
Type:
Replacement Blade
Availability:
In-Stock
$32.30 USD
BRAND: Malco
ID: #E200-2SH9-0093
Sold Out
Head Size: 1/4" Length: 3/4" Number: 8 Quantity: 1,000 Package Type: Tub Single starting thread machined down to very tip of screw point Instantly penetrates...
SKU:
HW8X3/4ZT
Vendor:
Malco
Type:
Sheet Metal Screws
Availability:
Out-Stock
Sold Out
BRAND: Malco
ID: #E200-2SH9-0094
$33.60 USD
Extra long, hardened and tempered alloy steel “T” Handle hex keys provide extra reach and extra leverage. Plus, vinyl cushion grips and comfort provide added...
SKU:
WT6SG
Vendor:
Malco
Type:
T-Hex Key
Availability:
In-Stock
$33.60 USD
Easily cut thick or layered building materials including wood, wall tile, fiberglass, plastic, even fiber-cement siding! Eject saw plugs with ease too! These carbide tipped...
SKU:
HF5
Vendor:
Malco
Type:
Quick Action Carbide Tipped Hole Saw
Availability:
In-Stock
$33.70 USD
AWG Cap: 20-10 ga.
Metric Cap: .5 - 5.3 mm.
O/A Length: 6" (152 mm. )
Weight: 4 oz. (113 g.)
SKU:
WSC1S
Vendor:
Malco
Type:
Electrical Wire Cutter/Stripper
Availability:
In-Stock
$33.90 USD
Cuts in tight spaces and overhead
Easy gripping for push or pull motion left cuts
Powerful non-slip cutting leverage
SKU:
AV9
Vendor:
Malco
Type:
Right Cut Vertical Aviation Snips
Availability:
In-Stock
$33.90 USD
Temporarily suspends duct or venting
Works on any joist
Formed teeth hold clamp securely in place
Double-ended keyhole
SKU:
2DH
Vendor:
Malco
Type:
Pipe and Duct Holder
Availability:
In-Stock
$34.30 USD
Replacement Thrust Bearing for Hole Cutter
SKU:
HC1D
Vendor:
Malco
Type:
Replacement Thrust Bearing for Hole Cutter
Availability:
In-Stock
$34.80 USD
BRAND: Malco
ID: #E200-2SH9-0100
$35.50 USD
Undercut-indented hex washer slotted head Bright Zinc Plated Burr Free Full 1/4" (no. 8) head will not strip out of hex driver opening One 1/4"...
SKU:
HW6X3/8ZRBT
Vendor:
Malco
Type:
RedLine Downspout Crimper
Availability:
In-Stock
$35.50 USD
Handle opening that maximizes the powerful leverage of compound head-to-handle linkage while providing a more comfortable operating range for your hand Ergonomic handle contours with...
SKU:
C4R
Vendor:
Malco
Type:
RedLine Downspout Crimper
Availability:
In-Stock
$35.60 USD
These fencing pliers offer a variety of uses for the fencing professional. Malco’s FCP1 Multi-Purpose Fencing pliers is a combination of a hammer, wire tensioner,...
SKU:
FCP1
Vendor:
Malco
Type:
Multi-Purpose Fencing Pliers
Availability:
In-Stock
$34.60 USD
Easily cut thick or layered building materials including wood, wall tile, fiberglass, plastic, even fiber-cement siding! Eject saw plugs with ease too! These carbide tipped...
SKU:
HF7
Vendor:
Malco
Type:
Quick Action Carbide Tipped Hole Saw
Availability:
In-Stock
$36.10 USD
Secures PEX to both wood or foamboard faster than any other layout method Operates from a comfortable standing position Fast, one-handed stapling in a single...
SKU:
PWS1
Vendor:
Malco
Type:
Wood/Foamboard Stapler
Availability:
In-Stock
$359.40 USD
Larger Handle Loops
Sleek Head Design Improves Maneuverability
Full 3-1/4" (82.6 mm) Cutting Length - 14"
Pressure-fit Inset Blades (M14N, MC14N)
Optional Snip Holster
SKU:
M14N
Vendor:
Malco
Type:
Andy Aluminum Handled Snips
Availability:
In-Stock
$36.80 USD
Easily cut thick or layered building materials including wood, wall tile, fiberglass, plastic, even fiber-cement siding! Eject saw plugs with ease too! These carbide tipped...
SKU:
HF17
Vendor:
Malco
Type:
Quick Action Carbide Tipped Hole Saw
Availability:
In-Stock
$37.00 USD
Easily cut thick or layered building materials including wood, wall tile, fiberglass, plastic, even fiber-cement siding! Eject saw plugs with ease too! These carbide tipped...
SKU:
HF4
Vendor:
Malco
Type:
Quick Action Carbide Tipped Hole Saw
Availability:
In-Stock
$36.80 USD
BRAND: Malco
ID: #E200-2SH9-0109
$38.40 USD
This versatile specialized combination snip makes clean, easy straight cuts and left or right circles and squares in vinyl as well as other pliable, non-ferrous...
SKU:
ULV10
Vendor:
Malco
Type:
Compact Ultra Light Vinyl-Cutting Combination Snips
Availability:
In-Stock
$38.40 USD
Easily cut thick or layered building materials including wood, wall tile, fiberglass, plastic, even fiber-cement siding! Eject saw plugs with ease too! These carbide tipped...
SKU:
HF8
Vendor:
Malco
Type:
Quick Action Carbide Tipped Hole Saw
Availability:
In-Stock
$38.40 USD
BRAND: Malco
ID: #E200-2SH9-0111
$39.20 USD
Larger Handle Loops
Sleek Head Design Improves Maneuverability
Full 3" (76.2 mm) Cutting Length - 12"
Pressure-fit Inset Blades (Replacement blade: MC12ARB).
SKU:
MC12A
Vendor:
Malco
Type:
Classic Aluminum Handled Combination Snips
Availability:
In-Stock
$39.20 USD
Eliminates air flow restrictions from kinks and sags Increases efficiency, reduct utility bills, improve room comfort Accomodates 4-16 inch diameter, insulated or un-insulated duct Used...
SKU:
FDS1
Vendor:
Malco
Type:
Flexible Duct Support
Availability:
In-Stock
$9.90 USD
BRAND: Malco
ID: #E200-2SH9-0113
$4.70 USD
Overall Length: 1-3/4"
Insert Diameter: 1/4"
Point Size: #1
Color: Green
SKU:
SD1P
Vendor:
Malco
Type:
Square Head Chuck Driver Insert Bit
Availability:
In-Stock
$4.70 USD
BRAND: Malco
ID: #E200-2SH9-0114
$4.70 USD
Overall Length: 1-3/4"
Insert Diameter: 1/4"
Point Size: #2
Color: Red
SKU:
SD2P
Vendor:
Malco
Type:
Square Head Chuck Driver Insert Bit
Availability:
In-Stock
$4.70 USD
BRAND: Malco
ID: #E200-2SH9-0115
$39.90 USD
Extra long, hardened and tempered alloy steel “T” Handle hex keys provide extra reach and extra leverage. Plus, vinyl cushion grips and comfort provide added...
SKU:
WT9SG
Vendor:
Malco
Type:
T-Hex Key
Availability:
In-Stock
$39.90 USD
These rugged lever action tie tools feature a unique notched gripper. A clean black baked on enamel wrinkle finish will also weather the elements and...
SKU:
TY4
Vendor:
Malco
Type:
Tensioning Tools with Manual Cut Off Tie Tool
Availability:
In-Stock
$38.70 USD
BRAND: Malco
ID: #E200-2SH9-0117
$54.30 USD
Quick change pilot drill with a tight, gripping hex shank. CT - Carbide Tipped Eject saw plugs with ease Pilot drill projects 1 in. past...
SKU:
HHA5
Vendor:
Malco
Type:
Quick Release Arbor with Pilot Drill
Availability:
In-Stock
$54.30 USD
BRAND: Malco
ID: #E200-2SH9-0118
$41.50 USD
SKU:
BT131T
Vendor:
Malco
Type:
Sheet Metal Screws
Availability:
In-Stock
$41.50 USD
BRAND: Malco
ID: #E200-1S9-0379
$63.00 USD
Type: Aluminum
1,000 rivets per tub
Drill Size: #30
Diameter: 1/8"
Range: 1/16" to 1/8"
SKU:
AA42DT
Vendor:
Malco
Type:
Button Head Rivets
Availability:
In-Stock
$63.00 USD
Cuts both Stud and Runner Sizes: 1 5/8", 2 1/2", and 3 5/8" inches (4, 7, 9 cm)
Compound Leverage
Stable Base
Replaceable Blade
SKU:
SRC24A
Vendor:
Malco
Type:
Channel Shear
Availability:
In-Stock
$422.00 USD
BRAND: Malco
ID: #E200-2SH9-0121
$43.50 USD
Larger Handle Loops
Sleek Head Design Improves Maneuverability
Full 3-1/4" (82.6 mm) Cutting Length - 14"
Pressure-fit Inset Blades (Replacement Blade: MC14ARB)
SKU:
MC14A
Vendor:
Malco
Type:
Classic Aluminum Handled Combination Snips
Availability:
In-Stock
$43.50 USD
Easily cut thick or layered building materials including wood, wall tile, fiberglass, plastic, even fiber-cement siding! Eject saw plugs with ease too! These carbide tipped...
SKU:
HF18
Vendor:
Malco
Type:
Quick Action Carbide Tipped Hole Saw
Availability:
In-Stock
$43.80 USD
The Malco HP18KR Hole Punch also features ergonomic RedLine Handle technology An Engineered handle opening compliments the natural power stroke of any user’s hand and...
SKU:
HPD18
Vendor:
Malco
Type:
Punch & Die Set
Availability:
In-Stock
$44.00 USD
The Malco HP18KR Hole Punch also features ergonomic RedLine Handle technology An Engineered handle opening compliments the natural power stroke of any user’s hand and...
SKU:
HPD316
Vendor:
Malco
Type:
Punch & Die Set
Availability:
In-Stock
$44.00 USD
BRAND: Malco
ID: #E200-2SH9-0125
$43.40 USD
Larger Handle Loops
Sleek Head Design Improves Maneuverability
Full 3" (76.2 mm) Cutting Length - 12"
Pressure-fit Inset Blades (Replacement blade: MC12NRB).
SKU:
MC12NG
Vendor:
Malco
Type:
Aluminum Handled Combination Snips
Availability:
In-Stock
$43.40 USD
BRAND: Malco
ID: #E200-2SH9-0126
$44.40 USD
Type: Aluminum
1,000 rivets per tub
Drill Size: #30
Diameter: 1/8"
Range: 3/16" to 1/4"
SKU:
AA44DT
Vendor:
Malco
Type:
Button Head Rivets
Availability:
In-Stock
$44.40 USD
Handle opening that maximizes the powerful leverage of compound head-to-handle linkage while providing a more comfortable operating range for your hand Ergonomic handle contours with...
SKU:
NHP1R
Vendor:
Malco
Type:
RedLine Nail Hole Slot Punch
Availability:
In-Stock
$46.60 USD
Handle opening that maximizes the powerful leverage of compound head-to-handle linkage while providing a more comfortable operating range for your hand Ergonomic handle contours with...
SKU:
FCSR
Vendor:
Malco
Type:
RedLine Fiber Cement Siding Snip
Availability:
In-Stock
$48.00 USD
For clean, crisp bends in metal roofing materials! Quickly adjusts for making 5/8" to 4" (16 to 102 mm) bends in 29 to 22-gauge (0.36...
SKU:
ER3
Vendor:
Malco
Type:
Station Edge Roller
Availability:
In-Stock
$471.00 USD
For use with Type "A" hex head screws and Malco's Zip-In screws Hex opening of a 1/4 inch Magnetic nose keeps fastener in place while...
SKU:
HHD1S
Vendor:
Malco
Type:
Connext Magnetic Hex Driver
Availability:
In-Stock
$10.60 USD
Strong aluminum frame with comfortable vinyl grips. Big 3-inch (76 mm) high carbon steel blades with a knife-like edge. Makes precise left or right circular...
SKU:
MV12
Vendor:
Malco
Type:
Combination Cutting Snip
Availability:
In-Stock
$48.00 USD
Designed for cutting all types of hard and soft wood, and other non-ferrous materials including plywood, composition board and siding Easily replaceable alloy steel blades...
SKU:
RBW97
Vendor:
Malco
Type:
Replacement Blade
Availability:
In-Stock
$49.00 USD
Available in 19 sizes to get any number of jobs done fast! Aggressive carbide tipped teeth with deep self-cleaning gullets easily cut thick or layered...
SKU:
HF14
Vendor:
Malco
Type:
Quick Action Carbide Tipped Hole Saw
Availability:
In-Stock
$109.00 USD
One-person operation is 80% faster than traditional methods. SmartClips are installed with the aid of an easy-to-use, top loading, magazine fed SmartTool Stapler. The ergonomic...
SKU:
SM1
Vendor:
Malco
Type:
SmartTool Stapler
Availability:
In-Stock
$483.00 USD
BRAND: Malco
ID: #E200-2SH9-0134
$5.00 USD
Overall Length: 2-3/4"
Insert Diameter: 1/4"
Point Size: #2
SKU:
MBLP4P
Vendor:
Malco
Type:
Phillips Chuck Long Driver Insert Bit
Availability:
In-Stock
$5.00 USD
BRAND: Malco
ID: #E200-2SH9-0135
$5.20 USD
Overall Length: 1-15/16"
Insert Diameter: 1/4"
Point Size: #2
SKU:
MBLP3P
Vendor:
Malco
Type:
Phillips Chuck Driver Insert Bit
Availability:
In-Stock
$5.20 USD
BRAND: Malco
ID: #E200-2SH9-0136
$5.40 USD
Overall Length: 2-1/2"
Insert Diameter: 1/4"
Point Size: #1
Color: Green
SKU:
SDX1P
Vendor:
Malco
Type:
Square Head Chuck Driver Insert Bit
Availability:
In-Stock
$5.40 USD
BRAND: Malco
ID: #E200-2SH9-0137
$5.50 USD
Overall Length: 2-1/2"
Insert Diameter: 1/4"
Point Size: #2
Color: Red
SKU:
SDX2P
Vendor:
Malco
Type:
Square Head Chuck Driver Insert Bit
Availability:
In-Stock
$5.50 USD
Easily cut thick or layered building materials including wood, wall tile, fiberglass, plastic, even fiber-cement siding! Eject saw plugs with ease too! These carbide tipped...
SKU:
HF9
Vendor:
Malco
Type:
Quick Action Carbide Tipped Hole Saw
Availability:
In-Stock
$50.90 USD
Lightweight shear head for easy one-hand control.Telescoping clamp fits large or small drill housing.The rugged but inexpensive TurboShear HD cuts straight and to the left...
SKU:
TSHDRB
Vendor:
Malco
Type:
Heavy Duty Replacement Blades
Availability:
In-Stock
$51.00 USD
Handle opening that maximizes the powerful leverage of compound head-to-handle linkage while providing a more comfortable operating range for your hand Ergonomic handle contours with...
SKU:
JCCR
Vendor:
Malco
Type:
RedLine J-Channel Cutter
Availability:
In-Stock
$49.60 USD
BRAND: Malco
ID: #E200-2SH9-0141
$52.40 USD
SKU:
HW10X3/4ZT
Vendor:
Malco
Type:
Sheet Metal Screws
Availability:
In-Stock
$52.40 USD
Easily cut thick or layered building materials including wood, wall tile, fiberglass, plastic, even fiber-cement siding! Eject saw plugs with ease too! These carbide tipped...
SKU:
HF10
Vendor:
Malco
Type:
Quick Action Carbide Tipped Hole Saw
Availability:
In-Stock
$51.80 USD
BRAND: Malco
ID: #E200-2SH9-0143
$54.30 USD
Malco blind rivets provide a strong, secure connection between 2 or more sheets of material, that will not loosen with vibration. Blind rivet fasteners can...
SKU:
SS46DT
Vendor:
Malco
Type:
Button Head Rivets
Availability:
In-Stock
$54.30 USD
BRAND: Malco
ID: #E200-2SH9-0144
$54.30 USD
Quick change pilot drill with a tight, gripping hex shank. HSS - High Speed Steel Eject saw plugs with ease Pilot drill projects 1 in....
SKU:
HHA4
Vendor:
Malco
Type:
Quick Release Arbor with Pilot Drill
Availability:
In-Stock
$54.30 USD
Handle opening that maximizes the powerful leverage of compound head-to-handle linkage while providing a more comfortable operating range for your hand Ergonomic handle contours with...
SKU:
S5R
Vendor:
Malco
Type:
RedLine Hand Seamer
Availability:
In-Stock
$55.30 USD
Reamer to remove burrs
Spare cutting wheel located on outside of handle
SKU:
RTC829
Vendor:
Malco
Type:
Large Ratchet Tube Cutter
Availability:
In-Stock
$53.40 USD
Cuts hidden nails left over from removal of damaged or unwanted fiber cement siding plank without damaging overlapping plank. Flat head with beveled leading edge...
SKU:
SNC
Vendor:
Malco
Type:
Hidden Nail Cutter
Availability:
In-Stock
$106.00 USD
This blade features a 7-Pt. break away system so that you get the most use of your utility knife and keep up your productivity. Work...
SKU:
BAKRB
Vendor:
Malco
Type:
Point Break Away Blades
Availability:
In-Stock
$6.70 USD
BRAND: Malco
ID: #E200-2SH9-0148
$6.70 USD
Malco precision fit and hardened Magnetic Hex Chuck Drivers, with 1/4-inch power insert shanks, meet on-the-job demands for performance and service life whether installed on...
SKU:
MSHL516
Vendor:
Malco
Type:
Long Magnetic Hex Chuck Driver
Availability:
In-Stock
$6.70 USD
BRAND: Malco
ID: #E200-2SH9-0149
$59.00 USD
Get full use out of your Malco TSMD Double-Cut TurboShear Drill Attachment with this Double-Cut TurboShear Replacement Blade (TSMDRB).
SKU:
TSMDRB
Vendor:
Malco
Type:
Double-Cut TurboShear Replacement Blade
Availability:
In-Stock
$59.00 USD
BRAND: Malco
ID: #E200-2SH9-0150
$59.70 USD
Features: A narrower grip opening accommodates large or small hands without sacrificing generous Max2000 cutting length. All-new, ambidextrous, one-hand-operation metal latch is accessible from top...
SKU:
M2004
Vendor:
Malco
Type:
Straight Double Cut Aviation Snips
Availability:
In-Stock
$59.70 USD
Wire gauges sizes for drilling or cleaning oil and gas orifices
Metal DRILDEX container
Includes Sizes 61 to 80
Free PV1 pin vise included
SKU:
FJ6180
Vendor:
Malco
Type:
RedLine Hand Seamer
Availability:
In-Stock
$61.00 USD
Malco's Series of RedLine Tools Feature: Handle opening that maximizes the powerful leverage of compound head-to-handle linkage while providing a more comfortable operating range for...
SKU:
SL8R
Vendor:
Malco
Type:
RedLine Snap Lock Punch
Availability:
In-Stock
$61.60 USD
Staples feature two .083 x 3/4" ring-shank stainless steel nails for superior pull strength in a wooden sub-floor. Other staples for PEX to wood applications...
SKU:
PWS2
Vendor:
Malco
Type:
Wood Staple
Availability:
In-Stock
$110.00 USD
Lightweight strength
Rib-reinforced steel plate construction
High leverage, two post handle design
SKU:
DEFT1
Vendor:
Malco
Type:
Drip Edge Folding Tool
Availability:
In-Stock
$61.70 USD
Cut multiple angles in Fiber Cement Siding with Guillotine Precision and Minimal Dust.Nickel plated blade design with high leverage handle requires less force to produce...
SKU:
FCC7
Vendor:
Malco
Type:
Fiber Cement Angle Cutter
Availability:
In-Stock
$617.39 USD
Malco's Series of RedLine Tools Feature: Handle opening that maximizes the powerful leverage of compound head-to-handle linkage while providing a more comfortable operating range for...
SKU:
S9R
Vendor:
Malco
Type:
RedLine Hand Seamer
Availability:
In-Stock
$62.80 USD
Left handed cobalt pilot drills
Extra-bite straight-fluted extractors
Kit components also available separately
Make screw and bolt extraction faster
SKU:
SEK1
Vendor:
Malco
Type:
Piece Screw Extractor Kit
Availability:
In-Stock
$65.70 USD
BRAND: Malco
ID: #E200-2SH9-0157
$67.40 USD
One-piece forged, I-beam construction. Full-polished heads with beveled face and pein are corrosion resistant. Hammer sections are individually hardened and tempered for strength and resiliency....
SKU:
RH4V
Vendor:
Malco
Type:
Sheet Metal Hammer
Availability:
In-Stock
$67.40 USD
BRAND: Malco
ID: #E200-2SH9-0158
$7.00 USD
Malco precision fit and hardened Magnetic Hex Chuck Drivers, with 1/4-inch power insert shanks, meet on-the-job demands for performance and service life whether installed on...
SKU:
MSHL14
Vendor:
Malco
Type:
Long Magnetic Hex Chuck Driver
Availability:
In-Stock
$7.00 USD
3/16” T-Hex Key 9” long. Individual Red vinyl grips imprinted with sizes make these keys easy to spot on the job and easy to retrieve...
SKU:
WT9316G
Vendor:
Malco
Type:
T-Hex Key
Availability:
In-Stock
$7.00 USD
BRAND: Malco
ID: #E200-2SH9-0160
$7.12 USD
Overall Length: 1-15/16"
Insert Diameter: 1/4"
Point Size: #3
SKU:
MBLP2P
Vendor:
Malco
Type:
Phillips Chuck Driver Insert Bit
Availability:
In-Stock
$7.12 USD
BRAND: Malco
ID: #E200-2SH9-0162
$7.37 USD
A unique thread design and quality controlled manufacture spell the Zip-In® difference. Zip-In's® sophisticated heat treat process allows the screw to taper to a fine,...
SKU:
PO8X2ZWG
Vendor:
Malco
Type:
Sheet Metal Screws
Availability:
In-Stock
$7.37 USD
1/8” T-Hex Key 9” long. Individual Red vinyl grips imprinted with sizes make these keys easy to spot on the job and easy to retrieve...
SKU:
WT918G
Vendor:
Malco
Type:
T-Hex Key
Availability:
In-Stock
$7.50 USD
Versatile for a variety of metal work.
Longest lasting cutter bit.
Precision-fit sealed bearings.
Easy-adjusting pivot pin
SKU:
CBB
Vendor:
Malco
Type:
Replacement Cutter Bit for HC1 & HC2
Availability:
In-Stock
$69.10 USD
Easily cut thick or layered building materials including wood, wall tile, fiberglass, plastic, even fiber-cement siding! Eject saw plugs with ease too! These carbide tipped...
SKU:
HF19
Vendor:
Malco
Type:
Quick Action Carbide Tipped Hole Saw
Availability:
In-Stock
$71.90 USD
Use for hydronic in-floor radiant heating layout and for running potable tubing. The open case serves as the unit’s base. No tools are required to...
SKU:
UC1
Vendor:
Malco
Type:
PEX Tubing Uncoiler In Case
Availability:
In-Stock
$716.00 USD
Lightweight strength
Rib-reinforced steel plate construction
High leverage, two post handle design
SKU:
DEFT
Vendor:
Malco
Type:
Drip Edge Folding Tool
Availability:
In-Stock
$73.20 USD
Compatible Gutter Drops available by Malco
Interchangeable Dies
SKU:
GOP23XUK
Vendor:
Malco
Type:
Style Hole Gutter Outlet Die
Availability:
In-Stock
$73.35 USD
BRAND: Malco
ID: #E200-2SH9-0169
$70.90 USD
9 Piece Kit Includes: 3 Shafts each in short, medium and long varieties 1/4" Driver Shafts 5/16" Driver Shafts Stubby Handle Full Grip Handle Full Grip...
SKU:
CONNEXT4
Vendor:
Malco
Type:
Connext Kit with Ratcheting Handle
Availability:
In-Stock
$70.90 USD
Specially formulated, tough c-6 carbide tipped blade fits all popular brands of portable circular saws. Lasts up to 30 times longer than abrasive disks for...
SKU:
MCCB7
Vendor:
Malco
Type:
Steel Cutting Circular Saw Blade
Availability:
In-Stock
$76.40 USD
BRAND: Malco
ID: #E200-2SH9-0171
$77.50 USD
Replacement Blade & 2 Spacers for SRC24A Channel Shear
SKU:
10627
Vendor:
Malco
Type:
Replacement Blade & 2 Spacers for SRC24A Channel Shear
Availability:
In-Stock
$77.50 USD
BRAND: Malco
ID: #E200-2SH9-0172
$78.40 USD
Compatible Gutter Drops available by Malco
Interchangeable Dies
SKU:
GOP34UK
Vendor:
Malco
Type:
Standard Rectangular Hole Gutter Outlet Die
Availability:
In-Stock
$78.40 USD
The Malco Rp09 is a 1/4" Carbide Tipped Masonry Bit. This carbide tipped masonry bit has a 1/4" diameter, and can be used in any...
SKU:
RP09
Vendor:
Malco
Type:
Carbide Tipped Masonry Bit
Availability:
In-Stock
$8.00 USD
Features: 5/32” T-Hex Key 9” long. Individual Red vinyl grips imprinted with sizes make these keys easy to spot on the job and easy to...
SKU:
WT9532G
Vendor:
Malco
Type:
T-Hex Key
Availability:
In-Stock
$8.00 USD
Facilitates easy ratcheting action for servicing hard to access valves
Easy to use
1/4-inch diameter square shank
3/16-inch hex key diameter
1-5/8-Inch long
SKU:
RRW316
Vendor:
Malco
Type:
Hex Key Ratchet Wrench Insert
Availability:
In-Stock
$8.10 USD
The FDSH Flex Duct Knife Sheath is designed to safely carry the FDC1 Flex Duct Cutter, FDC2 Flex Duct Shear or FDC3 Multi-Purpose Shear and...
SKU:
FDSH
Vendor:
Malco
Type:
Universal Flex Duct Knife Sheath
Availability:
In-Stock
$8.60 USD
Offset handle.
Locks on either side of duct connection.
Durable steel frame makes it safe to push, hammer, and bend drive cleats
SKU:
DS1C
Vendor:
Malco
Type:
Duct Stretcher Replacement Wheel Kit
Availability:
In-Stock
$8.80 USD
BRAND: Malco
ID: #E200-2SH9-0178
$79.80 USD
Compatible Gutter Drops available by Malco
Interchangeable Dies
SKU:
GOP23UK
Vendor:
Malco
Type:
Standard Rectangular Hole Gutter Outlet Die
Availability:
In-Stock
$79.80 USD
Heavy Duty Trim Nail Punches drive trim nails into soffit, fascia and other finishing trim without denting or marring material. All-steel nose and aluminum tail...
SKU:
TNP3S
Vendor:
Malco
Type:
Mini-Size Trim Nail Punch
Availability:
In-Stock
$11.65 USD
BRAND: Malco
ID: #E200-2SH9-0179
$801.00 USD
Includes 16 Tools and a 33 Pocket TBP33 Backpack. C5R REDLINE Pipe Crimper – 5 Blade SL1R REDLINE Snap Lock Punch N1R REDLINE Hand Notcher...
SKU:
STKMRBP
Vendor:
Malco
Type:
HVAC Starter Tool Kit
Availability:
In-Stock
$801.00 USD
Discover Our Premium Tools & Test Instruments Collection
Welcome to our exclusive collection of Tools & Test Instruments, where precision meets innovation. Whether you are a professional engineer, a DIY enthusiast, or a tech hobbyist, our diverse range of high-quality tools and instruments is designed to cater to your every need.
Precision Tools for Every Task
Our collection features a variety of precision tools, including:
- Screwdrivers and Wrenches: Ergonomically designed for comfort and efficiency.
- Pliers and Cutters: Durable and reliable for all your cutting and gripping needs.
- Measuring Tools: From tape measures to calipers, ensuring accuracy in every project.
Advanced Test Instruments
Stay ahead with our state-of-the-art test instruments, perfect for diagnostics and troubleshooting:
- Multimeters: Accurate readings for voltage, current, and resistance.
- Oscilloscopes: High-performance models for detailed signal analysis.
- Thermal Imaging Cameras: Detect heat patterns and troubleshoot with ease.
Why Choose Us?
- Quality Assurance: Each tool and instrument is rigorously tested to meet industry standards.
- Expert Support: Our knowledgeable team is always ready to assist you with product selection and technical support.
- Competitive Pricing: Premium quality at prices that fit your budget.
Shop Now
Explore our Tools & Test Instruments collection and equip yourself with the best tools for the job. Shop now and experience the difference in quality and performance.