Categories
Price
Type List
- 4-Tool Cordless Combo Kit
- Absorbent Utility Pads
- Accelerator Rapid Evacuation Kit
- Access Quick Coupler
- Acme Adapter
- Adjustable Wrench
- Adjustable Wrench Set
- Air-Acetylene Hose
- Airflow and Wind Indicator
- Airflow Balancing Meter
- Aluminum Handled Combination Snips
- Aluminum Snips
- Andy Aluminum Handled Snips
- Assisted Crimper
- Automotive Refrigerant Side Can Tap
- Aviation Mini-Snip
- Aviation Snip
- Aviation Snips
- Aviation Snips with Green Grip
- Ball Valve
- Ball Valve Set
- Battery
- Battery Pack
- Bearing for Hole Cutter
- BiMetal Metal Saw Blades
- Bit Extension
- Bit Pouch
- Bit Set
- Black Fine Point Marker
- Blade for Sure Grip Tube Slicer
- Bulldog Snips
- Button Head Rivets
- Capacitor Discharge Pen
- Carbide Tipped Masonry Bit
- Channel Shear
- Charging Hose
- Charging Hose Set
- Charging Hoses
- Chuck Key
- Clamp Meter
- Classic Aluminum Handled Combination Snips
- Clutch Driven Flaring Tool
- CO2 Cartridges
- CO2 Refill Cartridges
- CO2 Regulator
- CO2 to Nitrogen Adapter
- Coil Cleaning Machine
- Combination Cutting Snip
- Combination Pliers
- Combination Snip
- Combustion Analyzer
- Compact Battery Pack
- Compact Hydraulic Swage Tool Kit
- Compact Organizer
- Compact Ratcheting Tube Bender
- Compact Ultra Light Vinyl-Cutting Combination Snips
- Compound Leverage Stone Coated Steel Roofing Cutter
- Compute-A-Charge Electronic Refrigerant Scale
- Compute-A-Charge® Wireless Refrigerant Scale
- Connext Kit with Ratcheting Handle
- Connext Magnetic Hex Driver
- Cooler
- Cordless Drill/Driver
- Cordless Hammer Drill/Driver
- Cordless Installation Drill/Driver Kit
- Cordless Lithium-Ion Copper Tubing Cutter Kit
- Cordless Screwdriver Kit
- Core Removal Tool
- Coupling Fitting
- Crate
- Crimper
- Curved Jaw Locking Pliers
- Cutter Bit
- Cutting Wheel for Tube Cutters
- Data Logger
- Dial Thermometer
- Digital Capacitor Tester
- Digital Thermometer
- Digital Torque Wrench
- Disconnect Switch
- Double Cutting TurboShear
- Double Gripping Power Grip Caulking Gun
- Double-Cut TurboShear Replacement Blade
- Drain Cone
- Drain Dawg
- Drain Gun
- Drain Kat
- Drain Line Flush Device
- Drill Bit
- Drill Bit Set
- Drill Clamp
- Drill Set
- Drip Edge Folding Tool
- Drive Bit
- Drive Shaft
- Dual Temperature Heat Gun
- Dual-Sided Reversible Hex Driver
- Duct Board Washer
- Duct Knife
- Duct Shear
- Duct Stretcher
- Duct Stretcher Replacement Wheel Kit
- Dust Masks
- EasyHood™ Airflow Capture Hood Kit
- Electrical Cutter/Stripper/Crimper Plier
- Electrical Wire Cutter/Stripper
- Electronic Refrigerant Scale
- Equipment Tracker
- Eurocap Tamper Proof Cap
- Extended Capacity Battery Pack
- Extension Pole
- Face Mask
- Fiber Cement Angle Cutter
- Fiber Cement Mixed Gauge Set
- Fiber Cement Siding Facing Gauge
- Fiber Cement Siding Guillotine Shear
- Fiber Cement Siding Overlap Gauge
- Fin Comb
- Flaring Kit
- Flex Mini Split Adapter
- Flexible Duct Support
- Flip Utility Knife
- Foam Pig
- Foam Pig Kit
- Foamboard Staples
- Folding Jab Saw
- Folding Tool
- Folding Utility Knife
- Fuse
- Gas Test Gauge
- Gauge Boot
- Grinding Wheel
- Gutter Outlet Tool Frame
- Hacksaw Frame
- Hand Notcher
- Hand Seamer
- Hanging Strap
- Head Rivets
- Heavy Duty Replacement Blades
- Heavy Duty Trim Nail Punch
- Heavy-Duty Corded Swivel Head Shear
- Heavy-Duty Hammerdrill
- Hex Cordless Impact Driver
- Hex Cordless Impact Driver Kit
- Hex Driver
- Hex Driver®
- Hex Impact Driver Combo
- Hex Key Ratchet Wrench Insert
- Hex Key Set
- Hex Quick Change Adapter
- Hidden Nail Cutter
- High Carbon Steel Saw Blades for Wood
- High Side Gauge
- Hole Cutter
- Hole Saw
- Hose Depressor
- Hose Gasket
- HVAC Deluxe Starter Kit
- HVAC Starter Tool Kit
- Hybrid Jumper
- Impact Magnetic Nut Driver
- Infrared Thermometer
- Inspection Camera
- Inspection Camera Kit
- Internal Pipe Wrench
- Jobsite Fan
- Kobra Charging Hose
- Large Hole Saw Arbor
- Large Ratchet Tube Cutter
- Large Tool Box
- Lashing Strap
- Leak Detector
- Leak Seeker
- Left Cut Vertica Aviation Snips
- Leg Kit for Portable Mini Brake
- Lightweight Aluminum Handled Snips
- Line Set Cleaner Tool Kit
- Liquid Charging Adapter
- Lithium-Ion 1/4" Hex Cordless Impact Driver
- Lithium-Ion Cordless Recip Saw Kit
- Lithium-Ion Work Light
- Lock Punch
- Locking Tradesman Knife
- Long Magnetic Hex Chuck Driver
- Long Neck Combustible Gas Leak Detector
- Low Side Gauge
- Low-Pressure
- Low-Profile Compact Organizer
- Low-Profile Organizer
- Machine Switch
- Magjumper
- Magnetic Bit Holder
- Magnetic Gutter Screw Guide
- Magnetic Manifold Gauge Holder
- Magnetic Tape Measure
- Magnetic Umbrella
- MagneticHand Driver
- Maintenance Kit
- Manifold
- MAX Jaw
- MAX Jaw Kit
- MC-B Tank Adapter
- Megohmmeter
- Metal Scribe
- Milled Variable/Standard Reciprocating BiMetal Wood Saw Blade
- Mini Brake
- Mini Data Logger
- Mini-Size Trim Nail Punch
- Molecular Transformator
- Mounting Flood Light
- Multi Key
- Multi-Purpose Fencing Pliers
- Needle and Gasket
- Nitrile Gloves
- Nitrogen Purge Tool
- Nut Driver
- Nylon Ties
- O-Ring Seal
- O-Rings
- Offset Crimper
- Organizer
- Paint Marker
- PEX to Wire Tool
- PEX Tubing Uncoiler In Case
- Phillips Chuck Driver Insert Bit
- Phillips Chuck Long Driver Insert Bit
- Phillips Insert Bit
- Piece Screw Extractor Kit
- Pilot Bit
- Pin Actuator
- Pin Set
- Pipe and Duct Holder
- Plastic Tube Slicer
- Pliers
- Plunger Actuator
- Pocket Brake
- Pocket Tool Backpack
- Point Break Away Blades
- Pre-Assembled Damper w/ Wing Nuts
- Press Tool
- PRO-SET® Metric Torque Wrench Set
- PRO-SET® SAE Torque Wrench Set
- PRO-SET® Spark Proof Refrigerant Recovery Unit
- Punch & Die Set
- Push Switch
- Quick Action Carbide Tipped Hole Saw
- Quick Change Pilot Drill
- Quick Release Arbor with Pilot Drill
- Quick-Change Magnetic Nut Driver
- R134A Manual Automotive Coupler
- R134A Snap-N-Seal Automotive Coupler
- R410A Universal A/C Tool and Adapter Kit
- Rasping Jab Saw
- Ratchet Strap
- Ratchet Wrench Insert
- Ratcheting Driver
- Recip Saw
- Reciprocating Blade
- Reciprocating Saw
- RedLine Ceiling Grid Punch
- RedLine Downspout Crimper
- RedLine Fiber Cement Siding Snip
- RedLine Hand Seamer
- RedLine Hole Punch
- RedLine J-Channel Cutter
- RedLine Nail Hole Slot Punch
- RedLine Punch Lock Stud Crimper
- RedLine Snap Lock Punch
- Refrigerant
- Refrigeration Ratchet Wrench
- Refrigeration Temperature Recorder
- Replacement Blade
- Replacement Blade & 2 Spacers for SRC24A Channel Shear
- Replacement Blade for Stone Coated Steel Roofing Cutter
- Replacement Blade Set
- Replacement Blades
- Replacement Blades for MC14A Combination Snips
- Replacement Blades for Tin Snips
- Replacement Cartridge
- Replacement Cutter Bit for HC1 & HC2
- Replacement Drill
- Replacement Gasket
- Replacement Gauge
- Replacement Lens
- Replacement Shoe for Hole Cutte
- Replacement Spring
- Replacement Thrust Bearing for Hole Cutter
- Retractable Magnetic Jumper
- Right Angle Drill Attachment
- Right Cut Vertical Aviation Snips
- Ring Jaw
- Rolling Tool Box
- Safety Drop Cloth
- Scratch Awl
- Screwdriver
- Screwdriver Key
- Secure Seal
- Secure Seal Fitting
- Secure Seal Fitting Straight
- Setting Hammer
- Shaft Blaster
- Shaft Blaster Discs
- Sheet Metal Hammer
- Sheet Metal Screws
- Shockwave Adapter
- Shockwave Hex Nut Driver Bit
- Shockwave Phillips Bit
- Shoe Covers
- Short Magnetic Hex Chuck Driver
- Shut-Off Stem
- Side Can Tap
- Slide Valve Core Removal Tool
- SMART Pro/R Service Tool
- SMART Tool Kit
- SmartAir™ Meter
- SmartClips for SM1 Stapler
- SmartTool Stapler
- Snap Lock Punch
- Spring for Sheet Metal Tools
- Square Combination
- Square Head Chuck Driver Insert Bit
- Standard Rectangular Hole Gutter Outlet Die
- Staple Gun
- Staples
- Starter Tool Kit
- Station Edge Roller
- Steel Cutting Circular Saw Blade
- Straight Aluminum Snips
- Straight Double Cut Aviation Snips
- Straight Edge Ruler
- Straight Fitting
- Straight Jaw Locking Pliers
- Straight-Jaw Plier
- Stretch Straps
- Style Hole Gutter Outlet Die
- Super Heat Calculation Tool
- Supercomb
- Swaging Kit
- T-Hex Key
- Tamper Proof Cap
- Tank Tote
- Tape Measure
- Tapered Broach
- Temperature Alarm
- Temperature Recorder
- Temperature Recorder Replacement Charts
- Temperature Tester
- TempSmart Data Logger
- TempSmart Wireless Data Logger Kit
- Tensioning Tool
- Tensioning Tools with Manual Cut Off Tie Tool
- Termination Fitting
- Test Instrument
- Thermo-Hygrometer
- Tinner's Circumference Ruler
- Tool
- Tool Box
- Tool Case with Foam Insert
- Torch Shield
- Trammel Point
- Trim Nail Punch with Retaining Clip
- Truck Rope
- Tube Cutter
- Tube Cutters
- TurboCrimper®
- TurboShear
- TurboShear - Corrugated Metal Attachment
- TurboShear Heavy-Duty
- TurboShear Slate - Cutting Drill Attachment
- Turn Anti-Blowback Adaptor
- Universal Flex Duct Knife Sheath
- Universal Screwdriver Key
- Utility Blades 5PK
- Utility Knife
- Utility Lift
- Vacuum Gauge
- Vacuum Indicator Gauge
- Vacuum Pump
- Vacuum Pump Oil
- Valve Core Removal Tool
- VaporVue Charging Device
- Velocity Rapid Evacuation Kit
- Vent Saw Replacement Drill Bit
- Viega MegaPress Fittings
- Vinyl Fence Rail Notcher
- Voltage Tester
- Wireless Airflow Balancing and Environmental Meter
- Wireless Detector
- Wireless Dual Input Manometer
- Wireless Dual Input Manometer Kit
- Wireless P/T Gauge
- Wireless Solenoid Valve
- Wiring Harness Connector
- Wood Staple
- Wood Vent Saw
- Wood/Foamboard Stapler
TOOLS & TEST INSTRUMENTS
Items 801 to 900 of 1054 total
REDLINE™ ergonomically contoured non-slip handles Long, shallow crimps allow for a tighter fitting, more self supporting connection Latch allows for easy open and close with...
SKU:
C6R
Vendor:
Malco
Type:
Offset Crimper
Availability:
In-Stock
$45.10 USD
Cuts 4" to 20" diameter holes Cutter rotates counter clockwise on a center pivot punch Includes standard 1" utility knife blade 1-1/2" blade sold separately...
SKU:
FG1
Vendor:
Malco
Type:
Hole Cutter
Availability:
Out-Stock
Sold Out
Availability:
In-Stock
$37.27 USD
Scribes a thin, accurate line time after time
Points are easily resharpenable or replaced
Nickel-plated steel body
SKU:
24
Vendor:
Malco
Type:
Bit Pouch
Availability:
In-Stock
$19.35 USD
Fits cordless or corded drills
Holds up to 4 driver bits
Durable, flush-fitting synthetic fabric
SKU:
PD-1EV
Vendor:
Malco
Type:
Bit Pouch
Availability:
Out-Stock
Sold Out
1-piece forged, I-beam construction
Full-polished heads with beveled face and pein are corrosion resistant Sections are individually hardened and tempered for strength and resiliency
SKU:
RH4
Vendor:
Malco
Type:
Aviation Snips
Availability:
In-Stock
$67.00 USD
135° split point to start on contact and eliminate walking
Bit at each end for twice the life
1/2" twist length
SKU:
DE18
Vendor:
Malco
Type:
Aviation Snips
Availability:
In-Stock
$24.50 USD
For use with Malco Sheet Metal Hole Cutters
SKU:
HC1E
Vendor:
Malco
Type:
Aviation Snips
Availability:
Out-Stock
Sold Out
Fabricate drip pans, register boxes, complex corners and larger transitions or plenums at the jobsite Accommodates sheet metal up to 48" wide Makes bends to...
SKU:
MB48B
Vendor:
Malco
Type:
Mini Brake
Availability:
In-Stock
$1,012.60 USD
Accommodates sheet metal up to 4' wide, in any length Dual-direction, cam-over style clamps keep anvil secure in any position Makes bends to 135° in...
SKU:
MB48A
Vendor:
Malco
Type:
Mini Brake
Availability:
In-Stock
$469.00 USD
1-piece forged, I-beam construction Full-polished heads with beveled face and pein are corrosion resistant Sections are individually hardened and tempered for strength and resiliency Molded-on...
SKU:
SH3V
Vendor:
Malco
Type:
Setting Hammer
Availability:
In-Stock
$63.41 USD
Hardened alloy steel blades offer maximum cutting life Latch is accessible from left, right or top Fast adjusting, long life pivot bolt Easy replacement of...
SKU:
M2003
Vendor:
Malco
Type:
Aviation Snips
Availability:
Out-Stock
Sold Out
Cuts insulated flexible round duct and duct wire rib coil Heavy-duty wire cutter is located away from scissor blades Thumb operated latch ensures sharpened blade...
SKU:
FDC2
Vendor:
Malco
Type:
Duct Shear
Availability:
In-Stock
$59.40 USD
For straight, left and right cuts
Cuts circles down to a 6" diameter
Strong lightweight aluminum frame
Long life inlaid steel blades
SKU:
MC12N
Vendor:
Malco
Type:
Combination Snip
Availability:
In-Stock
$41.50 USD
Hardened alloy steel blades offer maximum cutting life Latch is accessible from left, right or top Fast adjusting, long life pivot bolt Easy replacement of...
SKU:
M2005
Vendor:
Malco
Type:
Bulldog Snips
Availability:
In-Stock
$30.78 USD
Measure, mark and scribe trim lines in one easy operation Adjustable from 1/4" to 12-1/2" No special point required — uses a standard 6 x...
SKU:
A60
Vendor:
Malco
Type:
Metal Scribe
Availability:
In-Stock
$17.64 USD
Hardened alloy steel blades offer maximum cutting life Latch is accessible from left, right or top Fast adjusting, long life pivot bolt Easy replacement of...
SKU:
M2001
Vendor:
Malco
Type:
Aviation Snips
Availability:
In-Stock
$29.31 USD
REDLINE™ ergonomically contoured non-slip handles Hook design of cutting jaw facilitates notching to desired depth without slippage Latch allows for easy open and close with...
SKU:
N2R
Vendor:
Malco
Type:
Scratch Awl
Availability:
In-Stock
$59.53 USD
Scribes lines on sheet metal, plastic and a variety of other materials 1/4" x 4" blade is tapered and can be resharpened many times Handle...
SKU:
A20
Vendor:
Malco
Type:
Scratch Awl
Availability:
In-Stock
$7.52 USD
REDLINE™ ergonomically contoured non-slip handles Hook design of cutting jaw facilitates notching to desired depth without slippage Latch allows for easy open and close with...
SKU:
N1R
Vendor:
Malco
Type:
Hand Notcher
Availability:
In-Stock
$52.92 USD
Accepts 1/4" hex power bits
Ball bearing on holder provides positive lock on 1/4" hex shank power bits
Made of tempered steel
SKU:
BHE6
Vendor:
Malco
Type:
Bit Extension
Availability:
In-Stock
$13.72 USD
Scribes a thin, accurate line time after time
Points are easily resharpenable or replaced
Nickel-plated steel body
SKU:
18
Vendor:
Malco
Type:
Aviation Snips
Availability:
In-Stock
$15.36 USD
Strong molded plastic frame with chrome pocket clip
Multi-view vial reads top, bottom or side
Ideal for leveling thermostats
SKU:
L5
Vendor:
Malco
Type:
Aviation Snips
Availability:
In-Stock
$6.84 USD
Hardened alloy steel blades offer maximum cutting life Latch is accessible from left, right or top Fast adjusting, long life pivot bolt Easy replacement of...
SKU:
M2007
Vendor:
Malco
Type:
Aviation Snips
Availability:
In-Stock
$40.55 USD
Scribes lines on sheet metal, plastic and a variety of other materials 1/4" x 4" blade is tapered and can be resharpened many times Handle...
SKU:
A2
Vendor:
Malco
Type:
Scratch Awl
Availability:
In-Stock
$7.18 USD
Use stretcher to hold duct in place with one hand, while slipping drive cleats in place with other hand Additional spacing holes allow wheels to...
SKU:
DS2
Vendor:
Malco
Type:
Duct Stretcher
Availability:
In-Stock
$26.45 USD
Double-edged knife blade cleanly pierces through outer skin, insulation and liner of flexible round duct Blade cuts both directions, from any angle and around entire...
SKU:
FDC1
Vendor:
Malco
Type:
Aluminum Snips
Availability:
In-Stock
$46.51 USD
Use with power drills or Connext quick change handles Hex drivers are color coded for easy size identification 1/4" power insert shanks
SKU:
MSHML516
Vendor:
Malco
Type:
Aluminum Snips
Availability:
In-Stock
$9.95 USD
For straight, left and right cuts
Cuts circles down to a 6" diameter
Strong lightweight aluminum frame
Long life inlaid steel blades
SKU:
MC14N
Vendor:
Malco
Type:
Aluminum Snips
Availability:
In-Stock
$40.50 USD
Availability:
In-Stock
$27.92 USD
For use with Malco Sheet Metal Hole Cutters
SKU:
HC1B
Vendor:
Malco
Type:
Pin Set
Availability:
In-Stock
$12.79 USD
Magnetic tipped tape measure with cushioned blade stop
Abrasion-resistant nylon coated blade
Impact-resistant, rubber-clad housing
SKU:
T425M
Vendor:
Malco
Type:
Tape Measure
Availability:
In-Stock
$19.60 USD
Accepts 1/4" hex power bits
Ball bearing on holder provides positive lock on 1/4" hex shank power bits
Made of tempered steel
SKU:
BHE10
Vendor:
Malco
Type:
Bit Extension
Availability:
In-Stock
$15.13 USD
Use with power drills or Connext quick change handles Hex drivers are color coded for easy size identification 1/4" power insert shanks
SKU:
MSH516
Vendor:
Malco
Type:
Hex Driver
Availability:
In-Stock
$5.76 USD
For straight shearing, mild curve cuts and multiple layers of material
Strong lightweight aluminum frame
Long life inlaid steel blades
SKU:
STKMR
Vendor:
Malco
Type:
Lock Punch
Availability:
Out-Stock
Sold Out
For straight shearing, mild curve cuts and multiple layers of material
Strong lightweight aluminum frame
Long life inlaid steel blades
SKU:
M12A
Vendor:
Malco
Type:
Lock Punch
Availability:
In-Stock
$36.90 USD
For straight shearing, mild curve cuts and multiple layers of material
Strong lightweight aluminum frame
Long life inlaid steel blades
SKU:
M14A
Vendor:
Malco
Type:
Aluminum Snips
Availability:
In-Stock
$36.46 USD
REDLINE™ ergonomically contoured non-slip handles Joins sheet metal, duct and pipe sections Raises a louvered projection on metal edge for locking into rolled edge of...
SKU:
SL1R
Vendor:
Malco
Type:
Lock Punch
Availability:
Out-Stock
Sold Out
Long L-style keys for hard-to-reach applications
Tough alloy steel with black oxide finish
Includes 5/64", 3/32", 1/8", 5/32", 3/16", 7/32" and 1/4"
SKU:
W12
Vendor:
Malco
Type:
Hex Key Set
Availability:
In-Stock
$27.41 USD
Availability:
In-Stock
$23.10 USD
Ergonomically contoured non-slip handles
Latch allows for easy open and close with 1 hand
SKU:
SC3R
Vendor:
Malco
Type:
Crimper
Availability:
In-Stock
$43.12 USD
Places common trim lines on sheet metal quickly and accurately Dual-edged scribing points Creates clean, readable score lines parallel to edge of metal sheet Ten...
SKU:
A40
Vendor:
Malco
Type:
Metal Scribe
Availability:
In-Stock
$5.28 USD
Use with power drills or Connext quick change handles Hex drivers are color coded for easy size identification 1/4" power insert shanks
SKU:
SH3
Vendor:
Malco
Type:
Setting Hammer
Availability:
In-Stock
$57.00 USD
Use with power drills or Connext quick change handles Hex drivers are color coded for easy size identification 1/4" power insert shanks
SKU:
MSH14
Vendor:
Malco
Type:
Hex Driver
Availability:
In-Stock
$4.72 USD
Availability:
In-Stock
$15.20 USD
Ergonomically contoured non-slip handles Scaled depth marks on jaws are in 1/4" increments for precise depth bends Latch allows for easy open and close with...
SKU:
S6R
Vendor:
Malco
Type:
Hand Seamer
Availability:
In-Stock
$76.70 USD
Use with power drills or Connext quick change handles Hex drivers are color coded for easy size identification 1/4" power insert shanks
SKU:
MSHML14
Vendor:
Malco
Type:
Nut Driver
Availability:
In-Stock
$8.57 USD
Hardened alloy steel blades offer maximum cutting life Latch is accessible from left, right or top Fast adjusting, long life pivot bolt Easy replacement of...
SKU:
M2006
Vendor:
Malco
Type:
Nut Driver
Availability:
In-Stock
$39.20 USD
1/4", 5/16", 3/8" and 7/16" hex sizes
Positive locking telescoping shaft
High torque, non-slip over-molded grip
SKU:
4IN1
Vendor:
Malco
Type:
Nut Driver
Availability:
In-Stock
$16.40 USD
Use with power drills or Connext quick change handles Hex drivers are color coded for easy size identification 1/4" power insert shanks
SKU:
MSHXL14
Vendor:
Malco
Type:
Hex Driver
Availability:
In-Stock
$14.70 USD
Double-edged knife with regular and serrated edges 6" blade cuts duct board and flexible duct Cushion grip handle for comfort Includes nylon sheath with belt...
SKU:
DK6S
Vendor:
Malco
Type:
Duct Knife
Availability:
In-Stock
$29.00 USD
Compact design for use in tight spaces
Forged steel jaws with serrations on lower jaw
Hardened steel-core handles
Self-opening latch
Ergonomic non-slip handle design
SKU:
AVM6
Vendor:
Malco
Type:
Aviation Snips
Availability:
Out-Stock
Sold Out
20 gauge capacity
Lightweight aluminum frame
High speed bearings, top and bottom
Installs on standard electric drill
Cuts 2" to 20" diameter
SKU:
HC2
Vendor:
Malco
Type:
Hand Seamer
Availability:
In-Stock
$90.25 USD
Ergonomically contoured non-slip handles Scaled depth marks on jaws are in 1/4" increments for precise depth bends Latch allows for easy open and close with...
SKU:
S3R
Vendor:
Malco
Type:
Hand Seamer
Availability:
In-Stock
$66.64 USD
For use with Malco Sheet Metal Hole Cutters
SKU:
CB
Vendor:
Malco
Type:
Cutter Bit
Availability:
In-Stock
$11.99 USD
Use with power drills or Connext quick change handles Hex drivers are color coded for easy size identification 1/4" power insert shanks
SKU:
MSHXL516
Vendor:
Malco
Type:
Tensioning Tool
Availability:
Out-Stock
Sold Out
Attaches nylon ties to flex duct and sheet metal take-offs Works on all ties including thin designs Comfortable cushion grip handles Adjustable with auto cut-off...
SKU:
TY6
Vendor:
Malco
Type:
Tensioning Tool
Availability:
In-Stock
$56.83 USD
20 gauge capacity
Installs on standard electric drill
Cuts 2" to 12" diameter
SKU:
HC1
Vendor:
Malco
Type:
Hole Cutter
Availability:
In-Stock
$70.70 USD
Turn your drill into a power shear Attaches to any standard 1,200 RPM corded or cordless drill with 3/8" or larger chuck 20 gauge sheet...
SKU:
TS1
Vendor:
Malco
Type:
Hex Driver
Availability:
In-Stock
$66.75 USD
Quickly swap 5/16" and 3/8" hex sizes
Easy clean magnet
Torque tested to equal one-piece driver
SKU:
MSHLC1
Vendor:
Malco
Type:
Hex Driver
Availability:
In-Stock
$7.84 USD
Quickly swap 5/16" and 3/8" hex sizes
Easy clean magnet
Torque tested to equal one-piece driver
SKU:
S2R
Vendor:
Malco
Type:
Hex Driver
Availability:
In-Stock
$58.69 USD
Quickly swap 5/16" and 3/8" hex sizes
Easy clean magnet
Torque tested to equal one-piece driver
SKU:
MSHMLC1
Vendor:
Malco
Type:
Hex Driver
Availability:
In-Stock
$12.32 USD
Quickly swap 5/16" and 3/8" hex sizes
Easy clean magnet
Torque tested to equal one-piece driver
SKU:
MSHXLC1
Vendor:
Malco
Type:
Hex Driver
Availability:
In-Stock
$16.85 USD
Quickly swap 1/4" and 5/16" hex sizes
Easy clean magnet
Torque tested to equal one-piece driver
SKU:
MSHLC
Vendor:
Malco
Type:
Hex Driver
Availability:
In-Stock
$8.82 USD
Ergonomically contoured non-slip handles
Latch allows for easy open and close with 1 hand
SKU:
C5R
Vendor:
Malco
Type:
Hex Driver
Availability:
In-Stock
$39.10 USD
Quickly swap 1/4" and 5/16" hex sizes
Easy clean magnet
Torque tested to equal one-piece driver
SKU:
MSHMLC
Vendor:
Malco
Type:
Hex Driver
Availability:
In-Stock
$13.00 USD
Quickly swap 1/4" and 5/16" hex sizes
Easy clean magnet
Torque tested to equal one-piece driver
SKU:
MSHXLC
Vendor:
Malco
Type:
Hex Driver
Availability:
In-Stock
$20.00 USD
Quickly swap 1/4" and 5/16" hex sizes
Easy clean magnet
Torque tested to equal one-piece drivers
SKU:
MSHC
Vendor:
Malco
Type:
Hex Driver
Availability:
In-Stock
$6.55 USD
Attaches nylon ties to flex duct and sheet metal take-offs
Works on all ties including thin designs
SKU:
TY4G
Vendor:
Malco
Type:
Tensioning Tool
Availability:
In-Stock
$42.35 USD
Quickly swap 5/16" and 3/8" hex sizes
Easy clean magnet
Torque tested to equal one-piece driver
SKU:
MSHC1
Vendor:
Malco
Type:
Hex Driver®
Availability:
In-Stock
$7.10 USD
SPDT, screw terminals, 1.86" H, 12.3 oz. operating force Replaces Micro #BZ-2RQ1-A2, Arrow Hart #GP3-U2 and Unimax #2HBJ-5 Used on conveyors, packaging machinery, security alarms,...
SKU:
E47BMS04-JS
Vendor:
Eaton
Type:
Plunger Actuator
Availability:
In-Stock
$32.00 USD
BRAND: Eaton
ID: #E200-1S9-0003
$29.00 USD
SPDT, 10A @ 125VAC, 20A @ 125/250/480VAC, 2 HP @ 250VAC, screw terminals
Replaces Micro #BA-2RV636T and Unimax #2HLT136A-05
SKU:
E47CMS24-JS
Vendor:
Eaton
Type:
Machine Switch
Availability:
In-Stock
$29.00 USD
SPDT, screw terminals, 1.86" H, 12.3 oz. operating force Replaces Micro #BA-2RQ1-A2, Arrow Hart #HD3-U2 and Unimax #2HLJ-5 Used on conveyors, packaging machinery, security alarms,...
SKU:
E47CMS04-JS
Vendor:
Eaton
Type:
Plunger Actuator
Availability:
Out-Stock
Sold Out
SPDT, screw terminals, 1.19" H, 5.64 oz. operating force Replaces Micro #BA-2VR2-A2, Arrow Hart #HD3-X2 and Unimax #2HLA-5 Used on conveyors, packaging machinery, security alarms,...
SKU:
E47CMS42-JS
Vendor:
Eaton
Type:
Push Switch
Availability:
In-Stock
$37.00 USD
SPDT, screw terminals, 1.19" H, 2.5 oz. operating force Replaces Micro #BA-2RV-A2, Arrow Hart #HD3-Y2 and Unimax #2HLT-5 Used on conveyors, packaging machinery, security alarms,...
SKU:
E47CMS22-JS
Vendor:
Eaton
Type:
Push Switch
Availability:
Out-Stock
Sold Out
Normally closed, switch is on when button is out
SPST, 3/4A @ 125VAC, screw terminals, ind. #214
SKU:
E10P134ES
Vendor:
Eaton
Type:
Push Switch
Availability:
In-Stock
$9.00 USD
BRAND: Eaton
ID: #E200-1S9-0008
Sold Out
Direct replacement for major manufacturers Flag visually confirms "tripped" status Trips to off For use in residential load centers and meter breaker panels Light commercial...
SKU:
CHF250
Vendor:
Eaton
Type:
Disconnect Switch
Availability:
Out-Stock
Sold Out
Normally open switch is off when button is out
SPST, 3/4A @ 125VAC, screw terminals, ind. #213
SKU:
E10P134DS
Vendor:
Eaton
Type:
Disconnect Switch
Availability:
Out-Stock
Sold Out
Normally open switch is off when button is out
SPST, 3/4A @ 125VAC, screw terminals, ind. #213
SKU:
CL220
Vendor:
Eaton
Type:
Disconnect Switch
Availability:
In-Stock
$52.00 USD
Heavy-duty disconnect with two-position pullouts or switches
Cover remains in place when open; protective shield covers wiring
Type Non-Metallic Non-Fused
Volts 120/240
SKU:
ACD222URNM-A2
Vendor:
Eaton
Type:
Disconnect Switch
Availability:
Out-Stock
Sold Out
Heavy-duty disconnect with two-position pullouts or switches
Cover remains in place when open; protective shield covers wiring
SKU:
DPB222R
Vendor:
Eaton
Type:
Disconnect Switch
Availability:
In-Stock
$39.00 USD
60A non-fused heavy-duty disconnect
Cover remains in place when open, protective shield covers wiring
SKU:
DPU222R
Vendor:
Eaton
Type:
Disconnect Switch
Availability:
In-Stock
$34.00 USD
30A fused heavy-duty disconnects
Cover remains in place when open; protective shield covers wiring
SKU:
DPF221R
Vendor:
Eaton
Type:
Disconnect Switch
Availability:
In-Stock
$37.00 USD
For use with all standard manifolds
SKU:
49001
Vendor:
Yellow Jacket
Type:
Tool
Availability:
In-Stock
$42.00 USD
Full flow for charging and recovery
Metal valve handle
SKU:
93844
Vendor:
Yellow Jacket
Type:
Tool
Availability:
In-Stock
$43.00 USD
For use with all standard manifolds
SKU:
49101
Vendor:
Yellow Jacket
Type:
Tool
Availability:
Out-Stock
Sold Out
For use with all standard manifolds
SKU:
49133
Vendor:
Yellow Jacket
Type:
Tool
Availability:
In-Stock
$63.00 USD
For use with all standard manifolds
SKU:
49512
Vendor:
Yellow Jacket
Type:
Tool
Availability:
Out-Stock
Sold Out
Double barrier protection helps contain smaller molecules of newer refrigerants Hose rated for 4,000 PSI burst pressure and 800 PSI working pressure — approved for...
SKU:
21260
Vendor:
Yellow Jacket
Type:
Tool
Availability:
In-Stock
$52.00 USD
BRAND: Yellow Jacket
ID: #TYJ100-1S9-1164
$72.00 USD
PLUS II™ environmentally responsible, permeation resistant hose Compatible with current CFC, HCFC and HFC refrigerants and oils All hoses include standard 1/4" fitting on one...
SKU:
22072
Vendor:
Yellow Jacket
Type:
Tool
Availability:
In-Stock
$72.00 USD
Expands 3/8" to 1-1/8" O.D. tubing
Re-round deformed tube and fitting ends
Includes handles, expander heads, deburring tool and steel carrying case
SKU:
60407
Vendor:
Yellow Jacket
Type:
Tool
Availability:
In-Stock
$616.00 USD
BRAND: Yellow Jacket
ID: #TYJ100-1S9-1162
$138.00 USD
PLUS II™ environmentally responsible, permeation resistant hose Compatible with current CFC, HCFC and HFC refrigerants and oils All hoses include standard 1/4" fitting on one...
SKU:
22983
Vendor:
Yellow Jacket
Type:
Tool
Availability:
In-Stock
$138.00 USD
Double barrier protection helps contain smaller molecules of newer refrigerants Hose rated for 4,000 PSI burst pressure and 800 PSI working pressure — approved for...
SKU:
21660
Vendor:
Yellow Jacket
Type:
Tool
Availability:
In-Stock
$52.00 USD
Accurately set manifold pressure for natural or LP gas Easier to use than a manometer and more compact Special, sensitive diaphragm gauge is calibrated in...
SKU:
78055
Vendor:
Yellow Jacket
Type:
Tool
Availability:
In-Stock
$102.00 USD
For use with Yellow Jacket gas pressure test kits
Adapter fits between the barbed fitting and rubber hose
SKU:
78065
Vendor:
Yellow Jacket
Type:
Tool
Availability:
In-Stock
$9.00 USD
Allows you to close suction line for testing compressor pumping efficiency and then reopen the line to restore normal flow For 1/4", 5/16", 3/8" and...
SKU:
60665
Vendor:
Yellow Jacket
Type:
Tool
Availability:
In-Stock
$48.00 USD
Pinches off and locks on copper tubing instantly Leaves both hands free, no shutoff valves needed Trigger release
SKU:
60661
Vendor:
Yellow Jacket
Type:
Tool
Availability:
In-Stock
$32.00 USD
Used to set manifold pressure for natural or LP gas Strong magnet attached to manometer to hold in upright position Range: -2" to +15" W.C....
SKU:
78075
Vendor:
Yellow Jacket
Type:
Tool
Availability:
In-Stock
$66.00 USD
2-valve, forged brass body
Includes 3 60" hoses
2-1/2" standard gauges
SKU:
41215
Vendor:
Yellow Jacket
Type:
Tool
Availability:
In-Stock
$180.00 USD
Attaches to 60331 bender and bends tubing from the outside of the bend
SKU:
60342
Vendor:
Yellow Jacket
Type:
Tool
Availability:
Out-Stock
Sold Out