Marathon Condenser Fan Motor, 825 RPM, 1/3 HP, 208-230 V, 48Z Frame, Open Air Over

Availability:
Out-Stock
  • Frame and shaft end bracket enclosed
  • Single speed model
  • Weather resistant reversing plug
  • 30” long leads
  • Shaft with flat, unless otherwise noted
  • Shaft slinger
  • 1-5/8” Extended thru-bolts on shaft end
  • Automatic reset thermal protection
  • Lug mount kits and other accessories available, see Accessories section

$398.00 USD

Sold Out

SKU:
X086
ID:
HM101-1S9-0123

PRODUCT INFO

Applications
For horizontal or vertical shaft up mounting in heat pump applications, central air conditioning outdoor condenser fans where motor is located directly in the air stream

Features
Automatic thermal protection. Water slinger on shaft end. End bell on shaft end is totally enclosed with water slinger on shaft, end bell opposite shaft end is open. Frame drilled and tapped with two 11/64” diameter holes for capacitor mounting when required. Shaft 6” long with two flats 90° apart. Electrically reversible rotation 

SPECIFICATIONS

Nameplate Specifications
UPC722856037565
Output HP1/3 Hp
Frequency60 Hz
Current2.4 A
Service Factor1
DutyContinuous
Frame48Z
Thermal ProtectionAutomatic Lock Rotor Only
ULRecognized
Voltage208-230 V
Speed825 rpm
Phase1
Insulation ClassB
EnclosureOpen Air Over
Ambient Temperature40 °C
CSAY


Technical Specifications

Electrical TypePermanent Split Capacitor
Poles8
MountingRound - Extended Studs
Opp Drive End BearingBall
Shaft TypeSingle Special Extension
Frame Length4.75 in
Shaft Extension6.06 in
RotationSelective Counterclockwise
Frame MaterialRolled Steel
Overall Length:
12.19 in
Shaft Diameter0.500 in