HVAC
Plumbing
ELECTRICAL
Tools & Test Instruments
Categories
Price
Type List
- 4-Tool Cordless Combo Kit
- Absorbent Utility Pads
- Accelerator Rapid Evacuation Kit
- Access Quick Coupler
- Acme Adapter
- Adjustable Wrench
- Adjustable Wrench Set
- Air-Acetylene Hose
- Airflow and Wind Indicator
- Airflow Balancing Meter
- Aluminum Handled Combination Snips
- Aluminum Snips
- Andy Aluminum Handled Snips
- Assisted Crimper
- Automotive Refrigerant Side Can Tap
- Aviation Mini-Snip
- Aviation Snip
- Aviation Snips
- Aviation Snips with Green Grip
- Ball Valve
- Ball Valve Set
- Battery
- Battery Pack
- Bearing for Hole Cutter
- BiMetal Metal Saw Blades
- Bit Extension
- Bit Pouch
- Bit Set
- Black Fine Point Marker
- Blade for Sure Grip Tube Slicer
- Bulldog Snips
- Button Head Rivets
- Capacitor Discharge Pen
- Carbide Tipped Masonry Bit
- Channel Shear
- Charging Hose
- Charging Hose Set
- Charging Hoses
- Chuck Key
- Clamp Meter
- Classic Aluminum Handled Combination Snips
- Clutch Driven Flaring Tool
- CO2 Cartridges
- CO2 Refill Cartridges
- CO2 Regulator
- CO2 to Nitrogen Adapter
- Coil Cleaning Machine
- Combination Cutting Snip
- Combination Pliers
- Combination Snip
- Combustion Analyzer
- Compact Battery Pack
- Compact Hydraulic Swage Tool Kit
- Compact Organizer
- Compact Ratcheting Tube Bender
- Compact Ultra Light Vinyl-Cutting Combination Snips
- Compound Leverage Stone Coated Steel Roofing Cutter
- Compute-A-Charge Electronic Refrigerant Scale
- Compute-A-Charge® Wireless Refrigerant Scale
- Connext Kit with Ratcheting Handle
- Connext Magnetic Hex Driver
- Cooler
- Cordless Drill/Driver
- Cordless Hammer Drill/Driver
- Cordless Installation Drill/Driver Kit
- Cordless Lithium-Ion Copper Tubing Cutter Kit
- Cordless Screwdriver Kit
- Core Removal Tool
- Coupling Fitting
- Crate
- Crimper
- Curved Jaw Locking Pliers
- Cutter Bit
- Cutting Wheel for Tube Cutters
- Data Logger
- Dial Thermometer
- Digital Capacitor Tester
- Digital Thermometer
- Digital Torque Wrench
- Disconnect Switch
- Double Cutting TurboShear
- Double Gripping Power Grip Caulking Gun
- Double-Cut TurboShear Replacement Blade
- Drain Cone
- Drain Dawg
- Drain Gun
- Drain Kat
- Drain Line Flush Device
- Drill Bit
- Drill Bit Set
- Drill Clamp
- Drill Set
- Drip Edge Folding Tool
- Drive Bit
- Drive Shaft
- Dual Temperature Heat Gun
- Dual-Sided Reversible Hex Driver
- Duct Board Washer
- Duct Knife
- Duct Shear
- Duct Stretcher
- Duct Stretcher Replacement Wheel Kit
- Dust Masks
- EasyHood™ Airflow Capture Hood Kit
- Electrical Cutter/Stripper/Crimper Plier
- Electrical Wire Cutter/Stripper
- Electronic Refrigerant Scale
- Equipment Tracker
- Eurocap Tamper Proof Cap
- Extended Capacity Battery Pack
- Extension Pole
- Face Mask
- Fiber Cement Angle Cutter
- Fiber Cement Mixed Gauge Set
- Fiber Cement Siding Facing Gauge
- Fiber Cement Siding Guillotine Shear
- Fiber Cement Siding Overlap Gauge
- Fin Comb
- Flaring Kit
- Flex Mini Split Adapter
- Flexible Duct Support
- Flip Utility Knife
- Foam Pig
- Foam Pig Kit
- Foamboard Staples
- Folding Jab Saw
- Folding Tool
- Folding Utility Knife
- Fuse
- Gas Test Gauge
- Gauge Boot
- Grinding Wheel
- Gutter Outlet Tool Frame
- Hacksaw Frame
- Hand Notcher
- Hand Seamer
- Hanging Strap
- Head Rivets
- Heavy Duty Replacement Blades
- Heavy Duty Trim Nail Punch
- Heavy-Duty Corded Swivel Head Shear
- Heavy-Duty Hammerdrill
- Hex Cordless Impact Driver
- Hex Cordless Impact Driver Kit
- Hex Driver
- Hex Driver®
- Hex Impact Driver Combo
- Hex Key Ratchet Wrench Insert
- Hex Key Set
- Hex Quick Change Adapter
- Hidden Nail Cutter
- High Carbon Steel Saw Blades for Wood
- High Side Gauge
- Hole Cutter
- Hole Saw
- Hose Depressor
- Hose Gasket
- HVAC Deluxe Starter Kit
- HVAC Starter Tool Kit
- Hybrid Jumper
- Impact Magnetic Nut Driver
- Infrared Thermometer
- Inspection Camera
- Inspection Camera Kit
- Internal Pipe Wrench
- Jobsite Fan
- Kobra Charging Hose
- Large Hole Saw Arbor
- Large Ratchet Tube Cutter
- Large Tool Box
- Lashing Strap
- Leak Detector
- Leak Seeker
- Left Cut Vertica Aviation Snips
- Leg Kit for Portable Mini Brake
- Lightweight Aluminum Handled Snips
- Line Set Cleaner Tool Kit
- Liquid Charging Adapter
- Lithium-Ion 1/4" Hex Cordless Impact Driver
- Lithium-Ion Cordless Recip Saw Kit
- Lithium-Ion Work Light
- Lock Punch
- Locking Tradesman Knife
- Long Magnetic Hex Chuck Driver
- Long Neck Combustible Gas Leak Detector
- Low Side Gauge
- Low-Pressure
- Low-Profile Compact Organizer
- Low-Profile Organizer
- Machine Switch
- Magjumper
- Magnetic Bit Holder
- Magnetic Gutter Screw Guide
- Magnetic Manifold Gauge Holder
- Magnetic Tape Measure
- Magnetic Umbrella
- MagneticHand Driver
- Maintenance Kit
- Manifold
- MAX Jaw
- MAX Jaw Kit
- MC-B Tank Adapter
- Megohmmeter
- Metal Scribe
- Milled Variable/Standard Reciprocating BiMetal Wood Saw Blade
- Mini Brake
- Mini Data Logger
- Mini-Size Trim Nail Punch
- Molecular Transformator
- Mounting Flood Light
- Multi Key
- Multi-Purpose Fencing Pliers
- Needle and Gasket
- Nitrile Gloves
- Nitrogen Purge Tool
- Nut Driver
- Nylon Ties
- O-Ring Seal
- O-Rings
- Offset Crimper
- Organizer
- Paint Marker
- PEX to Wire Tool
- PEX Tubing Uncoiler In Case
- Phillips Chuck Driver Insert Bit
- Phillips Chuck Long Driver Insert Bit
- Phillips Insert Bit
- Piece Screw Extractor Kit
- Pilot Bit
- Pin Actuator
- Pin Set
- Pipe and Duct Holder
- Plastic Tube Slicer
- Pliers
- Plunger Actuator
- Pocket Brake
- Pocket Tool Backpack
- Point Break Away Blades
- Pre-Assembled Damper w/ Wing Nuts
- Press Tool
- PRO-SET® Metric Torque Wrench Set
- PRO-SET® SAE Torque Wrench Set
- PRO-SET® Spark Proof Refrigerant Recovery Unit
- Punch & Die Set
- Push Switch
- Quick Action Carbide Tipped Hole Saw
- Quick Change Pilot Drill
- Quick Release Arbor with Pilot Drill
- Quick-Change Magnetic Nut Driver
- R134A Manual Automotive Coupler
- R134A Snap-N-Seal Automotive Coupler
- R410A Universal A/C Tool and Adapter Kit
- Rasping Jab Saw
- Ratchet Strap
- Ratchet Wrench Insert
- Ratcheting Driver
- Recip Saw
- Reciprocating Blade
- Reciprocating Saw
- RedLine Ceiling Grid Punch
- RedLine Downspout Crimper
- RedLine Fiber Cement Siding Snip
- RedLine Hand Seamer
- RedLine Hole Punch
- RedLine J-Channel Cutter
- RedLine Nail Hole Slot Punch
- RedLine Punch Lock Stud Crimper
- RedLine Snap Lock Punch
- Refrigerant
- Refrigeration Ratchet Wrench
- Refrigeration Temperature Recorder
- Replacement Blade
- Replacement Blade & 2 Spacers for SRC24A Channel Shear
- Replacement Blade for Stone Coated Steel Roofing Cutter
- Replacement Blade Set
- Replacement Blades
- Replacement Blades for MC14A Combination Snips
- Replacement Blades for Tin Snips
- Replacement Cartridge
- Replacement Cutter Bit for HC1 & HC2
- Replacement Drill
- Replacement Gasket
- Replacement Gauge
- Replacement Lens
- Replacement Shoe for Hole Cutte
- Replacement Spring
- Replacement Thrust Bearing for Hole Cutter
- Retractable Magnetic Jumper
- Right Angle Drill Attachment
- Right Cut Vertical Aviation Snips
- Ring Jaw
- Rolling Tool Box
- Safety Drop Cloth
- Scratch Awl
- Screwdriver
- Screwdriver Key
- Secure Seal
- Secure Seal Fitting
- Secure Seal Fitting Straight
- Setting Hammer
- Shaft Blaster
- Shaft Blaster Discs
- Sheet Metal Hammer
- Sheet Metal Screws
- Shockwave Adapter
- Shockwave Hex Nut Driver Bit
- Shockwave Phillips Bit
- Shoe Covers
- Short Magnetic Hex Chuck Driver
- Shut-Off Stem
- Side Can Tap
- Slide Valve Core Removal Tool
- SMART Pro/R Service Tool
- SMART Tool Kit
- SmartAir™ Meter
- SmartClips for SM1 Stapler
- SmartTool Stapler
- Snap Lock Punch
- Spring for Sheet Metal Tools
- Square Combination
- Square Head Chuck Driver Insert Bit
- Standard Rectangular Hole Gutter Outlet Die
- Staple Gun
- Staples
- Starter Tool Kit
- Station Edge Roller
- Steel Cutting Circular Saw Blade
- Straight Aluminum Snips
- Straight Double Cut Aviation Snips
- Straight Edge Ruler
- Straight Fitting
- Straight Jaw Locking Pliers
- Straight-Jaw Plier
- Stretch Straps
- Style Hole Gutter Outlet Die
- Super Heat Calculation Tool
- Supercomb
- Swaging Kit
- T-Hex Key
- Tamper Proof Cap
- Tank Tote
- Tape Measure
- Tapered Broach
- Temperature Alarm
- Temperature Recorder
- Temperature Recorder Replacement Charts
- Temperature Tester
- TempSmart Data Logger
- TempSmart Wireless Data Logger Kit
- Tensioning Tool
- Tensioning Tools with Manual Cut Off Tie Tool
- Termination Fitting
- Test Instrument
- Thermo-Hygrometer
- Tinner's Circumference Ruler
- Tool
- Tool Box
- Tool Case with Foam Insert
- Torch Shield
- Trammel Point
- Trim Nail Punch with Retaining Clip
- Truck Rope
- Tube Cutter
- Tube Cutters
- TurboCrimper®
- TurboShear
- TurboShear - Corrugated Metal Attachment
- TurboShear Heavy-Duty
- TurboShear Slate - Cutting Drill Attachment
- Turn Anti-Blowback Adaptor
- Universal Flex Duct Knife Sheath
- Universal Screwdriver Key
- Utility Blades 5PK
- Utility Knife
- Utility Lift
- Vacuum Gauge
- Vacuum Indicator Gauge
- Vacuum Pump
- Vacuum Pump Oil
- Valve Core Removal Tool
- VaporVue Charging Device
- Velocity Rapid Evacuation Kit
- Vent Saw Replacement Drill Bit
- Viega MegaPress Fittings
- Vinyl Fence Rail Notcher
- Voltage Tester
- Wireless Airflow Balancing and Environmental Meter
- Wireless Detector
- Wireless Dual Input Manometer
- Wireless Dual Input Manometer Kit
- Wireless P/T Gauge
- Wireless Solenoid Valve
- Wiring Harness Connector
- Wood Staple
- Wood Vent Saw
- Wood/Foamboard Stapler
TOOLS & TEST INSTRUMENTS
Items 701 to 800 of 991 total
Cleans and straightens fins
Sliding tension bars adjust to various fin sizes
Stainless steel teeth
Cushioned handle is contoured to protect your knuckles
SKU:
UFC1
Vendor:
Supco
Type:
Fin Comb
Availability:
In-Stock
$19.68 USD
Stay in the shade on scorching rooftops, and keep tools dry during rainy repairs Waterproof 60" umbrella with durable and flexible fiberglass ribs Base Swivels...
SKU:
MUKIT
Vendor:
Supco
Type:
Magnetic Umbrella
Availability:
In-Stock
$106.50 USD
BRAND: Rectorseal
ID: #RE150-1S9-0093
Available in 2-4 days
Sold Out
Replacment cloth barriers for Personal Face Mask
10-Pack
SKU:
19016
Vendor:
Rectorseal
Type:
Face Mask
Availability:
Out-Stock
Sold Out
BRAND: Rectorseal
ID: #RE150-1S9-0092
Available in 2-4 days
$193.05 USD
Swages in copper and aluminum tubing in seconds Stopper ensures a consistent length Compatible with corded and 12V cordless drills with at least 2,000 RPM...
SKU:
87011
Vendor:
Rectorseal
Type:
Swaging Kit
Availability:
In-Stock
$193.05 USD
BRAND: Rectorseal
ID: #RE150-1S9-0091
Available in 2-4 days
$141.00 USD
Flares in copper and aluminum tubing in seconds Stopper ensures a consistent length Compatible with corded and 12V cordless drills with at least 2,000 RPM...
SKU:
87001
Vendor:
Rectorseal
Type:
Flaring Kit
Availability:
In-Stock
$141.00 USD
BRAND: Rectorseal
ID: #RE150-1S9-0090
Available in 2-4 days
Sold Out
Adjustable nose clip seals and prevents fogging Lightweight mesh material that can be washed and reused Includes cloth 5-layer barrier and 2 one-way discharge valves...
SKU:
19015
Vendor:
Rectorseal
Type:
Face Mask
Availability:
Out-Stock
Sold Out
Availability:
In-Stock
$95.00 USD
Used for pressure testing all new installations for leaks
Leakage will be indicated by pressure drop on gauge
SKU:
TGB160
Vendor:
Uniweld
Type:
Gas Test Gauge
Availability:
Out-Stock
Sold Out
Used for pressure testing all new installations for leaks
Leakage will be indicated by pressure drop on
SKU:
TGB15
Vendor:
Uniweld
Type:
Gas Test Gauge
Availability:
In-Stock
$26.00 USD
Used for pressure testing all new installations for leaks
Leakage will be indicated by pressure drop on
SKU:
TGB215
Vendor:
Uniweld
Type:
Gas Test Gauge
Availability:
Out-Stock
Sold Out
Used for pressure testing all new installations for leaks
Leakage will be indicated by pressure drop on gauge
SKU:
TGB130
Vendor:
Uniweld
Type:
Gas Test Gauge
Availability:
Out-Stock
Sold Out
Used for pressure testing all new installations for leaks
Leakage will be indicated by pressure drop on gauge
SKU:
TGB30
Vendor:
Uniweld
Type:
Gas Test Gauge
Availability:
In-Stock
$23.00 USD
BRAND: Uniweld
ID: #U100-1S9-1060
Available in 2-4 days
$22.00 USD
Includes spring, depressor, square seat, o-ring and gasket
SKU:
EZHRK
Vendor:
Uniweld
Type:
Turn Anti-Blowback Adaptor
Availability:
In-Stock
$22.00 USD
BRAND: Uniweld
ID: #U100-1S9-1059
Available in 2-4 days
$30.00 USD
Reduces friction so service hose easily connects to access fitting under pressure Deep square knurling and textured band for easy fingertip control Compatible for R-410A...
SKU:
EZABM
Vendor:
Uniweld
Type:
Turn Anti-Blowback Adaptor
Availability:
In-Stock
$30.00 USD
For use with all standard manifolds
SKU:
G29LD
Vendor:
Uniweld
Type:
High Side Gauge
Availability:
In-Stock
$38.00 USD
BRAND: Uniweld
ID: #U100-1S9-1057
Available in 2-4 days
$31.00 USD
Reduces friction so service hose easily connects to access fitting under pressure Deep square knurling and textured band for easy fingertip control Compatible for R-410A...
SKU:
EZAB90
Vendor:
Uniweld
Type:
Turn Anti-Blowback Adaptor
Availability:
In-Stock
$31.00 USD
BRAND: Uniweld
ID: #U100-1S9-1056
Available in 2-4 days
$30.00 USD
Reduces friction so service hose easily connects to access fitting under pressure Deep square knurling and textured band for easy fingertip control Compatible for R-410A...
SKU:
EZAB
Vendor:
Uniweld
Type:
Turn Anti-Blowback Adaptor
Availability:
In-Stock
$30.00 USD
BRAND: Uniweld
ID: #U100-1S9-1055
Available in 2-4 days
$93.00 USD
Connects to the low side of charging manifold to increase charging rate up to 8 times Absorbs heat and flashes liquid refrigerant from the cylinder...
SKU:
VV1
Vendor:
Uniweld
Type:
VaporVue Charging Device
Availability:
In-Stock
$93.00 USD
5/16" hex head, 1/4" square drive shank
Facilitates easy ratcheting action for servicing hard-to-access valves common in air conditioning and refrigeration condensing units
SKU:
RRW5/16
Vendor:
Malco
Type:
Ratcheting Driver
Availability:
In-Stock
$8.50 USD
Quick-connect handle accepts 1/4" hex shank power drive or insert bit Ratcheting handle features forward or reverse ratcheting mechanism Clear molded handles are shock and...
SKU:
CONNEXT3
Vendor:
Malco
Type:
Ratcheting Driver
Availability:
In-Stock
$10.33 USD
Precision fit and hardened components
Connext quick change handles accept any 1/4" shank hex driver
Hex drivers are color coded for easy size identification
SKU:
HHD1
Vendor:
Malco
Type:
Aviation Snip
Availability:
In-Stock
$15.91 USD
Precision fit and hardened components
Connext quick change handles accept any 1/4" shank hex driver
Hex drivers are color coded for easy size identification
SKU:
HHD2
Vendor:
Malco
Type:
Aviation Snip
Availability:
In-Stock
$16.35 USD
Hardened alloy steel blades offer maximum cutting life
Fast adjusting, long life pivot bolt
Ultra smooth corrosion resistant finish
SKU:
M2006C
Vendor:
Malco
Type:
Aviation Snip
Availability:
Out-Stock
Sold Out
Hardened alloy steel blades offer maximum cutting life
Fast adjusting, long life pivot bolt
Ultra smooth corrosion resistant finish
SKU:
M2007C
Vendor:
Malco
Type:
Aviation Snip
Availability:
In-Stock
$63.00 USD
2-in-1 adjustment features long stroke for most hand riveting applications and short "ratchet action" power stroke for setting larger diameter rivets Interchangeable nose pieces for...
SKU:
2N1
Vendor:
Malco
Type:
Head Rivets
Availability:
In-Stock
$94.63 USD
Availability:
In-Stock
$41.68 USD
Availability:
In-Stock
$23.52 USD
Easily and quickly crimp large diameter duct and multiple smaller duct runs Inserts into chuck of 14.4V (minimum) cordless or 7A (maximum) corded drill Crimps...
SKU:
C5A
Vendor:
Malco
Type:
Assisted Crimper
Availability:
Out-Stock
Sold Out
Expands to a 42" radius and creates an 84" diameter Minimum radius is 12" All steel construction Points are resharpenable Telescoping arms are nickel plated...
SKU:
TR42
Vendor:
Malco
Type:
Trammel Point
Availability:
In-Stock
$33.44 USD
Double-edged knife blade cleanly pierces through outer skin, insulation and liner of flexible round duct Blade cuts both directions, from any angle and around entire...
SKU:
FDC3
Vendor:
Malco
Type:
Replacement Blades
Availability:
In-Stock
$82.03 USD
For use with Malco FG1 Hole Cutters
SKU:
KBHC
Vendor:
Malco
Type:
Replacement Blades
Availability:
In-Stock
$7.73 USD
Strong lightweight polymer frame
Easy-to-grasp, protective handle loops
Designed for all weather conditions
Replacement blades are easily installed on the job
SKU:
ULC10
Vendor:
Malco
Type:
Duct Stretcher
Availability:
In-Stock
$36.26 USD
48" L x 1-1/4" W x 1/16" D
SKU:
48BS
Vendor:
Malco
Type:
Duct Stretcher
Availability:
In-Stock
$90.00 USD
Frees both hands to align and install drive cleats Tool locks on from either side of duct connection Large wheel clearance captures even misshapen flanges...
SKU:
DS3
Vendor:
Malco
Type:
Duct Stretcher
Availability:
In-Stock
$39.70 USD
Features rounded scoring edge to cut fiberboard without tearing fiberboard skin
SKU:
FGK
Vendor:
Malco
Type:
Replacement Blades
Availability:
In-Stock
$27.00 USD
For use with Malco Turboshear
SKU:
TS1RB
Vendor:
Malco
Type:
Replacement Blades
Availability:
In-Stock
$31.80 USD
REDLINE™ ergonomically contoured non-slip handles Joins sheet metal, duct and pipe sections Raises a louvered projection on metal edge for locking into rolled edge of...
SKU:
SL2R
Vendor:
Malco
Type:
Offset Crimper
Availability:
In-Stock
$43.55 USD
Lightweight, compact size and slim nose projection Interchangeable nose pieces for sizes 3/32", 1/8", 5/32", and 3/16" Not for use with 5/32" or 3/16" steel...
SKU:
CR18
Vendor:
Malco
Type:
Offset Crimper
Availability:
In-Stock
$41.50 USD
REDLINE™ ergonomically contoured non-slip handles Long, shallow crimps allow for a tighter fitting, more self supporting connection Latch allows for easy open and close with...
SKU:
C6R
Vendor:
Malco
Type:
Offset Crimper
Availability:
In-Stock
$45.10 USD
Cuts 4" to 20" diameter holes Cutter rotates counter clockwise on a center pivot punch Includes standard 1" utility knife blade 1-1/2" blade sold separately...
SKU:
FG1
Vendor:
Malco
Type:
Hole Cutter
Availability:
Out-Stock
Sold Out
Availability:
In-Stock
$37.27 USD
Scribes a thin, accurate line time after time
Points are easily resharpenable or replaced
Nickel-plated steel body
SKU:
24
Vendor:
Malco
Type:
Bit Pouch
Availability:
In-Stock
$19.35 USD
Fits cordless or corded drills
Holds up to 4 driver bits
Durable, flush-fitting synthetic fabric
SKU:
PD-1EV
Vendor:
Malco
Type:
Bit Pouch
Availability:
Out-Stock
Sold Out
1-piece forged, I-beam construction
Full-polished heads with beveled face and pein are corrosion resistant Sections are individually hardened and tempered for strength and resiliency
SKU:
RH4
Vendor:
Malco
Type:
Aviation Snips
Availability:
In-Stock
$67.00 USD
135° split point to start on contact and eliminate walking
Bit at each end for twice the life
1/2" twist length
SKU:
DE18
Vendor:
Malco
Type:
Aviation Snips
Availability:
In-Stock
$24.50 USD
For use with Malco Sheet Metal Hole Cutters
SKU:
HC1E
Vendor:
Malco
Type:
Aviation Snips
Availability:
Out-Stock
Sold Out
Fabricate drip pans, register boxes, complex corners and larger transitions or plenums at the jobsite Accommodates sheet metal up to 48" wide Makes bends to...
SKU:
MB48B
Vendor:
Malco
Type:
Mini Brake
Availability:
In-Stock
$1,012.60 USD
Accommodates sheet metal up to 4' wide, in any length Dual-direction, cam-over style clamps keep anvil secure in any position Makes bends to 135° in...
SKU:
MB48A
Vendor:
Malco
Type:
Mini Brake
Availability:
In-Stock
$469.00 USD
1-piece forged, I-beam construction Full-polished heads with beveled face and pein are corrosion resistant Sections are individually hardened and tempered for strength and resiliency Molded-on...
SKU:
SH3V
Vendor:
Malco
Type:
Setting Hammer
Availability:
In-Stock
$63.41 USD
Hardened alloy steel blades offer maximum cutting life Latch is accessible from left, right or top Fast adjusting, long life pivot bolt Easy replacement of...
SKU:
M2003
Vendor:
Malco
Type:
Aviation Snips
Availability:
Out-Stock
Sold Out
Cuts insulated flexible round duct and duct wire rib coil Heavy-duty wire cutter is located away from scissor blades Thumb operated latch ensures sharpened blade...
SKU:
FDC2
Vendor:
Malco
Type:
Duct Shear
Availability:
In-Stock
$59.40 USD
For straight, left and right cuts
Cuts circles down to a 6" diameter
Strong lightweight aluminum frame
Long life inlaid steel blades
SKU:
MC12N
Vendor:
Malco
Type:
Combination Snip
Availability:
In-Stock
$41.50 USD
Hardened alloy steel blades offer maximum cutting life Latch is accessible from left, right or top Fast adjusting, long life pivot bolt Easy replacement of...
SKU:
M2005
Vendor:
Malco
Type:
Bulldog Snips
Availability:
In-Stock
$30.78 USD
Measure, mark and scribe trim lines in one easy operation Adjustable from 1/4" to 12-1/2" No special point required — uses a standard 6 x...
SKU:
A60
Vendor:
Malco
Type:
Metal Scribe
Availability:
In-Stock
$17.64 USD
Hardened alloy steel blades offer maximum cutting life Latch is accessible from left, right or top Fast adjusting, long life pivot bolt Easy replacement of...
SKU:
M2001
Vendor:
Malco
Type:
Aviation Snips
Availability:
In-Stock
$29.31 USD
REDLINE™ ergonomically contoured non-slip handles Hook design of cutting jaw facilitates notching to desired depth without slippage Latch allows for easy open and close with...
SKU:
N2R
Vendor:
Malco
Type:
Scratch Awl
Availability:
In-Stock
$59.53 USD
Scribes lines on sheet metal, plastic and a variety of other materials 1/4" x 4" blade is tapered and can be resharpened many times Handle...
SKU:
A20
Vendor:
Malco
Type:
Scratch Awl
Availability:
In-Stock
$7.52 USD
REDLINE™ ergonomically contoured non-slip handles Hook design of cutting jaw facilitates notching to desired depth without slippage Latch allows for easy open and close with...
SKU:
N1R
Vendor:
Malco
Type:
Hand Notcher
Availability:
In-Stock
$52.92 USD
Accepts 1/4" hex power bits
Ball bearing on holder provides positive lock on 1/4" hex shank power bits
Made of tempered steel
SKU:
BHE6
Vendor:
Malco
Type:
Bit Extension
Availability:
In-Stock
$13.72 USD
Scribes a thin, accurate line time after time
Points are easily resharpenable or replaced
Nickel-plated steel body
SKU:
18
Vendor:
Malco
Type:
Aviation Snips
Availability:
In-Stock
$15.36 USD
Strong molded plastic frame with chrome pocket clip
Multi-view vial reads top, bottom or side
Ideal for leveling thermostats
SKU:
L5
Vendor:
Malco
Type:
Aviation Snips
Availability:
In-Stock
$6.84 USD
Hardened alloy steel blades offer maximum cutting life Latch is accessible from left, right or top Fast adjusting, long life pivot bolt Easy replacement of...
SKU:
M2007
Vendor:
Malco
Type:
Aviation Snips
Availability:
In-Stock
$40.55 USD
Scribes lines on sheet metal, plastic and a variety of other materials 1/4" x 4" blade is tapered and can be resharpened many times Handle...
SKU:
A2
Vendor:
Malco
Type:
Scratch Awl
Availability:
In-Stock
$7.18 USD
Use stretcher to hold duct in place with one hand, while slipping drive cleats in place with other hand Additional spacing holes allow wheels to...
SKU:
DS2
Vendor:
Malco
Type:
Duct Stretcher
Availability:
In-Stock
$26.45 USD
Double-edged knife blade cleanly pierces through outer skin, insulation and liner of flexible round duct Blade cuts both directions, from any angle and around entire...
SKU:
FDC1
Vendor:
Malco
Type:
Aluminum Snips
Availability:
In-Stock
$46.51 USD
Use with power drills or Connext quick change handles Hex drivers are color coded for easy size identification 1/4" power insert shanks
SKU:
MSHML516
Vendor:
Malco
Type:
Aluminum Snips
Availability:
In-Stock
$9.95 USD
For straight, left and right cuts
Cuts circles down to a 6" diameter
Strong lightweight aluminum frame
Long life inlaid steel blades
SKU:
MC14N
Vendor:
Malco
Type:
Aluminum Snips
Availability:
In-Stock
$40.50 USD
Availability:
In-Stock
$27.92 USD
For use with Malco Sheet Metal Hole Cutters
SKU:
HC1B
Vendor:
Malco
Type:
Pin Set
Availability:
In-Stock
$12.79 USD
Magnetic tipped tape measure with cushioned blade stop
Abrasion-resistant nylon coated blade
Impact-resistant, rubber-clad housing
SKU:
T425M
Vendor:
Malco
Type:
Tape Measure
Availability:
In-Stock
$19.60 USD
Accepts 1/4" hex power bits
Ball bearing on holder provides positive lock on 1/4" hex shank power bits
Made of tempered steel
SKU:
BHE10
Vendor:
Malco
Type:
Bit Extension
Availability:
In-Stock
$15.13 USD
Use with power drills or Connext quick change handles Hex drivers are color coded for easy size identification 1/4" power insert shanks
SKU:
MSH516
Vendor:
Malco
Type:
Hex Driver
Availability:
In-Stock
$5.76 USD
For straight shearing, mild curve cuts and multiple layers of material
Strong lightweight aluminum frame
Long life inlaid steel blades
SKU:
STKMR
Vendor:
Malco
Type:
Lock Punch
Availability:
Out-Stock
Sold Out
For straight shearing, mild curve cuts and multiple layers of material
Strong lightweight aluminum frame
Long life inlaid steel blades
SKU:
M12A
Vendor:
Malco
Type:
Lock Punch
Availability:
In-Stock
$36.90 USD
For straight shearing, mild curve cuts and multiple layers of material
Strong lightweight aluminum frame
Long life inlaid steel blades
SKU:
M14A
Vendor:
Malco
Type:
Aluminum Snips
Availability:
In-Stock
$36.46 USD
REDLINE™ ergonomically contoured non-slip handles Joins sheet metal, duct and pipe sections Raises a louvered projection on metal edge for locking into rolled edge of...
SKU:
SL1R
Vendor:
Malco
Type:
Lock Punch
Availability:
Out-Stock
Sold Out
Long L-style keys for hard-to-reach applications
Tough alloy steel with black oxide finish
Includes 5/64", 3/32", 1/8", 5/32", 3/16", 7/32" and 1/4"
SKU:
W12
Vendor:
Malco
Type:
Hex Key Set
Availability:
In-Stock
$27.41 USD
Availability:
In-Stock
$23.10 USD
Ergonomically contoured non-slip handles
Latch allows for easy open and close with 1 hand
SKU:
SC3R
Vendor:
Malco
Type:
Crimper
Availability:
In-Stock
$43.12 USD
Places common trim lines on sheet metal quickly and accurately Dual-edged scribing points Creates clean, readable score lines parallel to edge of metal sheet Ten...
SKU:
A40
Vendor:
Malco
Type:
Metal Scribe
Availability:
In-Stock
$5.28 USD
Use with power drills or Connext quick change handles Hex drivers are color coded for easy size identification 1/4" power insert shanks
SKU:
SH3
Vendor:
Malco
Type:
Setting Hammer
Availability:
In-Stock
$57.00 USD
Use with power drills or Connext quick change handles Hex drivers are color coded for easy size identification 1/4" power insert shanks
SKU:
MSH14
Vendor:
Malco
Type:
Hex Driver
Availability:
In-Stock
$4.72 USD
Availability:
In-Stock
$15.20 USD
Ergonomically contoured non-slip handles Scaled depth marks on jaws are in 1/4" increments for precise depth bends Latch allows for easy open and close with...
SKU:
S6R
Vendor:
Malco
Type:
Hand Seamer
Availability:
In-Stock
$76.70 USD
Use with power drills or Connext quick change handles Hex drivers are color coded for easy size identification 1/4" power insert shanks
SKU:
MSHML14
Vendor:
Malco
Type:
Nut Driver
Availability:
In-Stock
$8.57 USD
Hardened alloy steel blades offer maximum cutting life Latch is accessible from left, right or top Fast adjusting, long life pivot bolt Easy replacement of...
SKU:
M2006
Vendor:
Malco
Type:
Nut Driver
Availability:
In-Stock
$39.20 USD
1/4", 5/16", 3/8" and 7/16" hex sizes
Positive locking telescoping shaft
High torque, non-slip over-molded grip
SKU:
4IN1
Vendor:
Malco
Type:
Nut Driver
Availability:
In-Stock
$16.40 USD
Use with power drills or Connext quick change handles Hex drivers are color coded for easy size identification 1/4" power insert shanks
SKU:
MSHXL14
Vendor:
Malco
Type:
Hex Driver
Availability:
In-Stock
$14.70 USD
Double-edged knife with regular and serrated edges 6" blade cuts duct board and flexible duct Cushion grip handle for comfort Includes nylon sheath with belt...
SKU:
DK6S
Vendor:
Malco
Type:
Duct Knife
Availability:
In-Stock
$29.00 USD
Compact design for use in tight spaces
Forged steel jaws with serrations on lower jaw
Hardened steel-core handles
Self-opening latch
Ergonomic non-slip handle design
SKU:
AVM6
Vendor:
Malco
Type:
Aviation Snips
Availability:
Out-Stock
Sold Out
20 gauge capacity
Lightweight aluminum frame
High speed bearings, top and bottom
Installs on standard electric drill
Cuts 2" to 20" diameter
SKU:
HC2
Vendor:
Malco
Type:
Hand Seamer
Availability:
In-Stock
$90.25 USD
Ergonomically contoured non-slip handles Scaled depth marks on jaws are in 1/4" increments for precise depth bends Latch allows for easy open and close with...
SKU:
S3R
Vendor:
Malco
Type:
Hand Seamer
Availability:
In-Stock
$66.64 USD
For use with Malco Sheet Metal Hole Cutters
SKU:
CB
Vendor:
Malco
Type:
Cutter Bit
Availability:
In-Stock
$11.99 USD
Use with power drills or Connext quick change handles Hex drivers are color coded for easy size identification 1/4" power insert shanks
SKU:
MSHXL516
Vendor:
Malco
Type:
Tensioning Tool
Availability:
Out-Stock
Sold Out
Attaches nylon ties to flex duct and sheet metal take-offs Works on all ties including thin designs Comfortable cushion grip handles Adjustable with auto cut-off...
SKU:
TY6
Vendor:
Malco
Type:
Tensioning Tool
Availability:
In-Stock
$56.83 USD
20 gauge capacity
Installs on standard electric drill
Cuts 2" to 12" diameter
SKU:
HC1
Vendor:
Malco
Type:
Hole Cutter
Availability:
In-Stock
$70.70 USD
Turn your drill into a power shear Attaches to any standard 1,200 RPM corded or cordless drill with 3/8" or larger chuck 20 gauge sheet...
SKU:
TS1
Vendor:
Malco
Type:
Hex Driver
Availability:
In-Stock
$66.75 USD
Quickly swap 5/16" and 3/8" hex sizes
Easy clean magnet
Torque tested to equal one-piece driver
SKU:
MSHLC1
Vendor:
Malco
Type:
Hex Driver
Availability:
In-Stock
$7.84 USD
Quickly swap 5/16" and 3/8" hex sizes
Easy clean magnet
Torque tested to equal one-piece driver
SKU:
S2R
Vendor:
Malco
Type:
Hex Driver
Availability:
In-Stock
$58.69 USD
Quickly swap 5/16" and 3/8" hex sizes
Easy clean magnet
Torque tested to equal one-piece driver
SKU:
MSHMLC1
Vendor:
Malco
Type:
Hex Driver
Availability:
In-Stock
$12.32 USD
Discover Our Premium Tools & Test Instruments Collection
Welcome to our exclusive collection of Tools & Test Instruments, where precision meets innovation. Whether you are a professional engineer, a DIY enthusiast, or a tech hobbyist, our diverse range of high-quality tools and instruments is designed to cater to your every need.
Precision Tools for Every Task
Our collection features a variety of precision tools, including:
- Screwdrivers and Wrenches: Ergonomically designed for comfort and efficiency.
- Pliers and Cutters: Durable and reliable for all your cutting and gripping needs.
- Measuring Tools: From tape measures to calipers, ensuring accuracy in every project.
Advanced Test Instruments
Stay ahead with our state-of-the-art test instruments, perfect for diagnostics and troubleshooting:
- Multimeters: Accurate readings for voltage, current, and resistance.
- Oscilloscopes: High-performance models for detailed signal analysis.
- Thermal Imaging Cameras: Detect heat patterns and troubleshoot with ease.
Why Choose Us?
- Quality Assurance: Each tool and instrument is rigorously tested to meet industry standards.
- Expert Support: Our knowledgeable team is always ready to assist you with product selection and technical support.
- Competitive Pricing: Premium quality at prices that fit your budget.
Shop Now
Explore our Tools & Test Instruments collection and equip yourself with the best tools for the job. Shop now and experience the difference in quality and performance.