Daikin 4 Ton 16.4 SEER2 R-32 80,000 Btu Commercial Ultra Low-NOx Gas Package Air Conditioner- DHG0481D800001F
Product Overview
The Daikin DHG0481D800001F is a 4‑ton light commercial packaged gas/electric rooftop HVAC unit from Daikin’s DHG series. Built for year‑round comfort in commercial spaces such as offices, retail buildings, schools, clinics, warehouses, and similar environments, this self‑contained system offers efficient cooling paired with dependable gas heat. It uses eco‑friendly R‑32 refrigerant, a two‑stage scroll compressor, and a multi‑speed ECM blower for quiet, energy‑efficient performance. The unit is engineered for easy installation and service access with convertible airflow, an insulated cabinet, and factory‑ready controls.
Quick Facts
-
Model: DHG0481D800001F
-
Product Type: Light Commercial Packaged Gas/Electric HVAC Unit
-
Nominal Cooling Capacity: ~46,000 BTU / 4 Tons
-
Cooling Efficiency: ~16.4 SEER2 / ~12.2 EER2
-
Heating Capacity: ~80,000 BTU (medium heat range)
-
Thermal Efficiency: ~81 % AFUE
-
Compressor: Two‑Stage Scroll
-
Refrigerant: R‑32 (low GWP)
-
Voltage/Phase: 208–230 V / Typically Single‑Phase
-
Airflow: Typically ~1,570 CFM (varies by setup)
-
Cabinet: Insulated with convertible airflow and service‑friendly access
-
Installation: Rooftop or ground mount with bottom utility entry
-
Warranty: Commonly ~5 years parts and ~20 years heat exchanger (varies by registration)
$6,195.00 USD
PRODUCT INFO
Standard Features:
High-performance, low-noise two-stage scroll compressor with vibration-isolating rubber mounts.
Factory-charged with low-GWP R-32 refrigerant; includes high/low pressure safety switches and internal overload protection.
Compressor located outside condenser section to prevent air bypass.
Direct-drive airfoil SWSI supply fan with aluminum blades, ECM motor, and factory-trimmed balance for quiet, efficient airflow.
Draw-through indoor coil with copper tube/aluminum fin design, factory pressure-tested for reliability.
Microchannel condenser coils for improved heat transfer and reduced refrigerant load.
ETL-certified heating modules with Wrinkle Bend heat exchanger technology for durability and efficiency.
Tubular furnace with in-shot burners, induced draft fan, flame roll-out and high-temperature limit safety switches, airflow monitoring, and fully integrated heating controls.
Factory-wired 24V electromechanical controls, single-point power entry, and terminal strips for easy installation.
Draw-through filter section with standard off-the-shelf filters for maintenance and air quality.
Cabinet Features:
Tool-less filter access for easy service.
Fully insulated with foil-faced fiberglass to prevent sweating and thermal loss.
1-inch raised flanges on supply/return openings.
Heavy-gauge galvanized steel perimeter base rail with rigging/lifting provisions.
Flexible electrical entry via base or horizontal knockout for field installation.
SPECIFICATIONS
| Model Number(s) | DHG0481D800001F |
| Brand | Daikin |
| Type | Air Conditioning |
| Ton | 4.0 Ton |
| Cooling Btu | 46,000 |
| Cooling Stage(s) | 2 |
| Compressor Stage | Two |
| Voltage | 208/230V |
| Electrical Phase(s) | 1-Phase |
| Amp(s) | 50 |
| Maximum CFM | 1,600 |
| Refrigerant Type | R-32 |
| Height (Inches) | 43 1/2 |
| Length (Inches) | 74 |
| Width (Inches) | 48 5/16 |
| Total Shipping Weight (lbs.) | 647 |
| Parts Warranty (Years) | 5 |
| Compressor Warranty (Years) | 5 |
| UPC # | 633190265081 |

HVAC
Plumbing
Tools & Test Instruments