Daikin 4 Ton 16.4 SEER2 R-32 115,000 Btu Commercial Gas Package Air Conditioner- DHG0483DM00001S
Product Overview
The Daikin DHG0483DM00001S is a 4‑ton light commercial packaged gas/electric rooftop HVAC unit from Daikin’s DHG series, engineered for dependable year‑round comfort in commercial buildings such as offices, retail spaces, schools, clinics, and warehouses. This self‑contained system combines efficient cooling with medium‑range gas heating in one rooftop package. It features eco‑friendly R‑32 refrigerant, a two‑stage scroll compressor, and a multi‑speed ECM blower motor for quiet, energy‑efficient operation. Designed for easy installation and serviceability, the unit includes convertible airflow orientation, an insulated cabinet, and factory‑ready controls for simplified setup and maintenance.
Quick Facts
-
Model: DHG0483DM00001S
-
Product Type: Light Commercial Packaged Gas/Electric HVAC Unit
-
Nominal Cooling Capacity: ~46,000 BTU / 4 Tons
-
Cooling Efficiency: ~16.4 SEER2 / ~12.2 EER2
-
Heating Capacity (Medium Range): ~80,000 BTU (~69,900 BTU output)
-
Thermal Efficiency: ~80 % AFUE
-
Compressor: Two‑Stage Scroll
-
Refrigerant: R‑32 (low GWP)
-
Voltage/Phase: 208–230 V / Typically 3‑Phase
-
Airflow: ~1,600 CFM (varies by setup)
-
Cabinet: Insulated with convertible airflow and easy service access
-
Installation: Rooftop or ground mount with bottom utility entry
-
Warranty: Typically ~5 years parts and ~20 years heat exchanger (varies by region)
$5,288.00 USD
PRODUCT INFO
Standard Features:
Low-noise, high-performance two-stage scroll compressors with overload protection, factory-mounted on vibration-isolating grommets.
Refrigeration circuit with high/low pressure safety switches; factory-charged with eco-friendly R‑32 refrigerant.
Direct-drive ECM airfoil supply fan (SWSI) with aluminum blades, dynamically balanced for quiet, efficient operation.
Indoor draw-through coil with copper tubes and aluminum fins; large face-area outdoor coils; microchannel condenser coils for efficiency and reduced refrigerant load.
ETL-certified heating modules with Wrinkle Bend Technology; tubular furnace design with in-shot burners, induced draft fan, flame roll-out, and airflow safety switches.
Factory-tested burners and fully integrated heating controls.
Factory-wired 24V electromechanical controls, single-point power entry, and terminal strips for easy installation.
Draw-through filter section with standard off-the-shelf filters for easy maintenance.
Cabinet Features:
Tool-less filter access and fully insulated cabinet to prevent sweating and thermal loss.
Raised 1-inch flanges on supply/return; full perimeter heavy-gauge galvanized base rail with rigging/lifting holes.
Electrical lines accessible via base or horizontal knockout for flexible installation.
SPECIFICATIONS
| Model Number(s) | DHG0483DM00001S |
| Brand | Daikin |
| Type | Air Conditioning |
| Ton | 4.0 Ton |
| Cooling Btu | 46,000 |
| Cooling Stage(s) | 2 |
| Compressor Stage | Two |
| Voltage | 208/230V |
| Electrical Phase(s) | 3-Phase |
| Amp(s) | 35 |
| Maximum CFM | 1,600 |
| Refrigerant Type | R-32 |
| Height (Inches) | 43 1/2 |
| Length (Inches) | 74 |
| Width (Inches) | 48 5/16 |
| Total Shipping Weight (lbs.) | 647 |
| Parts Warranty (Years) | 5 |
| Compressor Warranty (Years) | 5 |
| UPC # | 633190265166 |

HVAC
Plumbing
Tools & Test Instruments